DIAMOND DISH-CUP FOR GRINDING WITH AN ANGLE GRINDER. Diamond grinding cup

How to Select the Correct Diamond Concrete Grinding Cup Wheel

Investing in great equipment for your next flooring project is a huge decision. We all want reliable and cost-effective machines. But choosing the right product is no easy task!

Working on any concrete grinding projects lately? Then you might be in the market for the best concrete grinding wheel.

If you find yourself standing over the grill, dreaming of the perfect concrete grinding tools, then look no further.

Before you burn another burger, take a gander through this article. We’ll cover everything you need to know about how to select a diamond concrete grinding wheel, how to use one, and where to get it.

Diamond Concrete Grinding Cup Wheels 101

In diamond tooling plates, segments of diamond are bonded to backing plates or removable block inserts. By mounting a diamond grinding cup wheel to a concrete grinder, you can chip away at concrete, granite, and marble.

Fun fact: diamonds rank 10 on the Mohs hardness scale. That makes a diamond the hardest substance we know of! Not just a pretty face, huh?

But diamonds are also very brittle. They can shatter during a sharp impact. Because of this, it’s important to select a diamond grinding cup wheel that has the right segment bond.

Let’s review this and a few other important aspects of your cup wheel:

Picking the Right Surface Area

First, you want to make sure you have the right size cup wheel for your project. If you’re grinding concrete, then you might want a bigger wheel than you’d need for a small paint removal job.

Wheels with a smaller surface area tend to be more aggressive. In other words, these wheels leave more scratching behind on the surface you’re grinding.

Bigger wheels with more segments tend to give you the smoothest finish. Make sure you’re clear on your resurfacing plan before you select the size of your concrete grinding wheel.

What’s in a Bond?

Since the diamond is a brittle gem, the bond matters. A good segment bond will protect the diamonds and keep them in place.

A bond wears out over time to reveal more of the diamond. If you’re grinding a hard surface, you want a cup wheel with a softer bond. This bond will wear out quickly so the sharp diamond pieces can get to work.

If you’re working on a soft and/or gritty surface, you want to go with a harder bond. This helps keep the diamond from wearing out too fast.

Looking Into Segment Shape

The three central parts on the cup wheel are called ‘segments.’ These diamond pieces are attached to the cup in several different ways.

Bigger segments work better on tough surfaces like stone or concrete.

If you’re working on a smaller job, you would go with smaller segments. These are great for removing paint or epoxies.

What About Grit?

The last factor you need to consider is grit, which tells you how coarse or fine your diamond is. If you’re using a concrete floor grinder on a coarse surface, you want a diamond with a coarser grit (30 to 40 should do the trick).

If you want to polish your surface, you’ll need a tool with higher grit. Anything above a 40 grit will give you a smoother surface.

Keep in mind that higher grit grinding cup wheels take longer to use. You want to balance your end result and your productivity when you are looking into grit levels.

Categorizing Concrete Grinding Wheels

There are several main categories of diamond grinding cup wheels out there. One of the first things to look out for is whether your grinding wheel is a ‘double row’ or a ‘single row.’

The term ‘row’ refers to the diamonds placed around the rim of your cup wheel. A single row grinding wheel works well with most concrete repair projects. Its diamonds are concentrated and give you more control.

A grinding wheel with two rows of diamonds around the rim has twice the grinding power of the single row option. It’s perfect for smoothing rough surfaces in a quick fashion.

Another popular form of the wheels is called the ‘turbo row’. The diamonds set around the rim resemble the look of a turbine engine. These wheels are easy to handle and don’t produce as much dust as other options.

If you are looking to work on a surface like marble, you might consider a wheel with a continuous rim. These rims are entirely covered in diamonds. They are known for their power to smooth fine surfaces.

The last category of grinding wheels is a bit of a catch-all. Any cup wheel with a different segment pattern falls into this category. These can work well with unique surfaces on a case-by-case basis.

Finding Your Dream Concrete Grinding Tool

Whether you’re planning a simple concrete grinding job or an elaborate piece of stamped concrete art, we are here to help.

Once you’ve landed your next concrete job, take a moment to revisit this article. Make sure you’ve selected a concrete grinding wheel that has the right size, shape, bond, and grit level.

Take a look at the different wheel categories available, and find one that suits your needs.

Here at Onfloor Technologies, we are committed to innovation in our product line. We also pride ourselves on making the process of floor restoration as easy as possible for our customers.

Drop Us a Line

We know that selecting floor restoration tools can be a challenging process. That’s why we are passionate about getting you the best tools with the longest lifespan.

We look forward to helping you meet your equipment needs, so you can continue to deliver high-quality work to your clients.

If you’d like to learn more about your next concrete grinding wheel or speak to a floor restoration specialist, then get in touch. We look forward to hearing from you!

DIAMOND DISH-CUP FOR GRINDING WITH AN ANGLE GRINDER

These products are referred to as diamond dish wheels or diamond cup wheels. These wheels improperly used can be dangerous: They run at 80 m/s on angle grinders and can eject parts at a speed of 288 km/h (180 mph) in case of breakage. FEPA has designed this page to provide the essential safety recommendations for use of diamond dish/cup wheels on angle grinders, with maximum diameter of 180 mm.

Abrasive Products

These recommendations FOCUS on diamond dish/cup wheels for grinding with angle grinders. They consist of superabrasive segments (diamond/CBN) attached to a shaped metal core. Design can vary considerably.

Safety recommendations for the use of diamond dish/cup wheels for grinding with angle grinders

80% of the accidents are due to a misuse of the abrasives products. Theis website has been realised by the FEPA experts to spare the end-users to get hurt while using this kind of products.

What is a safe product? What should I look for?

■ FEPA recommends that only diamond dish/cup wheels conforming to EN 13236 and marked as such should be used.

■ Diamond dish/cup wheels not bearing EN 13236 may not conform the highest safety standards.

■ All wheels should be examined carefully for damage or defects before fitting on the machine.

How should I handle and store the wheels? 8A

■ All diamond dish/cup wheels are fragile. They should be handled with care.

■ Keep wheels in their original packing on a rigid surface until their immediate use.

How should I fit the wheel on the machine? 8C

■ Follow carefully the instructions given in the machine handbook.

■ Never fit a diamond dish/cup wheel which is too loose or too tight on the flange.

■ Tighten only with the tool supplied with the machine.

■ Ensure the wheel is properly gripped to prevent slippage, but do not tighten with excessive force. Never use a hammer.

■ Keep flanges and screw threads clean and free of burrs and rust.

■ Replace distorted or damaged flanges before fitting the wheel.

■ Refer to the FEPA recommended mounting check list.

How should I protect myself?

■ FEPA recommends the use of following personal protective equipment (often written PPE):

• Eye protection
• Ear protection (ear sets)
• Hand protection (gloves)
• Lung protection (dust mask, also called respirator)

■ Never remove the protective machine guard and make sure it is properly adjusted to deflect debris away from you.

■ Ensure that no other person is at risk, especially near the machine while working.

How should I handle the wheel after use? 8E

■ Before storing the machine or transporting it to another location, always remove the wheel and store it as recommended.

■ Always carefully examine the wheel for damage or defects, and destroy and discard if damaged.

■ When disposing of worn out or defective wheels, it is recommended to damage them to prevent someone from removing them from waste and re-using them.

How can I get proper training?

■ It is a legal requirement for all employees involved in the use of abrasive wheels to be properly trained and also re-trained on a regular basis. They should consult their employer if they have not received this training.

■ The wheel manufacturer or supplier can advise you on suitable accredited training providers.

■ As a private consumer, you should read carefully the safety information found in:

• The grinding machine handbook
• The FEPA general safety principles leaflet (see above)
• The FEPA safety leaflet for this specific application (soon available)

Confirm your age

Are you 18 years old or older?

Come back when you’re older

Sorry, the content of this store can’t be seen by a younger audience. Come back when you’re older.

MESA DIAMOND DIAMOND GRINDING CUP WHEELS

Diamond cup wheels are designed to use for grinding; cutting; polishing concrete, hard concrete, marble, granite, and field stones; and can be also used for removing paint, chemicals and film, epoxy coating, mastics, water-proofing coating and markings lines.

Diamond cup grinding wheels of the highest quality for masonry, stone, and similar materials. Use for concrete deburing, rough-surface grinding, and form mark removal, as well as leveling and preparing concrete and stone surfaces. Each wheel is CNC spin balanced for improved grinding precision and reduced vibration and noise. For fast, aggressive grinding at a low cost, using 9 and 14 segment wheels provides best results. Wheels with 18 and 24 segments are designed to grind more smoothly and last longer.

The innovative design of diamond cup wheels allows fast material removal and a smooth finish while reducing vibration for improved operator comfort. Depending on the hardness and nature of the concrete or other masonry materials need to be grinding, the type of diamond cup wheels should be using will be determined by your application. Diamond cup wheels are suitable to use for concrete diamond grinder, floor grinder and walk behind concrete grinder. The majority of them have large holes for better dust collection and to keep the cutting blade cool.

Mesa Diamond designed their diamond cup wheels as single-row diamond cup wheels, double-row diamond cup wheels and turbo diamond cup wheels. Also, engineered to provide the most efficient results on grinding applications such as concrete grinding, floor grinder, coating removal, shaping and polishing of concrete surfaces etc. Mesa Diamond has a wide range of styles and configurations to meet all of your grinding application and surface preparation needs.

How to Select the Correct Diamond Concrete Grinding Cup Wheel

Investing in great equipment for your next flooring project is a huge decision. We all want reliable and cost-effective machines. But choosing the right product is no easy task!

Working on any concrete grinding projects lately? Then you might be in the market for the best concrete grinding wheel.

If you find yourself standing over the grill, dreaming of the perfect concrete grinding tools, then look no further.

Before you burn another burger, take a gander through this article. We’ll cover everything you need to know about how to select a diamond concrete grinding wheel, how to use one, and where to get it.

Diamond Concrete Grinding Cup Wheels 101

In diamond tooling plates, segments of diamond are bonded to backing plates or removable block inserts. By mounting a diamond grinding cup wheel to a concrete grinder, you can chip away at concrete, granite, and marble.

Fun fact: diamonds rank 10 on the Mohs hardness scale. That makes a diamond the hardest substance we know of! Not just a pretty face, huh?

But diamonds are also very brittle. They can shatter during a sharp impact. Because of this, it’s important to select a diamond grinding cup wheel that has the right segment bond.

Let’s review this and a few other important aspects of your cup wheel:

Picking the Right Surface Area

First, you want to make sure you have the right size cup wheel for your project. If you’re grinding concrete, then you might want a bigger wheel than you’d need for a small paint removal job.

Wheels with a smaller surface area tend to be more aggressive. In other words, these wheels leave more scratching behind on the surface you’re grinding.

Bigger wheels with more segments tend to give you the smoothest finish. Make sure you’re clear on your resurfacing plan before you select the size of your concrete grinding wheel.

What’s in a Bond?

Since the diamond is a brittle gem, the bond matters. A good segment bond will protect the diamonds and keep them in place.

A bond wears out over time to reveal more of the diamond. If you’re grinding a hard surface, you want a cup wheel with a softer bond. This bond will wear out quickly so the sharp diamond pieces can get to work.

If you’re working on a soft and/or gritty surface, you want to go with a harder bond. This helps keep the diamond from wearing out too fast.

Looking Into Segment Shape

The three central parts on the cup wheel are called ‘segments.’ These diamond pieces are attached to the cup in several different ways.

Bigger segments work better on tough surfaces like stone or concrete.

If you’re working on a smaller job, you would go with smaller segments. These are great for removing paint or epoxies.

What About Grit?

The last factor you need to consider is grit, which tells you how coarse or fine your diamond is. If you’re using a concrete floor grinder on a coarse surface, you want a diamond with a coarser grit (30 to 40 should do the trick).

If you want to polish your surface, you’ll need a tool with higher grit. Anything above a 40 grit will give you a smoother surface.

Keep in mind that higher grit grinding cup wheels take longer to use. You want to balance your end result and your productivity when you are looking into grit levels.

Categorizing Concrete Grinding Wheels

There are several main categories of diamond grinding cup wheels out there. One of the first things to look out for is whether your grinding wheel is a ‘double row’ or a ‘single row.’

The term ‘row’ refers to the diamonds placed around the rim of your cup wheel. A single row grinding wheel works well with most concrete repair projects. Its diamonds are concentrated and give you more control.

A grinding wheel with two rows of diamonds around the rim has twice the grinding power of the single row option. It’s perfect for smoothing rough surfaces in a quick fashion.

Another popular form of the wheels is called the ‘turbo row’. The diamonds set around the rim resemble the look of a turbine engine. These wheels are easy to handle and don’t produce as much dust as other options.

If you are looking to work on a surface like marble, you might consider a wheel with a continuous rim. These rims are entirely covered in diamonds. They are known for their power to smooth fine surfaces.

The last category of grinding wheels is a bit of a catch-all. Any cup wheel with a different segment pattern falls into this category. These can work well with unique surfaces on a case-by-case basis.

Finding Your Dream Concrete Grinding Tool

Whether you’re planning a simple concrete grinding job or an elaborate piece of stamped concrete art, we are here to help.

Once you’ve landed your next concrete job, take a moment to revisit this article. Make sure you’ve selected a concrete grinding wheel that has the right size, shape, bond, and grit level.

Take a look at the different wheel categories available, and find one that suits your needs.

Here at Onfloor Technologies, we are committed to innovation in our product line. We also pride ourselves on making the process of floor restoration as easy as possible for our customers.

Drop Us a Line

We know that selecting floor restoration tools can be a challenging process. That’s why we are passionate about getting you the best tools with the longest lifespan.

We look forward to helping you meet your equipment needs, so you can continue to deliver high-quality work to your clients.

If you’d like to learn more about your next concrete grinding wheel or speak to a floor restoration specialist, then get in touch. We look forward to hearing from you!