5 Best Tire Pressure For Zero Turn Mower – Detailed Reviews. Lawn mower tire pressure

Best Tire Pressure For Zero-Turn Mowers: Important Tips You Might’ve Missed

If you’re wondering if there is a constant tire pressure for all zero-turn mowers, the answer is NO. Every riding mower’s tire pressure varies depending on grade (residential or commercial) and weight, thus the pressure cannot be the same.

Usually, tire pressure works hand in hand with traction. If your traction is off – your zero-turn mower slips off, or leaves skid marks – the first thing to check is the tire pressure which, for 9 out of 10 scenarios, is the culprit. The other one percent could be tied to the wellness of the tire itself, not the pressure of the tire. However, I’m here for all the pressure what-have-you, which is what we’d be mostly tackling in this article.

All zero-turn mowers come with their required maximum pressure that serves as the safest point for both the front and rear tires. It is also a standard for the air pressure in the front tire to be greater than that in the rear.

You’ll find the maximum measure on the sidewall of the tires, and in most cases, it never exceeds 30psi for both the front and rear.

There’s a lot to know about this topic, so let’s get into it right away!

What is The Overall Best Tire Pressure For Zero-Turn Mowers?

The overall best tire pressure for all zero-turn mowers is 14psi at the front, and 10psi at the rear. The reason why the pressure in the front tires is greater than in the rear is to aid in the proper distribution of the weight of the zero-turn mower. If the rear tires have a greater amount of pressure, the agenda for traction will be completely defeated and dangerous to consider.

Now, you might be wondering why you find a different value on the sidewall of your zero-turn tire. Perhaps you find 22psi or 25psi on the sidewall of your tires and you’re wondering why it isn’t 14psi like I mentioned earlier. The number you see on the sidewall of your tire is the number you shouldn’t exceed no matter what because it is considered highly unsafe.

When a zero-turn mower is put together, in most cases the tires are made by a different manufacturer; they have no idea what manner of terrain the tires will ride over, but they know exactly how much pressure will be harmful no matter the terrain. It is then up to you to figure out which pressure suits your terrain the most.

This is why you might have been thrown off by the several “best pressure” answers you got when you checked the web. The replies may be correct, but they are from different yard tenders with uniquely featured yards.

Tell-tale Signs The Tire Pressure Is Off on Your Zero-Turn Mower

Many things could go wrong due to improper zero-turn tire pressure. Your problem could be listed in these points. Read on to find out!

Uneven or wrong tire pressures could cause the deck of your zero-turn mower to wobble along with the entire machine, leading to an uneven cut. If the tires are overinflated, bouncing and rumbling will be frequently observed and, in turn, affect the cut quality of your turf.

If your riding mower’s tires are too full or way less than required, you will have a horrible time steering through the yard. Going over bumps will be a mind-numbing encounter and maneuvering your path will be stressful to do. If you experience any of this to a degree, you better suspect your tire’s pound per square inch.

How To Know The Best Tire Pressure For Your Zero-Turn Mower

Since the best tire pressure is determined by unique features belonging to your zero-turn mower and your yard, here’s how to know the best for you:

Air pressure will significantly decrease in colder climates and increase in hotter climates. It is important to know how your climate affects the PSI of the tires. You may have to peep in now and then to ensure the tires are not under or over-inflated.

So if you mow in intense weather conditions and you adjust the PSI to the desired number, when you realize the slightest change in cutting quality or traction, it could be due to the climate. The colder the climate, the more pressure you will need for your tires because cold temperatures influence air pressure negatively. The opposite is the case for hotter climates.

When you’re climbing an elevated plain, the distribution of weight is very crucial for your safety. That is why it’s a standard rule for the front tire psi to be greater than the rear tires. That way, you have enough weight at the front to drag you up a hill, and enough wedge to aid you down safely.

How To Regulate The Tire Pressure on Your Zero-Turn Mower

First, you need a tire pressure gauge to measure the PSI of your zero-turn mower’s tires. If you don’t have one, you can easily purchase a good gauge like the AstroAl digital gauge (view on Amazon) for just a few bucks –they give highly accurate results.

You will need an air compressor for this task. If you don’t own one, you can visit the gas station. They always have air compressors. Before you embark on this step, you should know what pressure is best for you. With the number in hand, slowly pump in the air in short intervals making sure to not exceed your desired mark. If you’re not sure of your desired mark, you can add air and run the mower around for a few minutes. Although I understand this would be rather time-consuming, it does pay in the end.

This is very easy to do. Take a blunt slender object like a key or a pen, then poke the tire valve to let the air hiss out. Do this also at short intervals and measure at every stop to be sure you don’t exceed your desired PSI.

An Interesting Tip For Checking Tire Pressure

You can check your zero-turn mower tire pressure by running across a wet puddle! It sounds ridiculous but it works. All you have to do is drive into a puddle of water and out to open dry concrete. If the tire prints appear thin, very threaded, and neatly printed, then the pressure is too high. If you find the prints to be a little blurry and just the same width as the tire, then you’re good to go.

If the tires are flat, you’d almost find no patterns on the tire print at all. It would also appear to be a little wider than the actual width of the tire.

Finally, The End of Our Trip

Always check your tire pressures because a lot of problems could be avoided if the pressure is set correctly. You might be having the worst ride of your life and loathe mowing completely because your tires have 1psi extra or less. Make sure to have a pressure gauge and tire inflator ready for grabbing.

Also, NEVER EXCEED the pound per square inch you find marked on your tires. There’s no reason to even try to– it’s not worth the hazard you will encounter. You’re allowed to decide which pressure suits you best below the mark and I suggest you take advantage of that greatly! It’s all you and the breeze when your tires are filled correctly, I guarantee you that.

EL Mehdi (Medi), the founder and voice behind Desired Lawn Mower. He is a riding mower lover and has been active in the industry for years. He’s also an entrepreneur who owns and manages multiple helpful websites.

Best Tire Pressure For Zero Turn Mower – Detailed Reviews!

The behavior of the zero turn mower when mowing directly depends on the condition of the tires. And this condition is determined by many indicators, including the air pressure and its balance between all wheels.

To monitor the tire pressure, you need the best tire pressure for zero turn mower. It is designed to measure the air pressure in the tires of zero turn mowers, cars, trucks, bicycles, motorcycles, ATVs, and other types of transport.

The tire pressure serves to measure the pressure in the tires and decrease it, if necessary. The model has a special valve designed to release excess air in case of need. Likewise, this tire pressure for zero turn mower has the unique feature that ensure increased accuracy.

This best tire pressure for zero turn mower is equipped with a special protective cover to avoid contamination and damage. The cost of the device is affordable, which also attracts many people.

Likewise, it is very sturdy and can work at different temperature ranges. The device has a stylish design and comes in different shapes and colors. All the information drivers can be easily read on the LCD.

You can also work with this device in the dark because an LED flashlight will help. Besides, some models have a metal body with additional rubber protection.

Types of tire pressure for zero turn mower

The device has a dial-scale, and after connecting the device to the tires, the arrow will indicate the result on the scale. The advantages of the device are simplicity of design, affordable price, reliable results, and fast measurement speed.

Some models have a bleed valve. You can easily bleed air to the desired mark if the tires are inflated. The disadvantages include sensitivity to moisture, subjectivity regarding the data obtained, and the need for measurements in each wheel separately.

Its work is based on a spring mechanism, and the device itself resembles a pen for writing. It is compact, reliable, and also has an affordable cost, but at the same time, it is very fragile and uncomfortable in the process of use.

Therefore, it is inferior in popularity to the switch option. Both types are referred to as analog pressure.

They are actively replacing their analog competitors. They are convenient and straightforward to use and may have some additional functions. Plus, they show the most accurate data. Their disadvantage is the measurement error in the cold season.

Factor to consider when buying the best tire pressure for zero turn mower

The most important factor to consider when buying the best tire pressure for zero turn mower. An error of 1% or less is deemed to be acceptable.

If it is more, then it is worth abandoning such a purchase. The pressure is measured in bar. The maximum value differs from model to model.

Digital with LCD screens display the results on the monitor. In some models, you can set the desired units of measure. It is believed that the figure gives more accurate readings.

Analog devices are considered reliable, but they must be used wisely. In such devices, errors most often occur when the upper limit of the range is reached. It is necessary to carry out measurements several times to ensure the result.

Standard range of diameters for tire pressure is 40, 50, 60, 63, 80, 100, 150, 160, 250 mm. If an employee has the opportunity to come close to the device during the production process, less than 2 m, then you can opt for a model of average diameter, 100 mm.

If finding the device nearby is not feasible and is from 2 to 5 m, you should opt for the tire pressure of a larger diameter, not less than 160 mm. The operator must read the pressure in the system from the pressure gauge.

When buying the best tire pressure for zero turn mower, you need to consider reliability. You are not purchasing a keychain, but an important thing. It would be best if you bought it from well-known manufacturers to work correctly and for a long time.

It must be greater than the possible tire pressure. A sufficient pressure level can be about two atmospheres in the zero lawn mower. Pay attention to the units of measurement.

In many countries, the atmospheres are considered more familiar. At the same time, the units can be changed in some models.

If you buy a tire pressure for zero lawn mower, ensure it has access to the tires. Often, drivers give their money away and find out about it when they get to work.

Best Tire Pressure For Zero Turn Mower

JACO ElitePro Digital 200 PSI Tire Pressure

Do you want the tire pressure for the zero turn mower model to ensure longer-lasting tires by just promoting an even and proper tire tread wear pattern?

Go for this JACO model because it ensures superior vehicle handling and performance for a more pleasing overall driving experience. The tire pressure not only measures the pressure in the tires for zero turn mower, but also decreases it, if necessary.

The model has a special valve designed to release excess air in case of need. Also, the device has increased accuracy. The pressure gauge is equipped with a special protective cover to avoid contamination and damage.

The model has an in-built air bleeder valve that can bleed pressure in real-time without resetting the display. This makes it ideal for trucks, cars, motorcycles, RV trailers, bikes, spare tires, zero turn mower, and much more

Similarly, it comes with a 2.5-inch high-resolution digital LCD with high visibility and is easy to read during the dark. The tire pressure is programmed to shut off automatically after 150 seconds if it is inactive to save the battery.

There is the gear-style shock-resistant protective guard, which protects against impact and drops. What is more, it has 100% solid brass and steel material that can make it durable.

• It is shock-resistant
• Protected against drops and impact
• It is pro accuracy
• Strong and rugged
• It is leak-proof
• It offers an intelligent display
• It comes with a warranty
• The LCD screen is visible even at night
• It shut-off automatically to save battery

The AstroAI model is versatile, ideal for zero turn mowers, cars, motorcycles, trucks, and bicycles. For one thing, it is designed to maintain the correct tire pressure, extend tire life, and reduce tire wear.

In all honesty, it comes with the digital display reading that clearly and instantly shows readings, so no longer guesswork of the analog gauges.

Additionally, it comes with a backlit LCD for visibility in the dimly areas. The nozzle easily forms the seal with a valve stem on the Schrader valves to give accurate and quick readings with 0.1 increments.

On the other hand, it comes with four settings that range 0-150PSI, 0-10Kgf/cm², 0-1000KPA, or 0-10Bar.

The non-slip surface make it easy to grasp onto an ergonomic design suitable for women’s and men’s hands. The model resets automatically when taking pressure, so there is no need to reset or calibrate the device. Likewise, it has an automatic shut-off in 30 to 40 seconds to save power.

• It maintains correct tire pressure
• Extend tire life
• Reduce tire wear
• Non-slip texture help to hold it easily
• Give accurate and quick readings
• It is versatile
• The backlit LCD offer visibility even in dimly light areas
• It has an ergonomic design
• Portable and ultra-slim
• Shut off automatically
• Easy to use

TiGaAT Digital Heavy-Duty Tire 200 PSI Pressure

This product from TiGaAT is designed to monitor the tire pressure of a zero turn mower. It copes with its functions perfectly. Users note that the model is notable for the accuracy of the readings. Equally important, it gives you simple access to the monitor and easy to read tire pressure.

Similarly, it comes with a 3x LCD screen that displays clear and large numbers in four units according to your preference. Its measurement ranges from 0 to 200 PSI.

The model has sturdy metal, which provides lasting performance. There is a rubber protective pad, which helps it withstand vibration and a drop of about one meter during driving.

The handle has an integral closure design, ensuring leak-proof, corrosion-resistant, and rust-resistant, with a 14-inch long flexible air hose. You will get the built-in air bleeder valve that allows quick bleed-off pressure if the tire is over pressurized.

This decreases the likelihood of explosions, crashes, and flats. The cost of the device is affordable, which also attracts zero turn mowers. Also, it comes with the duty leak-proof brass air chuck that avoids air leaking and guarantees accurate reading.

• High accuracy guaranteed
• Easy to use and read
• Inflate tires high-speed and easy
• Sturdy and durable
• It has maximum accuracy
• Instant and accurate
• It reads automatically
• Easy to use

VacLife DC 12V Portable ATJ-1166 Tire Pressure

Those who want the tire pressure for a turn mower that is versatile can go for this product from VacLife.

You can use it in vehicle tires and entertainment or sports equipment, including midsize or compact Sedan, ATV, SUV, bike, air mattress, motorcycles, inflatable boats, or balls. There is the auto-shut-off function that offers you the rest-assured.

Additionally, it comes with LED lighting that helps to support the inflating requirements in the low-light environment.

importantly, it is coupled with an 11.9ft power cord that includes the rear and the front tires. In the same case, it eliminates the pointless hassle of unplugging the device anytime you switch to the other tire.

I really appreciate the multipurpose nozzle because it assists you in deflating very fast and keeps your zero turn mower safer. Three additional nozzles can help to satisfy different needs.

This lets you inflate bike, car, basketball, soccer, zero turn mower, and other inflatable gear with convenience. Even more, it comes with a long cord that can eliminate the need for unplugging it every time you switch.

• Easy to operate
• It has an auto shut off
• It comes with multipurpose nozzles
• The LED light ensures night test
• It has a long cord
• Easy to use
• It is portable
• Inflate very fast
• Works very well

EPAuto Slim Silver Digital Tire Pressure

Suppose you want a tire pressure for zero turn mower model that can improve the vehicle safety and handling, then go for this product from EPAuto.

It ensures good maintenance, which can reduce tire wear and help extend tire life. The mower comes with a lighted nozzle that can ensure visibility in the dimly light area.

Additionally, it has four pressure ranges: 0 to 7 bar, 0 to 150 PSI, 0 to 7 Kg/cm2, and 0 to 700 Kpa. You can press the power button to switch on the mower and choose the range. On the other hand, it has an automatic shut off that turns off if not in use for 30 seconds.

This model comes with a digital display of a 21×10mm LCD, which ensure good light even during the night. Thanks to the 3xLR44 1.5V button cells that can ensure a long working. What is more, it has an operating temperature of 42 °F to 120 °F and a minimum increment of 0.5 PSI.

• It extends tire life
• Improve vehicle safety and handling
• It shut off automatically
• Ensure good visibility even in dimly light
• It has a pressure range
• Easy to use

Low readings of the tire pressure threaten the following troubles

Conclusion

The best tire pressure for a zero lawn mower is an essential device if you want to measure tire pressure. The model is aimed at the timely determination of auto tire pressure.

Likewise, the owner must connect the device to the tire nipple, look at the screen and record the readings. According to the manufacturer, the errors can be minimal, for example, 0.5 bar. There is an LCD screen, which can help you see the data even in the dark.

TiGaAT Digital Heavy-Duty Tire 200 PSI Pressure is the best-selling model. It has a 3x LCD screen that displays clear and large numbers in different units according to your preference.

In the same way, it has a rubber protective pad, which can help it withstand vibration and a drop. This product has attained the above factors because it has an LCD screen that offers a better display even at night. Also, it has a rubber protective pad that resists vibration and a drop.

Posted on Published: December 24, 2021. Last updated: March 6, 2023

Best Tire Pressure for a Zero Turn Mower

As an Amazon Associate we earn from qualifying purchases made on our website. If you make a purchase through links from this website, we may get a small share of the sale from Amazon and other similar affiliate programs.

A zero turn mower is well know for the fact that it can turn on a zero-degree turn radius. As a result, the mower can turn a full circle without missing any patches of grass. There are several different types of zero turn mowers and the right one for you all depends on the size, the incline, and the landscaping of your yard. Whether or not you have a commercial or residential area is also something to consider when shopping for a ZTR.

Believe it or not, your mower’s tire pressure can also have a significant impact on your lawn. If you own a zero turn mower and are curious to know what the best tire pressure for it is, keep reading.

The best tire pressure for a zero turn mower can be anything between 8 and 50 PSI. The front tires on a zero turn mower usually require a higher PSI than the rear tires. The maximum PSI can usually be found on the side of each tire.

Tire Pressure Matters!

After all, the tires are what will ultimately help direct the movement of the mower. The pressure in the tires is important because a tire pressure that is too low can affect steering. This in turn, can cause the mower to wobble and create an uneven cut.

Pay Attention to the Maximum PSI

It’s also important that you don’t overinflate your tires.

This can result in tire failure so be careful when you’re filling them up.

Servicing the Tire Pressure

Before you get started, you’ll want to verify the maximum psi for the specific tire on your lawn mower. Do not assume the max psi is the same for all tires on a ZTR (they are probably different).

Do not ever fill the tire above the maximum pressure threshold! This could lead to your tire exploding which is obviously dangerous.

To test the pressure, you need to carefully remove the cap.

Next, you’ll want to hook up your pressure gauge and test out the pressure. You can get one here for pretty cheap (link to Amazon).

If it’s low…I’d recommend filling the tire up to 2-3 psi less than the maximum.

To fill the tire, you’ll need to use a compressor.

Once you’re done, recheck the pressure with the gauge and then you’re good to go.

Make sure you check the max psi for each tire! Typically on a ZTR, the rear tires are much larger than the front tires. They usually require a lower psi too so don’t just assume all the tires are the same.

Other Issues with Tires to Consider

Aside from making sure that your zero turn mower’s tire pressure is where it needs to be, there are other problems to look out for with your tires that could have a negative effect on your lawn. One of these things is dry rot. Dry rot is the term used to describe tire decay caused by being regularly exposed to harmful substances and conditions.

While minor dry rot can be fixed using a sealant, it can continue to get worse, eventually making your tires unsafe for driving. You can check for dry rot by looking at the tire’s sidewall and checking for cracks.

A worn tread is another issue that may often come up with your tires. When your tires have less than 2/32-inch of tread remaining, they will need to be replaced.

Here are some of my favorite lawn care products

Thanks a lot for making it to the end of this post! I hope you found it useful. Here are some lawn care products that I use and that I think you’ll also find helpful. These are affiliate links, so if you do decide to use any of them, I’ll earn a commission.

In all honesty, these are some of the basic products that I use and recommend to everyone.

Broadcast Spreader

This Scotts Elite dual rotary spreader is not a professional grade model but it’s excellent for homeowners.

I really like the edge guard on it. It’s really easy to switch on and off so it’s great for going around my driveway and flower beds.

If you’re not looking to spend hundreds of dollars, I’d definitely recommend this model. It spreads out a wide path and is great quality for the cost.

Backpack Sprayer

This 4-Gallon sprayer is my absolute favorite. It sprays for a really long time. I’ve had this sprayer for quite a while and I’ve never had the battery run out.

The adjustable pressure switch is a really import feature to me.

You can order a lot of accessories for this model but I’ve never really found much of a need for it.

Head Aerator

Hand aerators are great for small spots if you’ve got construction debris or a spot that constantly dries out.

You can also fill these holes with organic matter that will hold a bit more moisture.

This one by Yard Butler is an absolute bargain. It pulls nice long cores. I also use it for taking soil samples around the yard!

Stop Go 1090 Motorcycle, ATV, Lawn Mower Tire Inflation Kit with (4 Pack) CO2 Cartridges, Hose and Storage Bag

Each of these four threaded steel canisters contains 16 grams of 100% pure high-velocity CO2 gas. In just a few seconds 8-9 lbs. of inflation is discharged into your tire. The re-usable valve adapter has solid brass fittings. ATVs and rider mowers will generally use just one canister to fully inflate the tire. On a full-dress touring motorcycle tire, it will generally take all four canisters to reach 24. 32 lbs. of pressure depending on the size of the tire. This kit is for use on motorcycles, ATVs, Golf Cars, Lawnmowers, and small utility tires.

Shipping

Stop Go offers both fast and free shipping anywhere in the United States. Packages usually arrive within 3. 5 business days!

All products for sale on our website are in-stock and will ship same day if ordered before 1:00 pm CST.

Returns

At stopngo.com we have a very easy 60-day return policy. Email us at contact@stopngo.com and let us know that you want to return your item.

As long your item is 100% new, never used, never installed, and is in the same condition as we sent out to you, we will provide a free prepaid label for you to return your item back to us.

No Hassle, No Stress, just giving customers our best.

Stop Go 4500 Doniphan DrNeosho, MO 64850

What to Do if Your Lawnmower Tires Keep Going Flat?

Machines are bound to develop technical or mechanical problems. And when it comes to your newly acquired Husqvarna, Toro, Honda, or John Deere riding/push mower, you should expect its components to wear and tear after some years. However, when problems like flat tires become frequent, they negatively affect your grass-cutting machine’s general efficiency. It goes that lawnmowers depend on tire pressure for maximum traction and performance. Thus, apart from the fact you will often replace mowing blades, belts, and filters, tires that keep going flat should be a real cause of worry.

So, What to do if your lawnmower tires keep going flat ?

If your lawnmower tires keep going flat it can be due to several reasons:

How to avoid flat tires on lawnmowers:

• Check pressure regularly
• Take care of max pressure
• Replace old worn-out tires with a new one
• Do not park in the open sun
• Cut grass regularly
• Insert tubes inside each tire on your mower
• Buy quality and/or originaltires

For an experienced handyperson or a homesteader, you will agree that fixing a flat tire on a lawnmower is not always easy. Sometimes, the damage is beyond repair, and the only option you have is to buy brand new tires. Thus, in answering the question of what to do if tires on your mower keep going flat, we would say there are many things you can do. First, one must delve into the real causes of flat tires before seeking a long-lasting solution.

We know getting lawnmowers back to a perfect working condition means a lot to homesteaders. over, because getting the best out of these machines is the most important thing for cutting grass, tires should always be in great condition. Dive in to explore the nitty-gritty of frequent flat tires on lawnmowers, especially how to deal with it once and for all.

• 1 What causes flat tires in lawnmowers and how do deal with it?

• 1.1 Rough lawn terrain
• 1.2 Wear and tear
• 1.3 Exposure to heat
• 1.4 Sharp objects cause tire puncture
• 1.5 Leaky valve stem

• 2.1 The problem with overinflating tires

• 3.1 Park the mower on a flat surface
• 3.2 Jack up the mower
• 3.3 Locate the puncture
• 3.4 Start repair
• 3.5 Time to refill the flat tire

• 4.1 Check pressure regularly
• 4.2 Take care of max pressure
• 4.3 Replace old worn-out tires with a new one
• 4.4 Do not park in the open sun
• 4.5 Cut grass regularly
• 4.6 Insert tubes inside each tire on your mower
• 4.7 Buy quality and/or original tires

What causes flat tires in lawnmowers and how do deal with it?

Once in a while, the tires on your mower will go flat. However, it is something that does not always require a quick fix. Quick fixes would only escalate the problem to a point where punctures become frequent. Based on our experience with different types of lawnmowers, when tires go flat often, it signals a problem that could be deeply seated than imagined. It is always that time you dug deeper and unearthed the real cause of flattening tires on your mower. Do they have holes? Is it because of tread wear? Or could it be that tire sidewalls have cracks?

The truth is that some tire problems are hard to determine unless you carry out an extensive diagnosis. It also means that the procedure for fixing flat lawnmower tires varies depending on the cause. But first, take note of the following causes of flat tires:

Sharp objects cause tire puncture

Another known cause of flat tires in lawnmowers is the presence of sharp objects on the lawn. It could be broken glass, a nail, or a screw. The nature of a tire blowout should shed some light on the nature of the object. Most importantly, inspecting the tires could occasion a dreaded find such as broken glass pieces lodged in tire treads. While you can clear lawns before mowing so that they are free from stones, pebbles, and puncture-causing objects, smaller objects are often hard to spot.

Leaky valve stem

Valve stem makes it possible to inflate or deflate tires. You should ensure that mower tires have optimal pressure-not too high or too low to cause a puncture/blowout. The right pressure for lawnmower tires is something we explore next, so keep reading to learn more. Meanwhile, you should note that valve stems also wear and tear or could get damaged. Other causes of damage to the valve stem are corrosion and dirt. Should you discover that the valve stem is causing frequent flat tires, get help from a local service provider/repairer. From our end of the bargain, we would advise that you buy new valve stems before it is too late to make a fix. You can find Lawn Mower Valve Stems here.

What is the right lawnmower tire pressure?

First off, take note that tire pressure should not be too high or too low. Both extremes are always bound to cause problems. You should, therefore, inflate your lawnmower tires to optimal pressure (psi). The big question is whether there is a standard pressure gauge for these machines or varies depending on the model. The good news is that like tires in bikes, airplanes and a car, determining the optimal tire pressure for your lawnmower is as easy as looking at the sidewall. You should spot a labeling ‘Max.Press.XX ‘where xx is the recommended psi. It could be 30, 34, or 40 psi, depending on the type of tires on your mower. For worn-out sidewalls, check the user manual for the optimal psi recommended by your lawnmower manufacturer. You can find tire pressure gauges here.

The problem with overinflating tires

While the psi labeling on tire sidewalls helps you monitor the pressure gauge, the temptation to overinflate is often real. We always think overinflating makes tires strong, sturdy, and handy. But there is a real danger that comes with it. First, it affects the braking threshold, especially in riding lawnmowers. Secondly, overinflating mower tires begets the risk of a blowout. It also speeds up tire wear and tear. With wear and tear, you should expect more problems, such as reduced traction.

Tips on fixing flat lawnmower tires

When lawn mowers tires keep going flat, cutting grass becomes painstakingly difficult. You would rather do it manually than push or ride a punctured mower. But you should not give up just yet. There are a host of things you can do to save troublesome tires. Apart from inspecting them for a puncture, a permanent fix becomes necessary. Based on our experience with these machines, we suggest fixing flat tires by doing the following:

Park the mower on a flat surface

There is a real risk of mowing lawns with flat tires. The rims may bend, and that means you will have a bigger problem to handle. As soon as you notice that a tire is flat, slowly ride/push the machine to a flat work surface and park it.

Jack up the mower

With the mower parked, put a jack under either the front or back frame depending on the flat tire’s location. Raise the machine high enough so that the jacked end allows the flat tire to spin freely. We recommend jacking it up by half-foot for stability and easy access to the wheel. It should also give you enough workspace. Put jack stands on both ends and let the mower rest on them.

Locate the puncture

When locating a puncture on your lawnmower, take note that many things cause flat tires. The next question you should ask is, what made the tires flatten? Well, roll out the hanging wheel slowly while paying close attention to objects lodged into the tire tread. When you spot something fishy, say broken glasses or wire, use a pair of pliers to pull it out. Please make sure no broken pieces remain in the tire as it could worsen the problem. If there is none, rub soapy water on the tire to locate a hole. A hissing sound and bubbles should signal a leak.

Start repair

Using a reamer tool, widen the puncture hole so that it is even. You should insert it in and out of the hole severally. For those who are learning about a reamer tool for the first time, note that it looks like a file (circular) and has a handle. Next, get the tar strip and insert it, but first, remove its protective stripping.

A strip has sticky sides that seal onto the puncture holes. Now, get a threading tool into which you insert a tar strip so that half of it goes through to the other end. You can use rubber cement to coat the strip further. The threading tool should help you insert a tar strip on the hole you made, even using a reamer tool. A third of the strip should stick out. Using a pair of scissors, cut the sticking strips as close to the tire as possible.

You can find Lawn Mower Repair kits here. If your tire is in bad shape it can be wise to install a new one. You can find Lawn Mower tires here.

Time to refill the flat tire

Following the above steps to the letter should leave the patch tightly in place. Now, it is time to test the tire for puncture once again. You can also refill it with pressure while taking care not to exceed the max limit. If the patch does not let out air, roll down the jack and remove it. You are now ready to start mowing your lawn once again. Take note that fixing holes on lawnmower tires follows the same procedure as that of car tires. The only difference is that tires in mowers are narrower and smaller. Should you find the task challenging, we recommend seeking help from a specialist to avoid causing further damage to flat tires.

Pumping your tire with a small air compressor is very convenient. You can find tire air compressors here.

How to avoid flat tires on lawnmowers

Having a flat tire on a lawnmower is one situation you don’t want to experience, especially when busy trimming grass on your backyard lawns. Thus, we suggest that you do the following to retain tire pressure at optimal:

Check pressure regularly

Checking tire pressure is a pivotal maintenance routine. Whether you do it fortnightly or every month, lawnmower tires lose air faster given their smaller size than car tires. If you don’t have a pressure gauge, consider checking into a refill station. Most importantly, especially for homesteaders who have a pressure gauge, a gauge should read both high and low pressures. You can find tire pressure gauges here.

Take care of max pressure

Maximum pressure labeling on tire sidewalls does not mean maximum refill. It could be lower. Max pressure means you should not exceed a set pressure limit lest you risk among other things, a tire burst.

Replace old worn-out tires with a new one

The chances are high that tires on your mower are losing air faster than they should because of wear and tear. You can diagnose tires manually to determine if there is a need for replacement. Take note that wear and tear do not only take place on the treads after many years of use but also the sidewalls. Experts advise against using harsh chemicals when washing your push or riding mower lest the tires wear and tear out faster. You can find Lawn Mower tires here.

Do not park in the open sun

Ever wondered why tires go flat after some weeks, especially when you park a mower under direct sunlight. The reason is pretty simple. Direct heat from the sun causes tires to crack, especially on the sidewalls. Such is a phenomenon that leads to faster wear and tear of tires. You don’t want to budget for spares only a few weeks into buying a brand new lawnmower because of recklessness.

Cut grass regularly

Long thick turf is likely to harbor obstacles that you cannot spot when mowing. Take, for example, sharp stones and broken glass, which would prick tires, causing them to go flat in the process of working. When you mow grass in your homestead regularly, you guard against such unfortunate eventualities that may cause damage to your machine. It would help if you had a clear sighting of everything lying about on the lawn before you can start mowing. Pick up the debris that might puncture tires before you start working.

Insert tubes inside each tire on your mower

Tubeless tires have become popular, but they come with high maintenance costs. Tubes prevent air loss; hence not having them inside tires means you have to be extra careful when mowing the grass. When tubeless tires hit a rut, there is a high risk of puncture. It is also noteworthy that tubeless tires tend to separate from the rim, hence more likely to go flat than the ones with tubes. You can find Lawn Mower tubes here.

Tubes, apart from keeping tires airtight, also prolong their tire lifespan. For those who do not know how to fix tubes into tires, feel free to seek the services of a professional or a lawn mowing service provider near you.

Buy quality and/or original tires

There is a real chance of buying counterfeit tires today. The risk gets more real for someone who has never considered replacing worn-out tires. So, you ask, what’s the catch with tire replacement? Well, we advise that you purchase quality original lawnmower tires from a trusted dealer. There are more than a dozen manufacturers of tires who enjoy a good reputation worldwide. Original tires will not only last long but also last their value without going flat unnecessarily. You can find Lawn Mower tires here.

Maintenance tips for keeping lawnmower tires in great working shape

When using lawnmowers, your safety should come first. While we will not look at dangers associated with flat tires, you should ensure they have optimal pressure at all times. Ensuring the longevity of mower tires, therefore, means you do the following:

• Avoid sharp objects: Do not run over sharp objects such as nails, harpoons, rocks, cacti, porcupines, thorns, glasses, needles, and bolts. You should inspect your lawn for any of these before mowing.
• Store the mower in shade: Construct a cool shed or a garage where you store your lawnmower when not in use. Dry rot on tires happens due to overexposure to direct sunlight. With dry rot, often manifest on the sidewalls, tires cannot contain pressure for a long lime. The risk of a blowout also becomes real.
• Avoid chemicals while washing: When washing mower tires, do not use harsh chemicals. But if you do, rinse off with plenty of clean water.
• Keep tire pressure optimal: Underinflated tires cannot support the weight of a mower hence risk getting damaged. On the other hand, overinflating tires puts them at risk of blowouts, something you don’t want to experience when mowing uphill/downhill.

Final Remarks

Tire bursts and blowouts are things you don’t want to experience when mowing. Apart from halting your mowing, you are also exposed to risks such as accidents/injuries. But when you know what to do to keep tires from going flat or how to fix flat tires, nothing should be alarming.