Common Walker Zero-Turn Mower Problems. Walker zero turn mower
Common Walker Zero-Turn Mower Problems
Although Walker zero-turn mowers are durable, efficient, built to last, and comfortable to use.
It is possible for your Walker zero-turn mower to develop a fault at any time and this can be frustrating, especially when you have an overgrown lawn that needs trimming.
In this article, we share well-detailed Walker zero-turn mower problems and practical fixes to ensure smooth mowing operation.
But before we jump right into the possible solutions…
- Some of the most common Walker zero-turn mower problems are:
- Walker Zero-Turn Mower Problems: Causes and Solutions
- 1. Walker Mower Fails to Start
- 2. Mower Loses Power and Dies
- 3. Walker Zero-Turn Mower Smokes
- 4. Weak Hydrostatic Transmission
- 5. Mower Won’t Steer Correctly Or Drive Straight
- 6. Walker Zero-Turn Mower Won’t Move
- 7. Walker Mower Cranks But Won’t Start
- 8. Vibration Problems
- 9. Uneven or Bad Cut
- 10. Walker Zero-Turn Mower Won’t Crank
- 11. Engine Overheats
- 12. Leaking Gas
- 13. Walker Zero-Turn Mower is Difficult to Start
- Troubleshooting Tips
- How Do You Clean the Carburetor on a Walker zero-turn mower?
- Spray Carburetor Cleaner Into The Air Intake
- Take Pictures for Reassembly
- Turn off the Fuel Supply
- Take off Choke Cable and Throttle Cable
- Remove the Filter Housing
- Take Off the Springs
- Remove the Float Bowl
- Inspect the Stem for Plugged Holes
- Inspect the Carburetor for White Crusty Build-up
- Reassemble the Carburetor
- Fill the Gas Tank with Fresh Gas Mixed With A Fuel Additive
- Tools Required For Cleaning Walker Carburetor
- Top Recommended Handy Tools for Troubleshooting Servicing Your Lawn Mower
Walker Zero-Turn Mower Problems: Causes and Solutions
Walker Mower Fails to Start
If your Walker mower won’t start, it might be because of air or gas restrictions not allowing the engine to get the required air and gas to run.
This can occur as a result of a defective spark plug, bad solenoid, a failed electrical component or a dead battery.
Mower Loses Power and Dies
Your Walker zero-turn mower can lose power when the air or gas systems are compromised, affecting the mower’s operation.
This problem may be related to clogged fuel lines, a dirty carburetor, a bad air filter, and bad gas.
| Cause | Reason for Problem | Solution |
| Bad Gas | Gas degrades over time making the fuel less efficient and liable to engine damage and clogging the fuel system | Drain the gas tank and fill it with fresh gas. Use fuel additives to stabilize fuel |
| Broken or dirty cooling fins | The cooling fins may be filled with oil, grass, and dirt which will not allow the air to properly cool the engine block | Clean the cooling fins orreplace them with new ones |
| Blocked air filter | Grass and dirt can block the air filter to prevent air flow | Remove the filter andclean it. Replace it if it is in a bad condition |
| Clogged fuel lines | Dirt and gas deposits can accumulate and block the fuel lines, causing the engine not to get the required gas | Clear the clog out the fuel line by using compressed air and carb cleaner |
| Dirty carburetor | This may be caused by bad gas and ethanol deposits which prevents the flow of fuel | Clean all the parts that make up the carburetor or replace if needed |
Walker Zero-Turn Mower Smokes
Your Walker zero-turn mower can smoke when the oil gets into the cylinder and starts to burn off.
Some parts begin to burn as a result of increased friction from low oil capacity. This can also result in internal engine failure.
| Cause | Reason for Problem | Solution |
| Internal problems including engine gasket, piston ring or valve train | Internal engine problems may cause serious effects if they are not quickly detected and fixed | Take the mower to a local small engine shop for fixing |
| Low engine oil level | Lack of oil may increase friction in the engine, causing extreme heat in the engine | Take the mower to a small engine repair shop to check for engine damage |
| Blocked air filter | Grass and dirt can block the air filter which prevents air flow | Take off the air filter and clean it or replace it if it is bad |
| Excess oil in the crankcase | Too much oil can cause pressure to build in the engine, enabling oil to gain access into the cylinder through the valve train | Drain a little engine oil until it meets manufacturer’s recommended oil level |
Weak Hydrostatic Transmission
A weak hydrostatic transmission may occur due to a worn or broken drive belt or tensioner pulley.
| Cause | Reason for Problem | Solution |
| Faulty tensioner pulley | If the tensioner pulley fails, it fails to keep the tension on the drive belt | Replace the pulley and grease the tensioner arm |
| Old or low hydraulic oil | Old or low hydraulic oil may not lubricate the hydraulic system, causing the hydraulic system to be weak | Check the hydraulic oil periodically to be sure thatThe hydraulic fluid is full. Change the hydraulic oil regularly in line with the recommendations of Walker |
| Bad drive belt | A bad drive belt may prevent the pump from functioning well | Replace worn, cracked, or frayed belt |
Mower Won’t Steer Correctly Or Drive Straight
Your zero-turn radius mowing machine may experience these problems as a result of bad dampers, worn steering parts, and incorrect tire pressures.
The tracking may be off on your Walker zero-turn mower, causing it to veer off to the left or right.
Walker Zero-Turn Mower Won’t Move
This is one of the common problems of a Walker zero-turn mower.
This can occur as a result of a missing idler spring, bad drive belt, or worn tensioner pulley.
If the drive release lever and transmission bypass rod aren’t in the right position, it may cause the mower not to move.
Walker Mower Cranks But Won’t Start
Your Walker zero-turn mower may crank but not start because of a faulty PTO interlock switch.
Use a multimeter to check for its continuity to check if it is defective. A bad fuse may also be another likely problem. Ensure that you check the three fuses to know if it is bad.
| Cause | Reason for Problem | Solution |
| Faulty PTO interlock switch or bad fuse | A bad PTO interlock switch or fuse will prevent the mower to start after cranking | Call a technician to troubleshoot the problem. You may replace fuse if it is in a bad condition |
Vibration Problems
The Walker zero-turn mower may vibrate because of unbalanced or damaged blades, or failing components including bearings in the clutch, spindle housings, and pulleys.
Other possible causes include loose components and hardware on the mower, and debris lodged under the mower’s pulleys and other places where small items can get stuck in the mower.
Uneven or Bad Cut
Your Walker zero-turn mower may cut unevenly because of defective components such as a damaged or worn blade, unleveled mower deck, uneven tire pressures, clogged mower deck and slow engine speed.
Walker Zero-Turn Mower Won’t Crank
If you notice that the mower fails to crank, the problem may come from a bad connection on the starter. It is important to locate the starter and check if the wires are not rusty.
| Cause | Reason for Problem | Solution |
| Bad connection on the starter | A bad connection may happen if the wires are rusty. | Locate the starter, remove the nut and clean the wires |
Engine Overheats
The engine of your Walker zero-turn mower can overheat due to low engine oil level or restricted airflow, affecting the operation of the mower.
| Cause | Reason for Problem | Solution |
| Low engine oil level | The engine may overheat because the oil level is low. | Fill the crankcase with the right amount and weight of oil. |
| Restricted airflow | There is a restriction in the air flow | Clean debris and grass clippings from and cooling fins and blower housing. |
Leaking Gas
This issue may occur if the carburetor bowl gasket is damaged. This will affect the operation and functionality of the Walker zero-turn mower.
| Cause | Reason for Problem | Solution |
| Damaged or missing Carburetor bowl gasket | A damaged carburetor bowl gasket can cause gas to leak | Replace the carburetor bowl gasket |
Walker Zero-Turn Mower is Difficult to Start
Some Walker owners have complained about the mower taking much time before starting. This may be due to a clogged carburetor.
When gas is left for a long time, it becomes sticky and clogs your carburetor.
Walker Zero-turn Mower Not Getting Gas
If your Walker zero-turn mower does not get gas, the problem may be due to:
- Bad Fuel
- Plugged fuel filter
- Clogged fuel lines
- Bad fuel pump
- Dirty Carburetor
Troubleshooting Tips
- Use a siphon pump to drain the gas tank and refill it with fresh fuel. Ensure that you add a fuel additive to the fresh gas to clean and stabilize the fuel system.
- Replace the clogged fuel filter with a new one.
- Replace the fuel line with a new one.
- Replace a damaged fuel pump with a new one.
- To clean the dirty carburetor, spray the carburetor cleaner into the air intake.
How Do You Clean the Carburetor on a Walker zero-turn mower?
Here are the steps for cleaning the carburetor of your Walker zero-turn mower:
Spray Carburetor Cleaner Into The Air Intake
The first step to take is to remove the air filter from the air filter housing. Spray the carburetor cleaner into the air intake.
Check if the engine will start and continue to operate. If the engine does not start but shuts down, you need to disassemble the carburetor for cleaning.
Take Pictures for Reassembly
It is advisable to take photos while you disassemble it. Some components might come apart and you may find it difficult to remember their position when you have disassembled them.
Taking photos of this process will enable you to reassemble them with ease
Turn off the Fuel Supply
To shut off the fuel supply, you need to use pliers or a fuel hose pinch to crimp the fuel line. You can also turn off the fuel shut-off valve. After that, take off the fuel line from the carburetor.
Take off Choke Cable and Throttle Cable
Remove the choke cable and throttle if your mower has one.
Remove the Filter Housing
Take off the nuts and screws that attach the carburetor to the filter housing.
Take Off the Springs
Slowly remove the springs but you need to be careful not to stretch them out.
To remove the springs, you have to twist the carburetor a bit. Ensure that you do not tear the gasket that is found between the carburetor and engine block.
Remove the Float Bowl
You can locate the float blow at the base of the carburetor. The float bowl is where the gas is stored in the carburetor. This component is held by a screw.
Before removing the bowl, ensure that you clean around the outer part of the carburetor bowl to eliminate dirt. After that, remove the screw from the bowl’s base.
Make sure that you get a rag to catch the remaining gasoline in the bowl.
Do not damage the o-ring while trying to remove the bowl. In addition, make sure that you do not get the carburetor cleaner on the o-ring.
Inspect the Stem for Plugged Holes
A clogged stem will prevent the carburetor from bringing fuel to the jet. Locate the holes with a flashlight and disconnect them with a thick wire.
Inspect the Carburetor for White Crusty Build-up
Use a carburetor cleaner to remove white crusty material. It is quite impossible to get all the white deposits out of the carburetor.
Reassemble the Carburetor
After cleaning, you can now reassemble the carburetor. Check the photos that you took earlier to be sure that the parts are in the proper position.
Reattach parts to the carburetor including choke and throttle cable( if it uses one), fuel line, filter housing, and springs.
Fill the Gas Tank with Fresh Gas Mixed With A Fuel Additive
Fill the gas tank with fresh gas and mix it with a fuel additive. Allow the gas to fill the carburetor’s bowl and start the engine.
Note: You may need to replace the carburetor if it is in a bad condition.
Conclusion
If you notice that your Walker zero-turn mower is giving you issues, the first step to take is to figure out the causes. Some of the problems include vibration problems, weak hydrostatic transmission, and starting issues.
Follow the recommended fixes to get your Walker zero-turn mower working again. If your mower does not work properly after trying these troubleshooting tips, it might be best to seek a technician’s help.
Top Recommended Handy Tools for Troubleshooting Servicing Your Lawn Mower
| Multimeter – This is useful for checking voltage, continuity current to identify electrical problems in your mower | Filter Wrench – For loosening your mower’s filter. |
| Carburetor Cleaner – Choke and Throttle Body Cleaner for cleaning clogs buildup in the fuel system. | Blade Balancer–Balances Blades After Sharpening. |
| Fuel Stabilizer – This stabilizes cleans your fuel to reduce fuel system buildup | Battery Inflator – This helps to ensure your mower tires stay inflated to prevent steering or uneven cutting issues. |
| Socket Allen Wrench Set – These tools are needed to service troubleshoot your mower problems | Tachometer– Evaluates your mower’s engine performance and provides accurate data about the status of the engine |
| 12-Volt Battery Charger – This is useful for charging your mower battery. | Lawn Mower Blade Sharpener– Adjustable Lawn Mower Blade Sharpener for Right and Left Hand Blades. |
Sam has over a decade experience in landscape and yard maintenance. He enjoys testing and reviewing different yard tools.
Get the Job Done Faster with Compact, ManeuverableWalker Mowers
Walker Mowers are known for having a smaller footprint than other mowers, and maneuver in and out of places most mowers cannot thanks to their compact, unique steering system. Winfield Power Equipment LLC offers a huge selection of Walker Mowers, so whether the job is big or small, we’re sure to have the right mower for you. Check out our selection of Walker Mowers, including the: B-Series, C-Series, D-Series, H-Series, S-Series, and the T-Series.
WALKER S-SERIES
The S-Series is the original Walker Mower; built to be compact and flexible. It uses a smaller engine and a simple drive train and shares most of the attributes of the Walker high-performance models.
WALKER T-SERIES
The T Series is used for lawn maintenance professional. You get an ideal balance of power, sharpness, durability, and versatility for a wide range of mowing applications.
Get Your Premium Walker Equipment Today!
View our wide selection of Walker Equipment online, or feel free to contact us at 330-343-2747 or stop by our showroom in Strasburg, OH today. we can’t wait to match you with the right Walker Mower equipment to get your job done right!
Contact Winfield Power Equipment LLC
Trust us to provide you with the outdoor power solutions you’ve been searching for! Call us at (330) 343-2747 or stop in today.
Why Should You Buy a Walker Mower?
As you begin your search for the perfect lawn mower, you’ll find there are plenty of impressive options on the market. Walker is one of the most popular brands offering a wide range of high-quality mowers. They’re dedicated to providing machines that deliver amazing power, productivity, and dependability. With so many models, deck styles, and add-ons to choose from, you’ll be able to find something perfectly tailored for your needs.
Whether you’re tackling residential or commercial properties, there are many noteworthy features that make Walker mowers an excellent choice. Keep reading to learn more, and when you are ready to check out our selection of models for sale, get in touch with us at Burrows Tractor. You’ll find us in Yakima and Wenatchee, Washington, as well as North Plains, Oregon.
Lightweight Sturdy
Walker mowers are equipped with a number of impressive features to deliver an exceptional mowing experience. The compact, lightweight design of each model makes it easy to weave around tight spots on your property. Unlike heavy machines that can damage your lawn, these models are gentle on the grass, which helps you to keep your yard looking healthy and beautiful with each cut.
Comfort
Taking care of your lawn is a tedious task and involves loads of time and effort. The last thing you need is a mower with an uncomfortable seat and controls that are hard to reach. Walker mowers are equipped with an ergonomic seat that takes into consideration the best way to position your body to alleviate unnecessary pressure and strain. Fingertip steering and cruise control combine to create an enjoyable and comfortable riding experience. You’ll glide across the grass, not noticing bumps even at faster speeds.
Precision Cut
Everything about the design of Walker mowers is geared towards delivering an impressive quality cut. The torsion-flex carrier frame facilitates a flexible deck that cuts with precision on uneven surfaces. If you want a fantastic-looking lawn, you’ll simply love the front-mount deck that reduces the impact on turf before it gets cut. This is better for your lawn and leaves a more consistent looking cut behind.
Your Options
Small yards that are half an acre or less in size can often be easily maintained with a walk-behind mower. On the other hand, larger properties that are more than one acre may need something with more power and durability, like a zero-turn lawnmower. It’s easy to find the right Walker mower because there are so many choices available to you. Pick from the collection, side discharge, rear discharge, or mulching decks. You’ll have no problem finding the ideal deck for the cutting width, material capacity, or grass type you need.
Attachments and Implements
Walker lawnmowers can handle more than just trimming the grass. These machines are compatible with the full line of attachments, making them an incredibly versatile option for all your yard maintenance tasks. By opting for an attachment, you may even be able to avoid buying a second piece of equipment.
For example, a snowblower attachment allows you to clear your driveway during winter. Add a dozer blade for grading, or connect a trailer to haul tools and materials around your property. You’ll be able to switch from grass trimming to other tasks without breaking a sweat. You can also boost your mower with upgrades, like high-performance tires, headlights, or even armrests and a cup holder to make your lawn care even more enjoyable!
Looking for Walker mowers near Portland, OR? If you want more information, call us or visit our locations in Yakima and Wenatchee, WA, as well as North Plains, OR. We carry a wide range of models and can help you find your perfect fit! Burrows Tractor proudly serves those in Kennewick, Ellensburg, and Richland, WA.
Why Should You Buy a Walker Mower?
As you begin your search for the perfect lawn mower, you’ll find there are plenty of impressive options on the market. Walker is one of the most popular brands offering a wide range of high-quality mowers. They’re dedicated to providing machines that deliver amazing power, productivity, and dependability. With so many models, deck styles, and add-ons to choose from, you’ll be able to find something perfectly tailored for your needs.
Whether you’re tackling residential or commercial properties, there are many noteworthy features that make Walker mowers an excellent choice. Keep reading to learn more, and when you are ready to check out our selection of models for sale, get in touch with us at Burrows Tractor. You’ll find us in Yakima and Wenatchee, Washington, as well as North Plains, Oregon.
Lightweight Sturdy
Walker mowers are equipped with a number of impressive features to deliver an exceptional mowing experience. The compact, lightweight design of each model makes it easy to weave around tight spots on your property. Unlike heavy machines that can damage your lawn, these models are gentle on the grass, which helps you to keep your yard looking healthy and beautiful with each cut.
Comfort
Taking care of your lawn is a tedious task and involves loads of time and effort. The last thing you need is a mower with an uncomfortable seat and controls that are hard to reach. Walker mowers are equipped with an ergonomic seat that takes into consideration the best way to position your body to alleviate unnecessary pressure and strain. Fingertip steering and cruise control combine to create an enjoyable and comfortable riding experience. You’ll glide across the grass, not noticing bumps even at faster speeds.
Precision Cut
Everything about the design of Walker mowers is geared towards delivering an impressive quality cut. The torsion-flex carrier frame facilitates a flexible deck that cuts with precision on uneven surfaces. If you want a fantastic-looking lawn, you’ll simply love the front-mount deck that reduces the impact on turf before it gets cut. This is better for your lawn and leaves a more consistent looking cut behind.
Your Options
Small yards that are half an acre or less in size can often be easily maintained with a walk-behind mower. On the other hand, larger properties that are more than one acre may need something with more power and durability, like a zero-turn lawnmower. It’s easy to find the right Walker mower because there are so many choices available to you. Pick from the collection, side discharge, rear discharge, or mulching decks. You’ll have no problem finding the ideal deck for the cutting width, material capacity, or grass type you need.
Attachments and Implements
Walker lawnmowers can handle more than just trimming the grass. These machines are compatible with the full line of attachments, making them an incredibly versatile option for all your yard maintenance tasks. By opting for an attachment, you may even be able to avoid buying a second piece of equipment.
For example, a snowblower attachment allows you to clear your driveway during winter. Add a dozer blade for grading, or connect a trailer to haul tools and materials around your property. You’ll be able to switch from grass trimming to other tasks without breaking a sweat. You can also boost your mower with upgrades, like high-performance tires, headlights, or even armrests and a cup holder to make your lawn care even more enjoyable!
Looking for Walker mowers near Portland, OR? If you want more information, call us or visit our locations in Yakima and Wenatchee, WA, as well as North Plains, OR. We carry a wide range of models and can help you find your perfect fit! Burrows Tractor proudly serves those in Kennewick, Ellensburg, and Richland, WA.
