5 Tips About Large Circular Saw Blade Made To Your Size. Largest circular saw blade

Tips About Large Circular Saw Blade Made To Your Size

Beyond having that great circular saw which enhances your work, the type of blade you use is also of great importance. Depending on the occasion, some blades can add quality finishing to your work, while others can give you less quality. Thus, to have a high-quality cut, you need to know the type of saw blade that best suits your job.

Choosing the right circular saw blade isn’t difficult as long as you understand the basics. Continue reading as we guide you through tips to choose that large circular saw blade that best suits you.

Table of Contents

Five Aspects We Will Consider

There are several variants to consider, such as the diameter, material, number of teeth, blade parts, job to be done, and many more. Each aspect that will discuss holds crucial information you need to choose that saw blade that is just right for you.

Parts Of A Circular Saw Blade

Besides, you must also pay attention to the material you want to cut, as this will determine the type of circular saw blade to use.

One of the important reasons is that the depth at that the blade can cut is synonymous with the diameter of the blade. So also, the thickness of the material to be cut(wood, plastic, ceramic e.t.c.) will determine the blade to use.

Types Of Tooth

To get that large circular saw blade made to your size, you consider the type of teeth the blade has. You also have to consider the angle of attack, of which there are two variants; positive and negative. The angle of attack is negative when the tooth is bent backward, and it is positive when tilted forward.

Analyzing the different types of teeth goes hand-in-hand with the material to be cut to optimize cut quality. Currently, there are several types of teeth for large circular saw blades which can be flat, bevel, or trapezoidal such as;

ATB Alternate Top Bevel Teeth

ATB teeth cut like a knife and are generally used to cut solid wood, plywood, chipboard, and melamine. They cut in such a way to reduce tear-out. Regarding bevel teeth, an increase in the angle will enhance the quality of your cut while reducing durability. As a result of the type of material we use ATB teeth for, it is more of a general-purpose blade.FTG Flat Top Grind Teeth.

These types of teeth, as the name denotes, plow through the wood, cutting the wood fibers parallel. It is used in rip blades.

TCG Triple-Chip Grind Teeth

For the TCG teeth, the edges are beveled, and on the blade, it alternates between bevered teeth and flat-top grind teeth. They are majorly used in situations in which durability is essential. These teeth are more durable than others you will find. They are used on blades meant to cut manufactured materials and melamine boards, as well as used on glue-line rip blades.

FTG Flat Top Grind Teeth

These types of teeth, as the name denotes, plow through the wood, cutting the wood fibers parallel. You use it in rip blades.

Number Of Teeth

As earlier mentioned earlier, the number of teeth of a blade is another aspect you must consider when choosing the right circular saw blade to fit your size.

It is crucial to consider the number of teeth your blade has because the higher the number of teeth, the better the finish. Besides affecting the cut’s finesse, it also changes its speed.

The higher the number of teeth on your blade, the slower the cutting rate of your circular saw. Also, the fewer teeth on your blade, the faster the cutting process of your circular saw. Thus, blades with many teeth are considered plywood blades, with more emphasis on the finish rather than the cutting speed.

Although small-tooth blades are called building blades, they don’t pay as much attention to finesse as speed.

So, if you are a carpenter or looking for a blade that cuts fast while less interested in how your work looks, then go for a blade with little teeth and vice versa.

Diameter

As aforementioned, the diameter of a blade determines the depth at which a circular saw can cut, which is why we consider diameter as another determinant in choosing a suitable circular saw blade.

All blades are toothed metals with holes in the middle, referred to as bores. In most cases, it is always safer to use a saw blade with a larger diameter than the saw, as long as you have a hole adjustment ring for mounting the blade on the saw shaft. The blade mounted on the shaft of the circular saw through this hole.

Also, when choosing the right blade for your large circular saw, make sure the diameter of the blade does not exceed the maximum diameter of a blade allowed to be mounted on your circular saw.

But note that if you choose a blade with a smaller diameter, you will be sacrificing maximum cut depth, as a higher blade diameter means higher cut depth.

The blades’ diameter also affects the circular saw’s RPM(revolutions per minute).

Material Of The Circular Saw

The material used to make a blade must be stronger than the cut material. So when cutting stones, you do not buy a blade for cutting wood.

Some of these materials are;

Diamond Blades

Since diamond is the hardest metal on earth, it is used to make cutting blades. In this, diamonds are placed on the blades’ tips give them the ability to cut through stronger abrasive materials such as; concrete stone, ceramics, asphalt, and so on. They are known as abrasive blades.

Carbide Blades

The name for this hard compound comes from metal. Several substances can add to a carbide compound, including tungsten, a hard metal.

Tungsten carbide blades can use to cut plastic, non-ferrous metal, plywood, softwood, hardwood, and many more, including aluminum and copper.

Note: the saw blade remains an essential tool in cutting because you can use the same large circular saw blade for several jobs, but specific blades are needed to cut certain materials. It is why choosing the larger circular saw blade made to your size is paramount for efficiency.

Conclusion:

Large circular saw blades are modern tools important in everyday worship practice. And at such, it’s vital that you understand the types available, how they operate, and other vital things about them. You already know what a good circular saw blade should look like. However, If you need help picking or need a place where you can have access to a quality circular large blade saw made to your size, don’t hesitate to consult us. We supply a wide range of professional guidance and offer suggestions to help you choose.

Leave a Comment Cancel reply

You must be logged in to post a comment.

Choosing and Using a Circular Saw

A good circular saw should have enough raw power to slice through everything from wet lumber to dense hardwood without bogging down. “When the motor slows, the blade heats up and dulls quickly,” explains Tom Silva, This Old House general contractor. This not only produces a poor cut, it’s dangerous because the blade can climb out of the kerf and push the saw back toward the user.

However, evaluating power from the motor ratings can be misleading. Amps indicate only the amount of electricity a motor draws, not the power it sends to the blade. Horsepower accounts for torque (rotational force), but not necessarily under working conditions.

In the end, the most reliable appraisal may be price. A dependable sidewinder — the more compact design, in which the motor sits alongside the blade — starts at around 100. There are many saws on the market under this price, but they’re not as powerful, nor are they built for a lifetime’s use. Professional-grade sidewinders, which run quieter and cut through dense wood better, cost between 125 and 150. TOH master carpenter Norm Abram prefers this tool, noting that buyers should choose one based on balance and maneuverability. “I’d never buy a saw I didn’t have a chance to hold first,” he says.

On the other hand, a good worm-drive saw, Tom’s choice for framing because of its high torque output (its beefy spiral gear transfers power to the blade more efficiently), will set you back at least 200. Either way, a top-of-the-line saw, if treated with care, should still be cutting well when you’re ready to hand it down.

tips, large, circular, blade

Saw Styles

The motor is in line with the blade, delivering enough torque to carve up wet lumber or saw through concrete, which makes a worm drive ideal for framing or major renovation jobs. With the handle farther back, a user can better resist kickback and steer the 16-pound saw through long rips. As on most full-size worm-drive saws, the blade of this Skil HD77 sits to the motor’s left — in easy view for right-handed users.

The motor sits alongside the blade, making for a lighter (11 pounds or less) saw, which is more maneuverable over a long day than a worm drive. The helical gearing on higher-end sidewinders, such as this Milwaukee 6390-20, beefs up the torque, making these models worthy competition for worm drives.

Small Sidewinder

Weight, balance, and handle size are all key features to consider when choosing a saw that fits you. For a slight-bodied person, a small pro model like this 7.7-pound Makita 5740NB may be more appropriate than a full-size sidewinder.

Battery-driven models have increased in size as their power packs have gained voltage, making them convenient tools out in the field or when the electricity’s not on. This Bosch 1660K sports a 6 ½-inch blade and a 24-volt battery — the largest in its class. However, cordless models still have limited run times and generate less torque than corded saws.

For finish work or paneling, Norm Abram prefers a small trim saw; blades range from 3½ to 412 inches. This Porter-Cable 314, with a 4½-inch blade, is the one worm drive on the market — all others are sidewinders.

Features

Ease of Adjustment

Large, smooth-cornered lever locks and full-round knobs that can be tightened down with the whole hand, like this one on the DeWALT 364, make it faster and easier to change the depth of cut and bevel settings than small, hard-to-grasp levers and wing nuts.

Shoe Styles

“No matter what you do, you will drop your saw,” warns Tom Silva. Cast-metal shoes with raised reinforcing ribs on the top surface, as seen here on a Porter-Cable 347, won’t bend like flat aluminum shoes if the saw hits the ground. On the other hand, a cast metal shoe adds weight to a saw.

Norm’s Circular Saw Basics

Safety First

Circular saws can be dangerous. Always wear safety glasses and follow the safety instructions printed in your saw’s owner’s manual

Setting Blade Depth

Set the blade so that its bottommost tooth is 1/8 to ¼ inch below the work piece. Always make sure the power source is unplugged before making any adjustments to the saw.

Support the material on a bench or two strong sawhorses, overhanging enough so that the cut piece will fall. Never prop up this off-cut, or the material will buckle and bind the blade, causing a dangerous kickback.

Cross-Cutting

For an accurate cut, mark the side of the material that will become waste, then line up the blade to just leave the pencil line on the keep side. To make the cut, support the front of the saw shoe on the work piece, but keep the blade about an inch from the material. Then start the saw, letting it come up to full speed before pushing it steadily through the wood.

TIP: For 90-degree cross-cuts, use a speed square to guide the saw (below).

Place large sheets of plywood on 2x4s laid across sawhorses and positioned to support both sides of the cut. Clamp a strip of plywood or other straight material to the work piece at the right distance to guide the saw shoe while cutting the line. Walk alongside the plywood as you cut, holding the cord to make sure it doesn’t get snagged.

TIP: For narrow rips, keep the saw straight by holding the shoe with your free hand and bracing your forefinger on the wood’s edge. You can also use a pair of locking pliers (below) or a rip-fence accessory.

of Norm’s Tips

Finish Cutting

As a circular saw blade cuts up through wood, the fibers on top splinter off, a condition known as tear-out (usually worse on cross-cutting). If appearances are important, put the good side down when cutting. If you must cut the board face-up or if both sides will show, score the cut line with a utility knife before cutting.

TIP: When cutting a finished piece, such as a painted door, duct-tape the bottom of the saw shoe so it can’t scratch the finish.

Plunge Cutting

A saw blade sinking through the face of a board can “walk” back across the surface, so make sure that no part of your body or the cord is in line with blade. Release the lever for the depth setting and drop the shoe below the blade. Then tighten the lever slightly to keep the blade from dropping, but don’t lock it all the way. Bring the saw up to full speed, lift the guard, and slowly push the body of the saw down to start the cut.

starting the cut in the middle of a board

TIP: Make sure to start back far enough so that you only push the saw forward; never drag a spinning saw back.

Ripping Wider Lumber

If a board is too wide for the saw shoe to hang over the edge during a rip cut, hold a narrow scrap of wood between thumb and forefinger, bracing your finger along the edge of the board, and butt the saw shoe against the edge of the wood scrap as you push both along the board.

Gang Cutting

When cutting more than one piece of plywood to the same size, stack them on top of each other (or side by side in the case of dimensional lumber), clamp them together firmly, and cut the lot in one pass to save time and ensure consistency.

Blade guards have a tendency to jam on steep bevel cuts, so carefully nudge the guard lever with one finger to ease it over the edge. Once the cut has been started, let the lever go. Never remove the guard or rig it so that it stays up permanently.

Circular saw blades

Toothed,smooth and diamond blades available upon request. Available Ø: 200, 250, 275, 300, 350, 400, 520 and 650 mm. Diamond blades are ideal for cutting steel spiral hoses type SAE 100R4, that.

circular saw blade TM C

C cutting blade substantially reduces the power demand during cutting. Coated with fine, very hard particles it produces a precise straight cut leading to a considerable reduction in contaminant and smoke. The hardness.

circular saw blade

Kaindl has manufactured the 13275 Multi Saw Set that can used for angle grinders. The set consists of a 120 x 25.4 mm multi saw blade, and a guard for an angle grinder in a case. These.

circular saw blade DEIMOS

Circular saw blade diameter: 225 mm. 660 mmBore: 32 mm. 140 mmBlade thickness: 1.2 mm. 8 mm

Cermet tipped circular saw blade for metal cutting. Its Cermet tips ensure durability and performance of the blade under extreme cutting conditions. APPLICATION: Cutting.

circular saw blade DEIMOS SP

Circular saw blade diameter: 225 mm. 660 mmBore: 32 mm. 140 mmBlade thickness: 1.2 mm. 8 mm

Cermet tipped circular saw blade for metal cutting. Its Cermet tips ensure durability and performance of the blade under extreme cutting conditions. APPLICATION: Cutting.

circular saw blade NYX

Circular saw blade diameter: 225 mm. 660 mmBore: 32 mm. 140 mmBlade thickness: 1.2 mm. 8 mm

TCT coated circular saw blade for metal cutting. According to a particular application can be developed a special geometry of the toothing. APPLICATION: Cutting big section of solid.

circular saw blade SCALLOPED BLADE / SLOTTED BLADE

Circular saw blade diameter: 254, 300, 520 mm

Plain Cutting Blade: recommended to cut braided hoses Available diameters: 254mm- 300 mm- 520 mm Serrated Cutting Blade: recommended to cut coated hoses Available diameters: 520 mm Scalloped Cutting.

circular saw blade CMS series

Circular saw blades are cutting tools used on circular saws. These can perform various operations like edging, splitting or cutting on different angles. The.

circular saw blade MON0 series

Circular saw blade diameter: 250 mm. 800 mm

The cutting of wood with circular saw blades is performed on fixed table/mobile table saws or saws with mechanical feed. These blades.

high-speed steel saw blade Gleason, Heidenreich, Harbeck

Type: GLEASON HEIDENREICH UND HARBECK DESCRIPTION TYPE FEATUREN° PCS.CODEMATERIAL Spare blades for reciprocating motion gear cutters Gleason, Minganti, Heidenreich und Harbeck For roughing or finishing1 1PHS.

circular saw blade

Our goal is to supply our customers with the highest quality of Industrial Tools that are of optimum quality and exhibit inexplicable performance in respective applications. Our products are built for ultimate performance and we assure.

Why big saw blade hole size?

circular saw blade

pulverizing equipment and blades. Unique Quality Control with each and every disc/Segment. Supply of new discs/Segments in any material (Tool Steel, Powder Metal, with or without coating) GRINDING SERVICE FOR YOUR.

circular saw blade 2018004

Circular saw blade diameter: 180 mm. 220 mm

Full program of circular thin kerf saw blades for manufacturing of precise dividing cuts in trimmed solid wood on splitting machines and molders. Saw blades.

circular saw blade SILERGIE I

Circular saw blade diameter: 125 mmBlade width: 13 cmBlade length: 13 cm

thick boards, timbers, soft and hard woods, chipboards, rough boards or one-face plated boards, insulating materials “Carbide blade providing a Rapid longitudinal and transversal cuts, in the workshop and outside Materials Thick.

circular saw blade 94.1 FZ – MASSIVE plus series

Circular saw blade diameter: 300, 320, 350 mmBlade thickness: 3.5 mm

Extra- strong rip saw blades for longitudinal cutting of all types of wood, dry and wet, with a standard quality of the cutting edge. They are designed for extreme cutting conditions thanks to the.

circular saw blade

Circular saw blade diameter: 390 mm. 570 mmBlade thickness: 2.2 mm. 5.3 mm

Multi-rip Circular Saw Blade Characteristic: designed for Linck machines in automated lines for primarily wood processing

circular saw blade 33.1 FZ series

Circular saw blade diameter: 600, 700, 800 mmBlade thickness: 3.5, 4.5 mm

Characteristic: longitudinal cuts of massive wood dimensions machine feed

circular saw blade TCB series

For each application AMADA offers the appropriate tool. Like the machines, the saw blades are permanently improved and advanced. By using AMADA tools on AMADA machines always a perfect cutting result.

circular saw blade EXTREME BETON SILENCIO

Circular saw blade diameter: 230 mm. 500 mmBlade thickness: 3.1, 3.2, 2.8 mm

cut-off saws. A noise dampening layer is sandwiched between two sheets of steel which absorbs the cutting vibrations and sound of the product when in use Patented ‘off-set gullets’ prevent whistling air flow around.

circular saw blade 066412 series

Circular saw blade diameter: 115 mm. 230 mmBlade thickness: 1 mm. 1.9 mm

Especially for thin-walled pipes and profiles, thin metal sheets, bodywork panels etc. Service life (points system): 3 of 4 points Cutting ability (point system): 4 of 4 points Handling/user-friendliness (point system): 3.

circular saw blade PREMIUM HSL

HSL Hand saw blade Materials able to be machined: usage on reinforced or normal concrete with wall thicknesses of up to 15 cm. Details: application in system with fuel operated, electric or hydraulic.

circular saw blade WK 100 series

Circular saw blade diameter: 180 mm. 500 mmBlade width: 1 mm. 8 mmBlade thickness: 0.8 mm. 6 mm

Lamellae cuts Premium. middle cut Application: For cutting strips and slats along grain on horizontal and vertical spindles. Machine: Moulders with/without forced guidance of workpieces. Application on single, double, horizontal.

circular saw blade 14103

Circular saw blade diameter: 14 in

Metal cutting blade Specifications Diameter 14 in Teeth 72

circular saw blade HardiPlank /h3>

surface finish. Woodworking Blade Re-sharpening Service re-sharpens blades to original factory specifications to extend the overall life of the blade. Woodworking Blade.

circular saw blade FSC.00122

Circular saw blade diameter: 200 mm. 370 mmBore: 32, 40 mmBlade thickness: 2, 2.5, 3 mm

METAL SLITTING SAW FOR CUTTING STEEL Hardness 63/64 HRC. Steam tempered. Saws delivered with standard pinholes. METAL, STEEL, FERROUS METALS

circular saw blade Clear Cut

Circular saw blade diameter: 300 mm. 600 mmBlade width: 3 mm. 6 mm

Cut Premium Diamond Metal Bond Silent Centre Blades High quality, fast cutting laser welded segmented diamond metal bond saw blades producing excellent results. These diamond metal bond.

circular saw blade max. ø 350 mm | HSS-DM05 series

Circular saw blade diameter: 250, 275, 315, 350 mm

Scotchman offers a complete selection of cold saw blades in stock for immediate delivery. Our fast, high-quality saw blade sharpening service will grind blades.

circular saw blade 503EHSSTF

Circular saw blade diameter: 50 mm

Ø 50 mm, 6-edges HSS steel Teflon coated. Suitable for adhesive or glued materials.

circular saw blade ALC

Circular saw blade diameter: 160 mm. 550 mmBlade thickness: 2.8, 3.2, 3.5, 4, 4.6 mm

Tct circular saw blades for tubes, custom-made profiles and solid aluminium cutting. Useful on manual and automatic sawing machines and on working centres.

circular saw blade DRYTECH /h3>

Circular saw blade diameter: 137 mm. 355 mmMaximum speed: 1,800 rpm

Our carbide and cermet-tipped saw blades are ideally suited for all (hand-held) circular and miter saws as well as high-speed stationary, semi and fully automatic saws. They.

reach your clients in one place, all year round

Your suggestions for improvement:

Filters: find the right products faster. Terminology: use the most common industry terms. Brands: a wider selection. Products: to improve the relevance of the collection. Other

Receive updates on this section every two weeks.

Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.

With DirectIndustry you can: Find the product, subcontractor or service provider you need | Find a nearby distributor or reseller| Contact the manufacturer to get a quote or a price | Examine product characteristics and technical specifications for major brands | View PDF catalogues and other online documentation

are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

English and Metric Dimensioned Blades for Production Cutting

NIABRAZE electroplating process bonds a highly concentrated mono-layer of diamond to the base steel circular blade using a nickel matrix. Diamond encapsulation is approximately 50% to ensure proper adherence while still have the other 50% of the crystal exposed to cutting. This creates an efficient and aggressive cut and long blade life.

Good Tips With Table Saws

Contact us now to order your blade! Email us or call at 716.447.1082.

Along with various grit sizes we can make your circular blades with various edge configurations. Blades can be either continuous, slotted, or segmented and have anywhere from a square edge to full radius. We have inventoried circular blades of common used blades but more importantly will custom manufacturer blades from 1” up to 46” in diameter.

English Circular Saw Sizes

Diameter Continuous Slotted Bore Grit Size Thickness/Guage Wrap In-Stock
1.5″ X 1/4″ 40/50 Grit 0.035″ 1/8″ X
2″ X X 1/4″ 40/50 Grit 0.050″ 1/8″ X
2.5″ X X 1/4″ 40/50 Grit 0.050″ 1/8″ X
3″ X X 1/4″ 40/50 Grit 0.050″ 1/8″ X
4″ X X 3/4″ 40/50 Grit 0.050″ 1/8″ X
5″ X X 3/4″ 40/50 Grit 0.050″ 1/8″ X
6″ X X 5/8″ 40/50 Grit 0.065″ 1/8″ X
7″ X X 5/8″ 40/50 Grit 0.083″ 1/8″ X
8″ X X 5/8″ 40/50 Grit 0.083″ 1/8″ X
9″ X X 5/8″ 40/50 Grit 0.083″ 1/8″ X
10″ X X 5/8″ 40/50 Grit 0.083″ 1/8″ X
12″ X X 1″ 40/50 Grit 0.095 1/8″ X
12″ X X 1″ 40/50 Grit 0.120″ 1/8″
14″ X X 1″ 40/50 Grit 0.095″ 1/8″
14″ X X 1″ 40/50 Grit 0.120″ 1/8″
16″ X X 1″ 40/50 Grit 0.120″ 1/8″
18″ X X 1″ 40/50 Grit 0.120″ 1/8″
20″ X X 1″ 40/50 Grit 0.120″ 1/8″
22″ X X 1″ 40/50 Grit 0.134″ 1/8″
24″ X X 1″ 40/50 Grit 0.134″ 1/8″
26″ X 1″ 40/50 Grit 0.148″ 1/8″

In-Stock items usually ship within 1-3 business days. Other listed products are part of our standard offering and will ship in 7-10 business days.

Custom diameters are available up to 48″ as well as custom bore sizes and custom grit sizes. If you are interested in a diamond circular saw blade that is not in our standard product list, then click here to request a quote.

Metric Circular Saw Sizes

Diameter Continuous Slotted Bore Grit Size Thickness/Guage Wrap In-Stock
38 mm X 6.4 mm 40/50 Grit 0.9 mm 3 mm X
50 mm X X 6.4 mm 40/50 Grit 1.3 mm 3 mm X
64 mm X X 6.4 mm 40/50 Grit 1.3 mm 3 mm X
76 mm X X 6.4 mm 40/50 Grit 1.3 mm 3 mm X
110 mm X X 19 mm 40/50 Grit 1.3 mm 3 mm X
125 mm X X 19 mm 40/50 Grit 1.3 mm 3 mm X
150 mm X X 16 mm 40/50 Grit 2 mm 3 mm X
180 mm X X 16 mm 40/50 Grit 2.2 mm 3 mm X
200 mm X X 16 mm 40/50 Grit 2.2 mm 3 mm X
230 mm X X 16 mm 40/50 Grit 2.2 mm 3 mm X
250 mm X X 16 mm 40/50 Grit 2.2 mm 3 mm X
305 mm X X 25 mm 40/50 Grit 2.4 mm 3 mm X
305 mm X X 25 mm 40/50 Grit 3 mm 3 mm
355 mm X X 25 mm 40/50 Grit 2.4 mm 3 mm
355 mm X X 25 mm 40/50 Grit 3 mm 3 mm
405 mm X X 25 mm 40/50 Grit 3 mm 3 mm
455 mm X X 25 mm 40/50 Grit 3 mm 3 mm
500 mm X X 25 mm 40/50 Grit 3 mm 3 mm
560 mm X X 25 mm 40/50 Grit 3.4 mm 3 mm
610 mm X X 25 mm 40/50 Grit 3.4 mm 3 mm
660 mm X 25 mm 40/50 Grit 3.8 mm 3 mm

In-Stock items usually ship within 1-3 business days. Other listed products are part of our standard offering and will ship in 7-10 business days.

Custom diameters are available up to 48″ as well as custom bore sizes and custom grit sizes. If you are interested in a diamond circular saw blade that is not in our standard product list, then click here to request a quote.

English and Metric Dimensioned Blades for Production Cutting

NIABRAZE electroplating process bonds a highly concentrated mono-layer of diamond to the base steel circular blade using a nickel matrix. Diamond encapsulation is approximately 50% to ensure proper adherence while still have the other 50% of the crystal exposed to cutting. This creates an efficient and aggressive cut and long blade life.

Contact us now to order your blade! Email us or call at 716.447.1082.

Along with various grit sizes we can make your circular blades with various edge configurations. Blades can be either continuous, slotted, or segmented and have anywhere from a square edge to full radius. We have inventoried circular blades of common used blades but more importantly will custom manufacturer blades from 1” up to 46” in diameter.

English Circular Saw Sizes

Diameter Continuous Slotted Bore Grit Size Thickness/Guage Wrap In-Stock
1.5″ X 1/4″ 40/50 Grit 0.035″ 1/8″ X
2″ X X 1/4″ 40/50 Grit 0.050″ 1/8″ X
2.5″ X X 1/4″ 40/50 Grit 0.050″ 1/8″ X
3″ X X 1/4″ 40/50 Grit 0.050″ 1/8″ X
4″ X X 3/4″ 40/50 Grit 0.050″ 1/8″ X
5″ X X 3/4″ 40/50 Grit 0.050″ 1/8″ X
6″ X X 5/8″ 40/50 Grit 0.065″ 1/8″ X
7″ X X 5/8″ 40/50 Grit 0.083″ 1/8″ X
8″ X X 5/8″ 40/50 Grit 0.083″ 1/8″ X
9″ X X 5/8″ 40/50 Grit 0.083″ 1/8″ X
10″ X X 5/8″ 40/50 Grit 0.083″ 1/8″ X
12″ X X 1″ 40/50 Grit 0.095 1/8″ X
12″ X X 1″ 40/50 Grit 0.120″ 1/8″
14″ X X 1″ 40/50 Grit 0.095″ 1/8″
14″ X X 1″ 40/50 Grit 0.120″ 1/8″
16″ X X 1″ 40/50 Grit 0.120″ 1/8″
18″ X X 1″ 40/50 Grit 0.120″ 1/8″
20″ X X 1″ 40/50 Grit 0.120″ 1/8″
22″ X X 1″ 40/50 Grit 0.134″ 1/8″
24″ X X 1″ 40/50 Grit 0.134″ 1/8″
26″ X 1″ 40/50 Grit 0.148″ 1/8″
tips, large, circular, blade

In-Stock items usually ship within 1-3 business days. Other listed products are part of our standard offering and will ship in 7-10 business days.

Custom diameters are available up to 48″ as well as custom bore sizes and custom grit sizes. If you are interested in a diamond circular saw blade that is not in our standard product list, then click here to request a quote.

Metric Circular Saw Sizes

Diameter Continuous Slotted Bore Grit Size Thickness/Guage Wrap In-Stock
38 mm X 6.4 mm 40/50 Grit 0.9 mm 3 mm X
50 mm X X 6.4 mm 40/50 Grit 1.3 mm 3 mm X
64 mm X X 6.4 mm 40/50 Grit 1.3 mm 3 mm X
76 mm X X 6.4 mm 40/50 Grit 1.3 mm 3 mm X
110 mm X X 19 mm 40/50 Grit 1.3 mm 3 mm X
125 mm X X 19 mm 40/50 Grit 1.3 mm 3 mm X
150 mm X X 16 mm 40/50 Grit 2 mm 3 mm X
180 mm X X 16 mm 40/50 Grit 2.2 mm 3 mm X
200 mm X X 16 mm 40/50 Grit 2.2 mm 3 mm X
230 mm X X 16 mm 40/50 Grit 2.2 mm 3 mm X
250 mm X X 16 mm 40/50 Grit 2.2 mm 3 mm X
305 mm X X 25 mm 40/50 Grit 2.4 mm 3 mm X
305 mm X X 25 mm 40/50 Grit 3 mm 3 mm
355 mm X X 25 mm 40/50 Grit 2.4 mm 3 mm
355 mm X X 25 mm 40/50 Grit 3 mm 3 mm
405 mm X X 25 mm 40/50 Grit 3 mm 3 mm
455 mm X X 25 mm 40/50 Grit 3 mm 3 mm
500 mm X X 25 mm 40/50 Grit 3 mm 3 mm
560 mm X X 25 mm 40/50 Grit 3.4 mm 3 mm
610 mm X X 25 mm 40/50 Grit 3.4 mm 3 mm
660 mm X 25 mm 40/50 Grit 3.8 mm 3 mm

In-Stock items usually ship within 1-3 business days. Other listed products are part of our standard offering and will ship in 7-10 business days.

Custom diameters are available up to 48″ as well as custom bore sizes and custom grit sizes. If you are interested in a diamond circular saw blade that is not in our standard product list, then click here to request a quote.

| Denial of responsibility | Contacts |RSS | DE | EN | CZ