16 Reasons a Scotts Riding Lawn Mower Won’t Start: SOLVED. Scotts riding lawn mower

Reviews And Comparisons Of Scotts Lawn Mowers

Scotts Mowers are produced by John Deere and thus carry one the Landscaping and outdoor equipment’s industry leader stamp of craftsmanship.

Scott as a company has been known for its lawn care products more than it has been known for lawn equipment,

but along with its famous fertilizers and aerators Scotts also manages to sell their lawn mower ranges.

Scotts primarily produced push reel mowers which are the original mowing mechanical equipment.

Scotts Reel Mowers

Reel mowers are different from the gas or electric powered rotary mowers in that they are completely powered by the human hand. They require no gas and no electric power and are essentially the ideal mowing machine for people who are conscious of their carbon foot-prints. The fact that they are not propelled by some intricate electric or other fuel powered machinery does not take away the fact that they are very capable tools and very easy to operate. Also known as cylinder mower, Reel mower have a helix-like blade arrangement rotating on a horizontal axis while the motorized Walk-behind mowers have a blade system that rotates on a vertical axis.

Scotts 2000-20

There are actual 5 steel blades that form a helix around the horizontal axle.

The heat treated blades are razor-sharp and can actually cut grass without the tearing effect that one sometimes gets on rotary mowers.

The most important part to keep in shape on these machines is the ball bearings and blades.

And by keep in shape we mean frequent lubrication and the sharpening of the blades.

The classic design of Scotts lawn mower is as enduring as the green color that is commonly put on all Scotts products.

The Reel mowers from Scotts come in 16 and 10 inch varieties and have 10-inch radial treaded tires. They can be adjusted by means of a quick snap system to 9 different height settings. Scotts reel mowers weigh at a compact 33 pounds and carry a 2-year warranty.

Reel mowers are obviously not suitable for large areas and if you are afraid that they will somehow seize up when they move to areas with stubborn grass then you’ll be glad to know that the adjustability of Scott’s reel mowers makes it much easier to get even in the areas where the grass is very stubborn. The Ball bearing reel and movement of the blades is also less clunkier and surprisingly more efficient that what one would expect in a reel mower all that you re required to do is push.

Scotts Riding Lawn Mowers

For those people who like electric or gas-powered lawn mowers or those who have large areas of lawn to cut there is a Scott lawn mower available. You would expect that to be so, especially with the Scott Brand being produced by John Deere, famous for its lawn tractors and other more sophisticated pieces of machinery. The Riding series that carries the Scotts name ranges from a 16 horsepower engine to a 25 horsepower engine with cutting decks of 42-inch and 54 inch blades respectively.

The Scotts L1742 Tractor

These are the S1642 and S2554 series respectively.

They also come with an automatic transmission or a 5.speed engine, a side discharge and mulching facility.

For several years John Deere manufactured and marketed these series of riding lawn mowers under the Scotts brand as the Sabre until 2002.

These gas powered riding lawn mowers are uncharacteristically bright red riding and because they use the John Deere design and technology John Deere continues to stock parts and still offer product support for those who own these mowers.

The final line of Scotts lawn tractors were built by John Deere. Scotts riding lawn mowers are reliable and last for quite a long while if maintained properly which is why they haven’t completely disappeared.

Scotts Lawn Mowers and Parts

The Scotts lawn mower parts have become the most sought after mowers. The fact that more parts keep being manufactured for machines that have long gone out of stock is testament of the durability and reliability of these mowers. The blades are the most important parts of a Scotts lawn mower. They have to be cleaned so that they do not rust. Then there’s the engine and all the other parts around it like the cooling fins that keep the engine cool. You can still purchase everything from spark plugs to oil filters. If you own a Scotts Lawn mower and take good care of it the chances are it will last you a long while.

Reviews Of Scotts Lawn Mowers

Scotts 2000-20 reel lawn mower At some point in your lawn moving experience, coming across a machine like the Scotts 2000-20 20-Inches Classic Push Reel Lawn Mower would make you fall in love with it on the first glance. Scotts 304 14S reel lawn mower Try the new Scotts 304-14S 14-Inch Economy Push Reel Lawn Mower with T-Style Handle and Heat-Treated Blades. Scotts 415 16S reel lawn mower The Scotts 415-16S 16-Inch Elite Push Reel Lawn Mower is considered a very reliable and frequently bought push reel mower option.

Lawn Mowers Parts

Lawn Mower Wheels Lawn mower wheels do not break very often but need to be replaced at once if a problem is discovered in them.

Lawn Mower Oil No matter the mower is manual or electric oil is always applied as it acts both as a lubricant as well as a coolant for the engine.

Lawn Mower Batteries Mainly two types of the lawn mower batteries are frequently being utilized in lawn mowers which are the lead acid batteries and the nickel cadmium or Ni-Cad batteries.

Lawn Mower Tires Lawn mower tires are an important part of lawn mowers.

Reasons a Scotts Riding Lawn Mower Won’t Start: SOLVED!

Home » Blog » Lawn Mowers » Gas-Powered Lawn Mowers » 16 Reasons a Scotts Riding Lawn Mower Won’t Start: SOLVED!

Your mower is getting older and you can no longer get it started. Before you give up on your mower and purchase a new one, check out my list below to get your mower up and running again.

A Scotts riding mower won’t start when it doesn’t get the air, spark, and fuel required.

This may be caused by a plugged air filter, wrong choke setting, dirty carburetor, clogged fuel lines, plugged fuel filter, bad spark plug, faulty ignition coil, or a weak battery.

Keep reading for additional items that can cause your Scotts mower’s starting problem. Follow all safety precautions found in your operator’s manual. This includes removing the spark plug wire prior to performing repairs.

This post may include affiliate links. Purchases made through these links may provide a commission for us, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

Follow all safety instructions provided in your equipment operator’s manual before diagnosing, repairing, or operating. Consult a professional if you don’t have the skills, or knowledge or are not in the condition to perform the repair safely.

Reasons Your Scotts Riding Mower Won’t Start

Empty Gas Tank

Your gas-powered riding mower requires gas to run. When the tank is empty, you’ll need to refill it with gas.

I only mention the lack of gas can prevent the mower from starting because, sometimes out of frustration, one can forget the most obvious reasons for a starting failure.

SOLUTION: Fill the mower with fresh gasoline with an octane level of 87-grade or higher. Choose a gas with an ethanol level no greater than 10%.

Bad or Old Fuel

Gas begins to break down and become less effective after about 30 days. It’s important to purchase fresh fuel and consume it within 30 days.

The ethanol included in gas today is an environmentally friendly substance that works fine in most vehicles, but it is not a good choice for the small engine on your Scotts mower.

Ethanol attracts moisture and when that moisture evaporates, gummy deposits can be left in the fuel system to clog fuel lines, filters, and the carburetor.

SOLUTION: Remove the old fuel. A fuel siphon pump works well. Mix a fuel additive in fresh gas before adding it to your fuel tank. Using a fuel additive like Sea Foam is a good idea after running old gas. Read more about the advantages of Sea Foam in this article.

It not only stabilizes gas but also helps clean the fuel system and reduce moisture. After adding this gas and additive mix, start the mower and allow this mixture to work its way through the fuel system.

If you are still unable to start the mower, keep going through the list to determine the cause.

Wrong Choke Position

The choke is a component installed on the mower to restrict airflow. Less airflow is needed to start a cold engine. Engaging the choke closes the choke plate so a higher concentration of fuel is used to form combustion in the cylinder.

When the choke is not placed in the closed position, a cold engine will not start. Likewise, when the choke is not in the open position, a warm engine will not start.

SOLUTION: Make sure the choke is engaged when starting a cold engine and is off when starting a warm engine.

Depending on your model, you will either have to adjust the throttle lever to engage the choke or you will have a separate choke knob.

If the throttle lever is used to close the choke, move the lever to the choke position. Once the engine starts running and warming up, adjust the lever to the full throttle position.

If your model has a choke knob separate from the throttle lever, pull the choke knob out to close the choke. Place the throttle lever in the full throttle position and start the mower. Once the engine starts and warms up, push in the choke knob so the choke is open.

If the choke is in the correct position and you are continuing to have air flow problems, check for a plugged air filter, a stuck choke, or a worn choke cable.

Plugged Air Filter

Your air filter should be cleaned or changed frequently so your engine can continue to pull in clean air. When airflow is blocked because of a plugged air filter, the engine runs hot and searches for air where ever it can find it including air remaining in the crankcase.

A plugged air filter may not only cause starting issues, but it may also cause the engine to overheat, smoke, and cause engine damage.

SOLUTION: Clean your paper air filter and replace it if very dirty or damaged.

Clean a Scotts riding lawn mower paper air filter:

  • Remove the filter from the air filter housing. Be careful to not let any dirt fall into the air intake.
  • Wipe out any dirt level in the housing with a clean cloth.
  • Tap the filter against your hand or solid surface to remove excess dirt.
  • Hold the filter up to the light to check to see if light can be seen through every area of the filter. If you cannot see the light, the filter is damaged or torn, or it no longer seals right, you must replace it.
  • Install the filter.

Clean a Scotts riding lawn foam pre-filter:

  • Quick note: The foam pre-filter is used in combination with a paper air filter to help trap dirt. Never add oil to a pre-filter because the oil will damage the primary paper air filter.
  • Inspect the foam pre-filter. If it has dark spots, is brittle, or is torn, it is time to replace it with a new one.
  • Wash the foam filter in a water and mild detergent mix. Rinse the filter until the detergent is removed.
  • Squeeze dry. To avoid tearing the filter, don’t ring it out.
  • Lay flat until completely dry.
  • Once dry, it is ready to be installed.

If your mower uses a different type of filter, refer to the operator’s manual or read Guide to Lawn Mower Air Filters.

Bad Fuel Pump

When your fuel tank is lower than the carburetor, the mower will have a fuel pump. This is required to push fuel up to the carburetor.

The fuel pump will have three ports: an inlet port, an outlet port, and a port that is connected to a line off of the crankcase that pressurizes the pump.

You may be able to visually recognize your fuel pump is bad by checking the pump for small cracks or fuel leaking. You will have to replace the fuel pump if you see cracks or fuel leaking outside of the pump.

If the fuel pump appears to be in good condition, you need to check the fuel lines to ensure fuel is getting to the fuel pump and fuel is being pumped out of the fuel pump.

Verify you are getting fuel to the fuel pump:

  • Turn off the fuel valve or use pinch pliers to stop the flow of fuel. (Not every mower has a fuel valve).
  • Disconnect the line from the inlet port of the fuel pump and place it in a container that sits lower than the fuel tank.
  • Unclamp or turn on the fuel valve and check to make sure fuel is flowing out of the tube into the container.
  • If you are not getting fuel, check the fuel lines or the fuel filter for blockage.

Verify your fuel pump is pumping fuel to the carburetor:

  • Reinstall the fuel line you took off by connecting it to the fuel pump inlet.
  • Remove the fuel line from the carburetor.
  • Place the tube in a container, start the lawn mower, and watch the end of the fuel line to make sure fuel is being pumped out of the fuel line into the container.
  • You should have a steady flow or pulsating flow of fuel coming out of the fuel line.
  • Replace the fuel pump if it is unable to consistently pump fuel out of the outlet port.

Plugged Fuel Filter

A fuel filter strains the fuel coming out of your fuel tank and running through your fuel system to keep out any dirt or debris.

Old fuel can leave gummy deposits when it evaporates. This along with dirty fuel may plug the fuel filter. A plugged filter will keep a sufficient amount of fuel from passing through the filter and may cause your Scotts starting problem.

SOLUTION: A fuel filter that is plugged must be replaced.

Clogged Fuel Line

Old fuel that gummed up can become lodged in your mower’s fuel line. Test flow through the fuel line by stopping and starting fuel flow as you check the fuel flow from fuel line sections.

SOLUTION: If you find a line with a fuel restriction, shut off the fuel supply. Remove the fuel line from the mower. Spray a carburetor cleaner into the tube and use compressed air to blow air through the tube until the line is no longer clogged.

The carburetor = cleaner is used to loosen the restriction. The air is used to dislodge it and push it out of the line. Repeat these two steps as needed. Replace the fuel line when you are unable to remove the clog.

Dirty Carburetor

The carburetor is an essential component of your lawn mower. Its function is to make sure your engine receives the right mixture of gas and air to create combustion.

Without this correct ratio of gas and air, your lawn mower may run rough and may not be able to start.

SOLUTION: Your carburetor can be replaced or cleaned. Most of the time, cleaning your carburetor will do the job, and your mower will be up and running again.

If you find any damaged parts, you may need to replace them using a carburetor rebuild kit. Replace the carburetor when cleaning the carburetor does not work.

You can find steps for cleaning your carburetor in this article.

Bad Battery, Loose Cables, or Corroded Terminals

If the mower won’t even turn over, check the battery, cables, and terminals. The battery must be charged at a reading of 12.7 volts or greater. Loose cables and corroded terminals can contribute to starting issues.

SOLUTION: Clean corroded terminals in a baking soda solution containing 2 cups of water and 3 rounded tablespoons of baking soda. Use a wire brush to scrub the terminals clean.

Test your battery with a multimeter. If you receive a reading of less than 12.7 volts, you must charge your battery. Read more about the steps and items needed to charge your battery here. If your battery does not hold a charge, you will need to replace it with a new battery.

Bad Safety Switch

A mower uses several safety switches in order to keep you safe when you are operating the lawn mower. These switches can become faulty and cause your lawn mower to not start.

SOLUTION: Test the switch using a multimeter or you can temporarily bypass the safety switch to identify a bad switch. Do not operate a mower without the safety switch installed for your safety. Always have safety switches installed and working on your equipment.

Bad Spark Plug or Loose Connection

Another reason your Scotts mower won’t start may be due to a bad spark plug connection or a damaged spark plug. A dirty spark plug can also cause intermittent spark problems.

SOLUTION: Remove your spark plug(s) and inspect it for signs of carbon buildup, cracked porcelain insulator, or burnt electrode. Replace it with a new spark plug if you find any of these conditions.

Make sure to gap them according to the manufacturer’s specifications. Securely attach the spark plug wire once you are done troubleshooting and repairing the mower.

A loose wire or wrong electrode gap can cause a starting or intermittent running problem.

Bad Ignition Switch

You insert the key into your ignition switch and turn it only to find your mower doesn’t start or even turn over. The ignition switch could be the problem.

SOLUTION: You can use a multimeter to test the ignition switch. Replace the switch if bad.

Faulty Ignition Coil

The ignition coil provides voltage to the spark plug so it can fire and start the engine. The engine will not start if the spark plug isn’t able to fire.

SOLUTION: After you verified your spark plug is in good condition, check the continuity of your ignition coil using a multimeter. Replace the ignition coil if you find a break in the continuity.

Bad Starter Solenoid

A lawn mower solenoid is an electromagnetic switch that is like an on-off switch that actuates the starter motor to turn over the engine. A click or hum when turning your ignition key is an indication to check your solenoid.

Another indication your riding mower solenoid may be bad is when a wire attached to your solenoid gets hot and begins to smoke or melt.

SOLUTION: Test your Scotts mower solenoid by following the steps here. Replace your solenoid if it is found to be bad.

Faulty Charging System

While the charging system isn’t the main reason your Scotts mower won’t start, it can contribute to a weak battery that prevents the mower from starting.

When the charging system fails to charge the battery, the battery may not be able to start the mower the next time you go to use it.

A bad stator or alternator can be the problem along with several other electrical parts. Read this article to test your charging system here using an ohmmeter.

SOLUTION: If you find the problem is in your charging system, have a small engine mechanic identify what is the actual cause of the failure. It could be several different items and you will just be guessing at the problem which gets pretty expensive.

Bad Gas Cap

The fuel tank must be able to vent allowing air to pass into and out of the tank to keep the tank pressure and atmospheric pressures equal.

The vent for the fuel tank is located in the gas cap. When the vent becomes plugged, the fuel tank will form a vacuum keeping fuel from getting to the carburetor.

SOLUTION: Replace a broken gas cap that is no longer venting properly.

Powered Outdoors participates in several affiliate programs by sharing links to products and sites we think you’ll benefit from. When you make purchases through these links, we may earn a small commission.

There are a number of reasons, mechanical and otherwise, why a mower won’t run. The good news is that fixing most all of the issues is easy enough for a DIYer to handle.

By Tony Carrick and Manasa Reddigari | Updated Aug 8, 2022 4:03 PM

We may earn revenue from the products available on this page and participate in affiliate programs.

Lawn care can be tedious, but once the grass starts growing in the spring, mowing becomes a fact of life in most neighborhoods. When you finally muster the strength to tackle that first cut of the season, there are few sounds as disheartening as that of a lawn mower engine that turns over but doesn’t start.

Before you drag the mower in for repairs or invest in costly replacement parts, first make sure that a clogged air filter, soiled spark plug, damaged safety cable, clogged mowing deck, or contaminated gas isn’t to blame. Work through the following steps, and you may be able to get your puttering grass guzzler up and running again in no time.

A lawn mower repair professional can help. Get free, no-commitment repair estimates from pros near you.

Change the lawn mower carburetor filter.

Your lawn mower’s air filter guards the carburetor and engine from debris like grass clippings and dirt. When the air filter becomes clogged or too dirty, it can prevent the engine from starting. To keep this from happening, replace paper filters—or clean or replace foam filters—after every 25 hours of engine use.

The process for removing the filter depends on whether you are operating a riding or walk-behind lawn mower. For a riding mower, turn off the engine and engage the parking brake; for a walk-behind mower, pull the spark plug wire from the plug. Then, lift the filter from its housing.

The only choice for paper filters is replacement. If you’re cleaning a foam filter, wash it in a solution of hot water and detergent to loosen grime. Allow it to dry completely, and then wipe fresh motor oil over the filter, replace it in its housing, and power up the mower—this time to the pleasant whirring of an engine in tip-top condition.

Check the spark plug.

Is your lawn mower still being stubborn? The culprit may be the spark plug, which is responsible for creating the spark that ignites the fuel in the engine. If it’s loosened, disconnected, or coated in water or carbon residue, the spark plug may be the cause of your machine’s malfunction.

Locate the spark plug, often found on the front of the mower, and disconnect the spark plug wire, revealing the plug beneath. Use a socket wrench to unscrew the spark plug and remove it.

Check the electrode and insulator. If you see buildup, spray brake cleaner onto the plug, and let it soak for several minutes before wiping it with a clean cloth. Reinstall the spark plug, first by hand, and then with a socket wrench for a final tightening. If the problem persists, consider changing the spark plug.

Clear the mower deck of debris.

The mower’s deck prevents grass clippings from showering into the air like confetti, but it also creates a place for them to collect. Grass clippings can clog the mower deck, especially while mowing a wet lawn, preventing the blade from turning.

If the starter rope seems stuck or is difficult to pull, then it’s probably due to a clogged deck. With the mower safely turned off, tip it over onto its side and examine the underbelly. If there are large clumps of cut grass caught between the blade and deck, use a trowel to scrape these clippings free. When the deck is clean again, set the mower back on its feet and start it up.

Clear the vent in the lawn mower fuel cap.

The mower started just fine, you’ve made the first few passes, then all of a sudden the mower quits. You pull the cord a few times, but the engine just sputters and dies. What’s happening? It could have something to do with the fuel cap. Most mowers have a vented fuel cap. This vent is intended to release pressure, allowing fuel to flow from the tank to the carburetor. Without the vent, the gas fumes inside the tank begin to build up, creating a vacuum that eventually becomes so strong that it stops the flow of fuel.

To find out if this is the problem, remove the gas cap to break the vacuum, then reattach it. The mower should start right up. But if the lawn mower won’t stay running and cuts off again after 10 minutes or so, you’ll need to get a new gas cap.

Clean and refill the lawn mower fuel tank.

An obvious—and often overlooked—reason your mower may not be starting is that the tank is empty or contains gas that is either old or contaminated with excess moisture and dirt. If your gas is more than a month old, use an oil siphon pump to drain it from the tank.

(It’s important to be careful as spilled oil can cause smoking, but there are other reasons this might happen. Read more about what to do when your lawn mower is smoking.)

reasons, scotts, riding, lawn, mower, start

Add fuel stabilizer to the tank.

Fill the tank with fresh fuel and a fuel stabilizer to extend the life of the gas and prevent future buildup. A clogged fuel filter is another possible reason for a lawn mower not to start. When the filter is clogged, the engine can’t access the gas that makes the system go. If your mower has a fuel filter (not all do), check to make sure it’s functioning properly.

First, remove the fuel line at the carburetor. Gas should flow out. If it doesn’t, confirm that the fuel shutoff valve isn’t accidentally closed. Then remove the fuel line that’s ahead of the fuel filter inlet. If gas runs out freely, there’s a problem with the fuel filter. Consult your owner’s manual for instructions on replacing the filter and reassembling the mower.

Inspect the safety release mechanism cable.

Your lawn mower’s reluctance to start may have nothing to do with the engine at all but rather with one of the mower’s safety features: the dead man’s control. This colorfully named safety bar must be held in place by the operator for the engine to start or run. When the bar is released, the engine stops. While this mechanism cuts down on the likelihood of horrific lawn mower accidents, it also can be the reason the mower won’t start.

The safety bar of a dead man’s control is attached to a metal cable that connects to the engine’s ignition coil, which is responsible for sending current to the spark plug. If your lawn mower’s engine won’t start, check to see if that cable is damaged or broken. If it is, you’ll need to replace it before the mower will start.

Fortunately, replacing a broken control cable is an easy job. You may, however, have to wait a few days to get the part. Jot down the serial number of your lawn mower, then head to the manufacturer’s website to order a new cable.

Check to see if the flywheel brake is fully engaged.

The flywheel helps to make the engine work smoothly through inertia. When it isn’t working properly, it will prevent the mower’s engine from working.

If it is fully engaged, it can make a mower’s pull cord hard to pull. Check the brake pad to see if it makes full contact with the flywheel and that there isn’t anything jamming the blade so the control lever can move freely.

If the flywheel brake’s key sheared, the mower may have run over something that got tangled in the blade. It is possible to replace a flywheel key, but it does require taking apart the mower.

Look out for signs that the mower needs professional repairs.

While repairing lawn mowers can be a DIY job, there are times when it can be best to ask a professional to help repair a lawn mower. If you’ve done all of the proper mower maintenance that is recommended by the manufacturer, and gone through all of the possible ways to fix the mower from the steps above, then it may be best to call a pro. Here are a few signs that indicate when a pro’s help is a good idea.

  • You see black smoke. The engine will benefit from a technician’s evaluation, as it could be cracked or something else might be worn out.
  • Excessive oil or gas usage. If you’ve changed the spark plugs, and done all of the other maintenance tasks, and the mower is consuming more than its usual amount of oil or gas, consult a professional for an evaluation.
  • The lawn mower is making a knocking sound. When a lawn mower starts making a knocking sound, something could be bent or out of alignment. It may be tough to figure this out on your own, so a pro could help.
  • A vibrating or shaking lawn mower can be a sign of a problem beyond a DIY fix. Usually something is loose or not aligning properly.

Who Makes Scotts Lawn Mowers?

There are currently two manufacturers that manufacture most of Scotts lawn mowers: American Lawn Mower Company and John Deere. American Lawn Mower Company produces the reel mowers, and John Deere produces their riding lawn mower as well as electric and gas-powered lawn mowers. They are the leading manufacturers, so your investment will be worth it for sure. You may check the Scotts lawn mower reviews if you are looking for a perfect lawn mower.

The Evolution of Scotts Lawn Mowers

The Scotts have been in the game from the very beginning of our relationship with lawn. Orlando McLean Scott founded the company in the late 19th century. Initially, they came up with a solution for the golf courses to remove weed seeds from grass seeds. Then the rest is the history. Now they produce a variety of lawn mowers for modern lawn caring.

In 1928, the company introduced its flagship product “Scotts Turf Builder”, the first fertilizer of its kind specially developed for lawns. The product surely helped the company to grow. And by the 1950s, Scotts became a household brand owing to the growth of the suburbs and the FOCUS on healthy lawns that came with it.

Fast forward to the 1970s, when the company was bought by the then technology giant ITT. With the more aggressive marketing strategy, Scotts began licensing his name to a variety of lawn mower manufacturers. And they eventually chose John Deere and the American Lawn Mower Company.

Now the company offers a variety of lawn mowers, including hand-operated, electric, and gas-powered lawn mowers (both push and self-propelled), riding lawn mowers as well as zero-turn mowers.

Who Owns Scotts Lawn Mowers?

Scotts Lawn Mowers is a well known brand in the lawn and garden care industry. Founded in 1868, the company has been providing quality lawn mowers and other products to homeowners, businesses, and commercial users for over 150 years. The company is now owned by The Scotts Miracle-Gro Company, which is the world’s largest marketer of branded consumer lawn and garden products.

Scotts Lawn Mowers began as a small, family-owned business in the Midwest and eventually grew to become a major player in the lawn and garden industry. The company’s products are sold through a variety of retailers, including big box stores, hardware stores, and garden centers. Their mowers are also available online through their website.

Scotts Lawn Mowers is known for its wide selection of mowers, ranging from walk-behind mowers to riding mowers. They also offer a variety of accessories and attachments, such as blades, trimmers, and edgers. Scotts Lawn Mowers is also known for its commitment to quality and customer service, as well as its commitment to the environment. The company has adopted a number of eco-friendly practices, such as using fewer chemicals in production and packaging and supporting local farmers and businesses.

Where are Scotts Lawn Mowers Made?

The Scotts employees have gone to great lengths to find companies that make lawnmowers that they’ll label with the Scotts label. And they found two that fitted well. As a result, John Deere manufactures their electric mowers in a variety of locations across the United States, including Waterloo Iowa, Augusta Georgia, Greeneville Tennessee, and Horicon Wisconsin. On the other hand, the American Lawn Mower Company manufactures their hand-operated lawnmowers at their Shelbyville, Indiana factory.

Are Scotts Lawn Mowers Any Good?

Scotts Lawn Mowers are one of the most popular brands of lawn mowers on the market today. With a wide variety of models to choose from, Scotts Lawn Mowers offer something for every homeowner. But when it comes to performance, are Scotts Lawn Mowers any good?

The answer is a definite yes. Scotts Lawn Mowers are known for their durability and reliability. Most models are equipped with powerful engines that can tackle any size lawn. The mowers come with a variety of features and attachments, allowing you to customize your lawn mowing experience. The company also offers a wide selection of accessories, such as mulching kits, leaf bags, and more.

In terms of performance, Scotts Lawn Mowers are some of the best on the market. The company’s models are designed to be both efficient and effective. The mowers are designed to provide a smooth, even cut on any lawn size and terrain. The engines are powerful and reliable, providing plenty of power to tackle heavier grass and weeds.

When it comes to maintenance, Scotts Lawn Mowers are also top-notch. The company’s models are designed to be easy to maintain and repair. All parts are easily accessible, making it easier to diagnose and fix any issues. The company also offers a variety of maintenance guides and tips, to ensure that your mower remains in top condition.

Overall, Scotts Lawn Mowers are some of the best on the market. They offer a variety of models, features, and attachments, to make lawn mowing easier and more efficient. The engines are powerful and reliable, while the mowers are designed to be easy to maintain and repair. If you’re looking for a reliable and durable lawn mower, then Scotts is a great choice.

Where to Buy Scotts Lawn Mowers?

If you’re looking for a reliable, easy-to-use lawn mower, then a Scotts lawn mower is a great choice. Scotts mowers are available at a number of retailers, both online and in physical stores. Here are some of the best places to buy a Scotts lawn mower.


Amazon is a great place to shop for a Scotts lawn mower if you’re looking for convenience and the widest selection. Amazon carries electric, gas, and battery-powered models, ranging from around 100 to 500.

Home Deport:

Home Depot carries a variety of Scotts mowers, ranging from electric push mowers to self-propelled models. Whether you need a basic mower or a more advanced model, you’ll find it at Home Depot. range from around 150 to 500, depending on the model you choose.


Lowe’s is another great place to buy a Scotts lawn mower. Lowe’s carries electric, gas, and battery-powered models. range from around 200 to 600, depending on the model.

Walmart: Walmart is a great place to buy a Scotts lawn mower if you’re looking for a budget-friendly option. range from around 100 to 400, depending on the model.

Tractor Supply Co.:

Tractor Supply Co. carries a wide selection of Scotts lawn mowers, ranging from electric push mowers to self-propelled models. range from around 200 to 600, depending on the model.

These are just a few of the places you can buy a Scotts lawn mower. Whether you’re looking for a basic mower or a more advanced model, there’s sure to be a Scotts mower that fits your needs and budget. Happy mowing!

Alice Cook

Hi, I am Alice Cook, a professional landscaper, and gardener. Taking care of your lawn in an effective and secure manner is my main goal. Well, I am here determined to help other lawn carers by sharing effective lawn caring and gardening solutions.

| Denial of responsibility | Contacts |RSS | DE | EN | CZ