7 Essential Circular Saw Blades for Your Home Workshop. Masonry circular saw blade

Essential Circular Saw Blades for Your Home Workshop

DIY tasks at home are interesting, from wood cutting to furniture modifications and tiles cutting. Having the skills to do these right is one thing; acquiring the right tools to carry these out is another thing. Circular saw blades are essential tools to have as a regular DIYer. Since they are different types, they can be cut through different materials. These materials include home furniture, roofing, and decking.

They are hardwood, softwood, concrete, plywood, Plexiglas, and more.

You can’t use a single blade to handle tasks involving all these materials. You need at least five circular saw blades that can help you through tasks involving different materials.

So what are the essential five types of circular saw blades you should have?

Seven Essential Types of Circular Saw Blades

As you read earlier, your choice of circular saw blades at home should depend on what you are always working on. Or what you’re most skilled at.

You can have as many circulars saw blades as you desire if money is not the problem. If you are on a budget, this article is for you. It will streamline down the best circular saw blades you can have.

Framing Circular Saw Blade:

This is the first choice as it is a utility blade. It serves multiple purposes and is a must-have in your home workshop. With ease, you can use the blade for at least 70% of your work with a circular saw.

It is best put to use when cutting rough framing lumber. It can also handle plywood and sheathing materials relatively easily. The framing circular saw blades are closely similar to ripping cut blades.

They have a relatively low number of teeth, usually 24, which makes the cuts fast and aggressive. It is the blade to use when you prefer speed and volume to precision.

Due to its cutting speed, it has a higher hook angle and a lower kerf number. It allows you to cut through softwood easily. It also comes in different sizes. The sizes are dependent on the type of saw you are using.

Precision Finishing Circular Saw Blade:

You will need this blade when you need a circular saw blade in your home workshop to cut hardwood veneer plywood or plastic laminate. You cannot use the frame blade. It is because the precision finishing has more teeth.

It also has a less aggressive tooth angle. It leaves a cleaner cut on the material you are cutting. That is the essence of having this saw blade in your home workshop.

It gives you the ability to have a clean and precise cut. It is usually made with a carbide tip, which confers it with precision. It has about 80 teeth and is suitable for cutting various kinds of wood.

However, it does not cut fast like the framing circular saw blade. It also has a lower hook angle than it. You can also attach it to various saws.

8 Tooth Circular Saw Blade:

This is a perfect circular saw blade when you have a stack of boards to rip. It is because, apart from being able to rip it, it speeds up the job. Ripping means you are cutting with a grain of wood.

The blade is ideal for this particular task because its fewer teeth are angled to rip effectively. The blade has an alternate bevel face tooth grind that gives it additional precision.

It also features a thin kerf, which enables it to make clean cuts and minimizes the strain on the saw.

It has a super-thin kerf, which enables the saw to work less, and an aggressive hook angle on the teeth, which makes it cut with speed. In application, it can cut through various wood and also non-ferrous metals like copper, bronze, etc.

4-Tooth Circular Saws:

This is your best option if you want an upgrade to the 18 Tooth circular saw blade. Due to its thin kerf, it has great versatility and is highly durable. You can attach it to radial arm saws and table saws.

It is the typical choice for tasks that involve ripping soft and hardwoods. Most ideal for materials ¾ to 2 ¾ inches thick.

The good upside to this circular saw blade is that you can sharpen it numerous times to prolong its lifespan due to its large tooth. The gorge between those teeth is also big, allowing it to easily remove chips.

All the features of this blade enable you to enjoy the maximum performance when you use it for the appropriate materials.

Diamond Masonry Circular Saws Blade:

Do you want a circular saw blade in your workshop that can cut concrete, brick, stone, or tile? Then you need a saw like a diamond circular saw blade in your home workshop.

The blade is made out of steel with synthetic diamonds embedded in it. It can cut through various masonry materials. It is what makes it perfectly more than an abrasive wheel.

The Diamond circular saw blades have three major types; continuous rim, turbo rim, and segmented.

The continuous rim blade has no teeth. It is the best use to cut tiles. The turbo rim blade does not have teeth but has more raw cutting power than the continuous rim because it is serrated.

It can cut through bricks and concrete. The segmented type is, however, rimmed with diamond edges. A small gorge separates the edges. It differentiates the segmented type from the remaining two.

The gullet aids the segmented blade in delivering much cutting power but with lesser accuracy and surface finishing.

Some diamond masonry circular saw blades are best suited for wet cutting, while some are for dry cutting.

Ferrous Metal Cutting Circular Saws :

A circular saw can handle metal cutting too. The ideal one to buy is the ferrous metal cutting circular saw blade. The ferrous blade has many teeth sloped at a shallow angle for efficient metal cutting and a fine finish.

It has a thin kerf which enables you to achieve a smooth finish with minimal waste.

The low hook angle also aids in the improvement of the surface quality of the cuts. The more teeth per inch of the metal cutting circular saw blade allows it to cut harder, denser materials.

It is the best blade to cut metal in the fastest possible way, and it is more of a reason why you must have it in your home workshop.

Compact Circular Saw:

If you have a good circular saw blade, there is no limit to the number of materials you can cut. The compact circular saw blade makes a clean cut with just any material. With 60 teeth, it guarantees quality cutting results when working on thin sheet metals like aluminum.

Due to its versatility, you can cut other materials like plastic and wood. Equipped with a speed of about 10000 revolutions per minute, you can achieve the best cutting results.

This list shows all the important types of circular saw blades you must have in your home workshop. It is to carry out different types of tasks.

The difference between all blades is the number of teeth, teeth design, and the material they are made of. You can buy more saw blades if your budget is not a concern, but this list provides you with the essential ones as a starter considering the budget.

Conclusion

Circular saw blades are numerous, each circular saw blade works on a wide range of materials, but not all are interchangeable. So here is the basis on which we settle on these essential blades. We are always ready to give you the right tools.

As a circular saw blades supplier, we offer quality products, products guide, and friendly and helpful customer service.At https://www.nccuttingtools.com, we strive to be the highest quality and most affordable supplier of essential circular saw blades.

Leave a Comment Cancel reply

You must be logged in to post a comment.

Can You Cut Asphalt With a Masonry Blade

Masonry blades are designed to cut through hard materials like brick, stone, and concrete. So, can you use a masonry blade to cut asphalt? The answer is yes, but it’s not the ideal tool for the job.

Asphalt is a softer material than concrete, so it will wear down a masonry blade more quickly. And because asphalt is black and sticky, it can gum up the blade, making it difficult to cut cleanly. If you need to cut asphalt, it’s better to use a diamond blade designed specifically for cutting asphalt.

• Turn on your power saw and allow the blade to reach full speed
• Position the blade on the asphalt where you want to make your cut
• Apply pressure to the saw and guide it along the line you want to cut
• Allow the blade to do its work and cut through the asphalt
• When you’ve finished cutting, turn off the power saw and remove the blade from the asphalt

Can You Use a Concrete Blade for Asphalt?

No, you cannot use a concrete blade for asphalt. Asphalt is a much softer material than concrete, so using a concrete blade on asphalt would just result in the blade chipping away at the asphalt without actually cutting it. You would need to use an asphalt-specific blade in order to make clean cuts in asphalt.

What Blade Do I Use to Cut Asphalt?

When it comes to cutting asphalt, there are a few different blade options that you can choose from. Here is a look at some of the most popular choices:

Diamond Blades: When it comes to cutting asphalt, diamond blades are often the best option. They are specifically designed to cut through hard materials like concrete and asphalt. Diamond blades come in a variety of sizes and can be used with both hand-held saws and walk-behind saws.

Carbide-Tipped Blades: Carbide-tipped blades are also good for cutting asphalt. These blades are similar to diamond blades, but they have a carbide tip instead of diamonds. Carbide is a very hard material that can withstand lots of wear and tear. Carbide-tipped blades will last longer than regular steel or alloy blades.

Abrasive Wheels: Abrasive wheels are another option for cutting asphalt. These wheels are made from abrasive materials like aluminum oxide or silicon carbide. Abrasive wheels can be used with both hand-held and walk-behind saws. However, they tend to wear down quickly, so they may not be the best choice for large projects.

Masonry Blade: Masonry blades are designed for cutting brick, stone, and other masonry materials; however, you can cut asphalt with a masonry blade.

What’s the Difference Between Asphalt Blade And Concrete Blade?

There are a few key differences between asphalt blades and concrete blades. The first is the thickness of the blade. Asphalt blades are thinner than concrete blades, which allows them to cut through asphalt more easily.

Concrete is a much harder material, so concrete blades need to be thicker in order to make clean cuts. Another difference is the tooth count. Asphalt blades typically have fewer teeth than concrete blades.

This is because asphalt is a softer material, so it doesn’t require as many teeth to make a clean cut. Concrete is much harder, so it needs more teeth to get through it without leaving behind jagged edges. Finally, the two types of blades also differ in terms of their durability.

Asphalt blades are not as durable as concrete blades because they’re thinner and made of softer materials. However, they don’t need to be replaced as often because they’re not used on as hard of materials. Concrete blocks wear down quickly, so concrete saws need new blades more frequently.

What Can a Masonry Blade Cut?

Masonry blades are designed to cut through a variety of materials, including stone, brick, cinder block, and concrete. With the right blade, you can make clean cuts in these materials without having to worry about the blade breaking or becoming dull. Masonry blades come in a variety of sizes and can be used with a variety of power tools, making them versatile tools for any home improvement project.

DIY – cutting Asphalt with a circular saw – walkway/driveway project Part 1

Hi, I’m john, I, ve spent my time helping people to successfully do their DIY projects.I’m a professional saw expert for over 10 years. I’m working with every type of saw and always try to find out which is best for my project. See more report this ad

Circular Saw Blade Direction and Rotation

Most of us have been there at some point…staring at a blade in one hand and a saw in the other wondering what the correct circular saw blade direction is.

The first time I ran into it, I was a little less supervised than I should have been and put the blade on backward. I actually completed a cut, wondering why it cut so slowly before my mistake was corrected. Getting the circular saw blade teeth going the correct direction is what’s at the heart of the matter.

Pro Tips and Tricks: Lacking a proper cement board blade, some Pros intentionally put a framing blade on backward to cut cement board (Hardie Board).

Circular Saw Blade Rotation and Teeth Direction

The saw’s motor runs the blade rotation in a way that the circular saw teeth direction points up as it enters the wood you’re cutting. It’s intentional to create the most stable, accurate, and safe cutting.

As the blade teeth hit the material, they rip from the bottom through the top. That rotation direction pulls sawdust and chips up into the guard where they can eject through a dust port. It’s the opposite of a table saw, where the teeth enter the cut from the top.

Correct Circular Saw Blade Direction

Getting every saw’s blade direction correct isn’t as simple as just slapping the label side out and cutting. Differences in blade orientation (which side of the saw the blade is on) change which side of the blade you see.

If you keep in mind that the blade rotation keeps the teeth direction cutting upward, everything else from here is just icing on the cake. However, saw and blade manufacturers make it a little easier for you.

When you look at the saw’s blade cover there’s an arrow to let you know which direction the motor turns. On the blade, there’s usually a directional arrow as well. When you’re installing your circular saw blade, it’s just a matter of making sure those two arrows match each other.

For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out. It’s not a hard, fast rule, though. You should always double-check.

In our experience, it’s usually blade-left saws where people get mixed up because they look better with the nice-looking side of the blade visible. But regardless of how it looks, it’s all about making sure those teeth cut from the bottom up.

So there you have it—keep those circular saw blade teeth pointing up. Ready for more circular saw tips? Check out this article!

Kenny Koehler

On the clock, Kenny dives deep to discover the practical limits and comparative differences for all kinds of tools. Off the clock, his faith and love for his family are his top priorities, and you’ll typically find him in the kitchen, on his bike (he’s an Ironman), or taking folks out for a day of fishing on Tampa Bay.

Circular Saw Blades

What types of circular saw blades should I buy? Which blade for metal and which one for plywood?

Let me help you with the right answer:

A circular saw is an incredibly useful tool and you will find one in almost every workshop out there. However, like many power tools, a circular saw is only as good as the parts that go into it. In this case, I am referring to the blades that you use on your circular saw.

Choosing the right blade for your circular saw is crucial if you want your circular saw to operate at peak efficiency. But, what is the best blade for each job? That is where I come in. I will give you all the information that you need to make an informed purchase when it comes to circular saw blades. I will tell you about the different kinds of circular saw blades and what kind of blade is best for each job.

Types of circular saw blades

Different types of circular blades are available according to their intended purpose. Standard blades are used in carpentry work, while abrasive blades are for metal cutting and diamond blades for masonry work.

You will also find blades with different thicknesses and number of teeth which I explain in detail later. For now, understand that a fine blade will have a large number of small-sized teeth. Conversely, a rough blade will have less number of larger sized teeth that enable it to cut through the material much faster.

Blade Selection Guide

In case you are in a hurry, here is a quick selection table for reference.

Standard circular saw blades

As you have probably figured out from the name, standard blades are the blades that you will use for most jobs. They are great at cutting wood and come in several sub-varieties for different kinds of woodcutting jobs. Some of the different kinds of standard blades that you will see include:

• Rip-cut blades: These kinds of blades have a low number of teeth, some have as low as 16 teeth, while others have closer to 40 teeth. The lower number of teeth allows for aggressive cutting and enables you to make larger cuts.
• Framing Blades: Closely related to rip-cut blades are things called “framing blades.” These blades also have a very low number of teeth, usually 24 and are intended to make cuts aggressively and quickly. Both rip-cut blades and framing blades are ideal for situations where speed and volume are more important than precision.
• Crosscut blades. These kinds of blades have a higher number of teeth. Very often you will see these kinds of blades having teeth numbering in the 60 to 80 range. The higher number of teeth allows you to make more accurate and cleaner cuts through wood.
• Plywood blades: These kinds of blades have the highest number of teeth that you will find on a commercial saw blade. The blades often have over 100 teeth. The purpose of these blades is to make the absolute finest cut possible with minimal damage or ripping is done to the wood.

Abrasive blades

Abrasive blades or discs are a unique kind of saw blade. They don’t “cut” like traditional circular saw blades do. Instead, abrasive discs work in a similar fashion to grinders. Abrasive discs tend to be out of different abrasive materials as well. Silicon carbide and aluminum oxides are two of the most widely used material to produce abrasive circular saw blades.

Abrasive discs are useful for cutting through hard materials like steel. You can also use them for your masonry jobs although a diamond blade is a much-preferred choice.

Diamond Blades

These are blades made out of steel with synthetic diamonds speckled throughout them. The diamond circular saw blade is mainly used for masonry works. These blades can cut through very hard materials like concrete, bricks, stones, and tiles.

Continuous rim blades

These blades have no teeth, which is the main thing that differentiates them from standard circular saw blades. These kinds of blades are specifically designed to cut through materials like tile. Therefore, they are not particularly suited to cutting through the wood; that job is better left to standard circular saw blades.

Turbo rim blades

Conceptually, turbo rim blades are very similar in appearance to continuous rim blades in that both have no teeth. However, turbo rim blades are serrated, which gives them a lot more raw cutting power. Because of this, turbo rim blades are the kind of saw blades that you want to use when you need to cut through really tough materials like say concrete or brick.

Segmented blades

Segmented blades are rimmed with diamond edges. However, each edge is separated by a small gullet, which sets them apart from turbo rim blades and continuous rim blades. Because of these gullets, segmented blades are able to deliver a lot of cutting power, but with less accuracy and surface finish. If you need to quickly cut through tough materials like hardwood, concrete, or brick, and you don’t care about resulting rough cut edges, then a segmented blade is the best option.

Wet Vs Dry Cutting

Some of the circular saw diamond blades are for wet cutting while others can only do the dry cutting. Which one to choose, depends on your circular saw and the type of application.

Dry Cutting: If you have a small handheld circular saw or a cordless one, then dry cutting blades may be your only option. Dry cutting is recommended for intermittent cutting. If you are doing home improvement jobs where you are working within limited space, dry cutting blade is a great choice.

Wet Cutting Blades: In case of wet cutting water is used to absorb the heat from the blade as well as to wash away the debris. Wet cutting is the preferred method for masonry work especially for tile cutting since it works faster, cleaner. Another advantage of wet cutting is that it provides longer tool life.

However not all electric circular saw support wet cutting since there is the risk of electric shock.

Circular Saw Basics – Hook angle and kerf

There are two other very important concepts to consider when buying a circular saw blade. First off is the idea of a hook angle. Saw blades come in various hook angles; ranging from a high of around 20 degrees to a low of about.5 degrees. The higher a blades’ hook angle, the more effective it is going to be at ripping through softer materials. So, if you want to cut through a lot of softer material, very quickly (like softwood) then go for blades with a higher hook angle. On the other hand, blades with a lower hook angle deliver more precise cuts, but they cut at a much slower rate.

Another important concept is the idea of a blade’s kerf number. This is really just a fancy way of referring to how thick a blade is. Blades that are thicker (aka ones that have a higher kerf number) are better for cutting through tough materials and they tend to be more durable. Blades that are thinner (aka ones with a low kerf number) are better for making smaller, but more accurate cuts; however, they are less durable and not as good for cutting through larger amounts of material.

Blade size

Circular saw blades come in a variety of sizes. This is important to keep in mind since certain size blades only work with certain kinds of saws. For example, a smaller sized blade (such as a 7-inch blade) is only going to work with smaller circular saws, such as handled models. Likewise, bigger blades (such as 12-inch blades) will work with bigger models, like table saws. Needless to say that, the smaller diameter blades cut shallower than larger blades.

So before you buy the blade, check your saw and find out the arbor size and the maximum diameter it can accept.

Best Circular Saw blades for different material

In this section, I will quickly go over what the best circular saw blade type is for cutting each kind of material.

Woodworking Blade

For cutting wood, I say the best option is to go with a standard circular saw blade. For something as simple as cutting wood, there is no reason to go for a more expensive saw blade. Depending on the kind of woodworking, you will want to be careful about how many teeth the blade has. If you are just cutting through large amounts of lumber, then I recommend going for a blade with a lower number of teeth, it will save you time. If you need precision, make sure you get a blade with a high number of teeth, the more teeth, the more precise your cuts will be.

Blade for Plywood

Because of how thin plywood is, you will want to go for a very precise standard saw blade. A lot of circular saws come with a blade that they recommend using for thin materials like plywood. My advice is to ditch that and buy a specialty blade. The blades manufacturers include with their saws are almost always the wrong kind and they will decimate plywood.

By investing in a low kerf, high tooth count blade, you will ensure that you can accurately cut through plywood without damaging the edges. You can use the plywood cutting blade to cut laminate as well.

Circular Saw Blade for Metal

Non-Ferrous Material: Carbide tipped non-ferrous blades are ideal for cutting aluminum and other softer metals like lead, brass, and bronze. If you are going for this type of blade, I suggest you get a blade with an anti-kickback design.

Ferrous Metal: If you have a job or project that requires you to take your circular saw to steel, then I wholeheartedly recommend investing in an abrasive blade. Those are the absolute best option for cutting steel and harder materials.

If you use the wrong kind of saw blade, you risk damaging your circular saw.

Tip Not all circular saws accept abrasive discs. Make sure that your circular saw model supports the use of abrasive blades. DO NOT use abrasive blades on a table saw to cut metal. It is a dangerous practice.

Masonry Concrete Cutting Blades

For cutting concrete, a diamond blade such as a segmented or turbo rim blade is essential. Much like with woodworking, the specifics depend on what you need the concrete to look like afterward.

If you just need aggressive, speedy cutting, then go for a segmented blade. If you want a bit more precision, a turbo rim blade is the best option for cutting through concrete with some precision.

Abrasive discs can also be used for light-duty masonry work. One advantage of the abrasive blade is that they are much cheaper when compared to diamond blades. However abrasive disc wears out pretty fast and requires a lot more time to accomplish your task. The most efficient circular saw blade for concrete and tiles cutting is a diamond blade designed for wet cutting.

MOST HATED Recip Saw Blade by Other BRANDS!

Circular Saw Blades Infographic

See the infographic below that represents the best blade for each type of work.

Conclusion

So many people invest so much thought into what kind of circular saw they are going to buy for a job that they forget to think about what sort of blade they are going to use. By using this guide, you can make an informed purchase about what circular saw blades to use for each job; which will save you time and money down the road.

Can I use the circular saw blade on a table saw?

Yes. However, using a circular saw blade on a bench saw has its pros and cons. Advantages Thin Kerf: Since the circular saw blades are thin, they require less power to cut through. The thin kerf also produces less sawdust and result in more usable wood.

Inexpensive: The circular saw blades are cheap compared to table saw blades.

Disadvantages Depth of cut: Circular saw blades generally available from diameter 4-1/2 inches to 7-1/4 inches. If you use this smaller diameter blade on your 12 inches table saw, you will end up with a shallow depth of cut.

Circular Saw blade direction, which way?

A Circular saw is designed to cut upwards. That means unlike the table saw, the direction of blade rotation is anti-clockwise. Nearly all the manufacturers have the direction marked on the blade guard. All you need to do is to make sure that the directions of arrows on the blade and on the saw body are in the same way. Look at the image below for explanation. Installing the blade in the wrong direction will result in damaged cutting edges and excessive heat.

How to change circular saw blade?

Replacing the blade on a circular saw is pretty simple. Here are the steps:

• Unplug your circular saw. If it is battery powered, remove the batteries.
• Find the blade lock. Nearly all the circular saws have an arbor lock switch.
• Push the blade lock and slowly rotate the blade with your other hand until the blade lock mechanism engages.
• In some cases, you may have to push the lower guard back.
• Use the correct wrench to remove the arbor nut (blade stud) while holding the blade lock button.
• This is a normal right-hand thread nut. So you have to loosen the nut by rotating in the anti-clockwise direction, which is the same direction the blade rotates.
• Remove the washer and lift the blade slightly up to remove it from the arbor.
• Blow air and clean the inside of upper and lower guard.
• Slip in the new blade. Make sure that the blade teeth are in the right direction.
• Place the washer and lock the nut/blade while the blade lock is engaged.

Here is a video that explains the process.

Tip: Before you put the blade stud back, put a drop of oil on the threads to make sure that they don’t get rusted and you can easily unlock the nut next time.

Can I sharpen the circular saw blade?

Yes. Ideally, you should do it on a tool and cutter grinder or use a special blade sharpener. How severely the cutting edges are just dull and not severely damaged, you can sharpen the blade by yourself. You can use file and oil stone to sharpen the standard wood cutting blades that are made out of steel. Here is a video that explains the process.

You could also mount the blade in reverse direction on a table saw and move the blade up until it touches an oil stone that is fixed on the table. Here is an article on sharpening the blade with oil stone. Carbide tipped blades: If you have a diamond wheel you can fix that on your table saw and touch the carbide tips to make them sharp. However, I do not recommend this to novice users since it can be dangerous and may cause injury. Send your carbide blades to a professional resharpening service provider to get the best result.

• Types of circular saw blades

• Blade Selection Guide
• Standard circular saw blades
• Abrasive blades
• Diamond Blades

• Blade size

• Woodworking Blade
• Blade for Plywood
• Circular Saw Blade for Metal
• Masonry Concrete Cutting Blades
• Circular Saw Blade FAQ

Types of Concrete Saw Blades

The potential tool used for cutting concrete, bricks, asphalt, and other solid materials is a concrete saw. It is often referred to as a road saw or Consaw. Concrete saw blades are diamond-tipped due to their fast cutting of hard materials. Concrete saws are more efficient than conventional saws.

Concrete saw blades are essential for the construction industry. It is used consistently and efficiently to cut concrete and another masonry.

In today’s market, there are various types of concrete saw blades available. The cutting blade selection depends on the depth of the concrete you are cutting. All concrete cutters serve the same function, while some of others are more durable and reliable than others for quality work.

In this article, we’ll discuss different types of concrete saw blades. Here you will also know the various methods of sawing concrete.

Methods of Sawing Concrete

There are two different methods of sawing, which are:

Dry Concrete Sawing

For outdoor projects, the dry concrete sawing method is better as it creates a lot of dust on the sawing site. If it consists of a diamond, the blade of the Saw’s blade can be kept cold in the absence of water.

A diamond blade can contribute to decreasing the build-up of dust. This technique involves making brisk cuts that are very small and are progressively made deeper to avoid the edge from heating.

Wet Concrete Sawing

Wet concrete sawing is an eco-friendly method of sawing as well as beneficial to the health of workers. It produces less dust due to the presence of water moisture.

The water in the wet sawing keeps the blade self-lubricating, cool and increases the its lifespan.

Six Types of Concrete Saw Blades

The various kinds of concrete saw blades used to cut concrete depend on the role for which it is being used. There are six common forms of commonly used blades.

Corundum Masonry Blade

Corundum masonry blades are used for short and shallow cutting. Concrete is a hard material to cut, and that is why the edge of masonry don’t last for longer. They quickly wear off or crack.

The blades of the Corundum Masonry Blade are possibly available at low cost but need more hard work. Cutting with masonry blades produces a lot of dust that makes the edges very hot. Their primary use is for shallow cuts.

Diamond Blades

Diamond blades are the most popular concrete saw blades for both wet and dry sawing. In concrete cutting, diamond saw blades are the most effective. These blades have a disc of steel that has a rim containing the diamonds.

BEST 14 INCH DIAMOND BLADE FOR CONCRETE

There are metal and diamond composite on the sides of the diamond blades. Diamond blades are used for more in-depth and longer cuts. They have serrated edges that, keep the blade cool during the cutting process when used for dry cutting. Although, It produces lots of dust.

There are different types of diamond blades to provide you the fastest and cleanest cuts.

Turbo-Rim Blade

Turbo rim blades are the traditional blades used to cut concrete. These blades with a serrated rim that cuts through rough and hard materials such as concrete and bricks.

The main reason why most professionals choose this unique concrete cutting blade is that it is more potent than other brands of continuous rim blades. However, even though the turbo-rim blade is reliable for cutting concrete, it does not leave a smooth finish because of the serrated rim.

How to Choose the Right Circular Saw Blade

Segmented Blades

Segmented blades cut concrete through their diamond edges. Also, this particular blade is built with a rim that uses gullets to break. Because of the segments it possesses, segmented blades are considered healthy and straightforward to use.

Besides, these segments often allow the blade to cut quickly than other kinds of blades designed for concrete cutting. You may use this same blade to cut other rigid materials, such as bricks, along with concrete cutting.

Abrasive Blades

Abrasive blades are also popular forms of concrete saw blades used to cut concrete. The abrasive blades are also used to cut several tough rigid materials, such as bricks and even metal.

Abrasive blades do not have segments or edges like other forms of blades for concrete cutting. It is cut with the help of an abrasive material such as silicon carbide or aluminum oxide to cut hard hardened materials.

Circular Saw Blade

Circular saw blades are used to cut hard surfaces like concrete and bricks with an abrasive or diamond blade.

However, before you start cutting, it is necessary to set the depth of the circular saw. A circular saw effectively cuts concrete, and also leaves a smooth finish.

What is the Best Blade for Cutting Concrete?

Diamond saw blades are the best blade for cutting concrete. When it comes to making smooth, professional concrete cuts, it is the perfect blade for breaking concrete and asphalt. However, at a wide variety of price ranges, you’ll find countless blade choices within this group.

When you cut hard things, you need a soft, bonded diamond blade of concrete. You need a hard-bonded diamond blade when you cut soft material, like asphalt.

Your cutting won’t be perfect without a high-quality saw blade, whether you are sawing control joints, improving the concrete with elegant grading, or cutting off existing concrete for fixing or reconstruction.

You can not depend on only one kind of blade to do all cutting tasks correctly or perform the same job in different types of concrete blades.

Conclusion

These are numerous diamond cutting blades for concrete available in the market. If you choose to use some of these tools to cut concrete, you may be required to purchase the one that suits your needs or rent from a hardware store.