FLAIL MOWER FRONT/REAR. Side mower for tractor
Tractor Mowers
Check out our line-up of Quality Heavy Duty Mowers, Rototillers, Wood Chippers, Augers, Snow blowers, Land Level, Graders, Bale Grabbers, Pallet Forks and Sweepers.
O.T.S Auto Electric, stocks three point hitch tractor attachments, implements and accessories that you need to get the job done.
With such a wide variety of attachments to choose from at reasonable prices, you never have to be without a tractor attachments that you need.
Finding the right attachment for your job does not have to be complicated.
Click the links above to shop our inventory or call us if you need help picking an attachment.
We stand behind our attachments, and are licensed under the Alberta Farm Implements Act.
All attachments come with a one year warranty from defects.
Browse our extensive selection of attachments for your tractor or contact us if you have any questions. Look no further than O.T.S Auto Electric for great value and high performance.
Our experienced professionals will ensure you get the correct model of attachment you need to match the tractor HP and the work you need to do.
DR POWER
DR Power continues to lead in the design and manufacture of innovative and durable power products. Over the last year the investment in homeowner property maintenance—by both consumers and professionals—has been unprecedented. So, we are especially excited about our new product lines for 2022.
Included in this catalog you’ll find our all-new Commercial XD Series Field and Brush Mowers. These machines are built for the rigors of continuous use and are chock-full of professional features including hydrostatic drive for the ultimate ease of operation.
As a leading manufacturer of power equipment for those who have come to expect nothing but the best, we look forward to exceeding expectations in 2022!
Flail Mowers
O.T.S. Auto Electric carries two styles of conventional Flail Mowers, the Value Jam series and the Heavy Duty NBM series. These mowers are great for mowing grass and small trees. With three staggered rows of cutting teeth, not a blade of grass is missed. Great for Tractors in the 15HP to 55 HP range.
Jam T
Flail mowers are designed to mow grass, bush and small trees (size of tree depending on the model). Three rows of staggered hammer blades lift, cut and then mulch the grass, brush and trees.
The Jam T has manual side shift allowing the mower to be placed in different positions behind the tractor. This allows the mower to mow directly behind the tractor or off to one side.
The Jam T has a double spiral rotor, external SKF bearings, and comes with hammer or y blades.
| Working width | 145cm | 155cm | 175cm |
| Number of hammer blades | 24 | 24 | 28 |
| PTO | 540 | 540 | 540 |
| Weight | 194 | 199 | 212 |
| Tractor HP | 18-30 HP | 22-35 HP | 25-35 HP |
NBM FLAIL MOWER
The NBM series of flail mowers are NorthWind’s heavy duty mowers. They are designed to mow grass, shrubs and small trees.
Hydraulic side shift allows the operator to move the mower side to side from the operators seat in the tractor.
The Northwind NBM mowers are balance tested, have three rows of hammer blades to mow and mulch.
| Working Width | 145 cm | 185 cm | 195 cm | 220 cm |
| PTO | 540 | 540 | 540 | 540 |
| Flail Type | Hammer | Hammer | Hammer | Hammer |
| Number of flails | 24 | 28 | 28 | 32 |
| Weight | 350 kg | 386 kg | 403 kg | 444 kg |
| Tractor Horse Power | 30-35 | 40-50 | 45-85 | 45-85 |
KDK FLAIL MOWER
The North Wind KDK HEAVY DUTY mower was designed for large mowing areas. Mowing widths up to 300 cm (9 feet 10 inches) Heavy Duty design to mow small trees around the perimeter of a field.
| Working width | 160 cm | 220 cm | 240 cm | 300 cm |
| PTO | 540 | 540 | 540 | 540 |
| Flail type | Hammer | Hammer | Hammer | Hammer |
| Number of Flails | 20 | 20 | 22 | 26 |
| Weight | 510 kg | 530 kg | 580 kg | 1230 kg |
| Tractor Horse Power | 50-85 | 50-85 | 60-85 | 85-120 |
Boom/Verge Mowers
Features: Boom mowers are designed to mow slopes and ditches while your tractor remains on the flat surface. With hydraulic side shift you can mow behind or beside your tractor and around obstacles such as trees. The hydraulic shift combined with vertical and horizontal angle movement makes these mowers extremely versatile. The three rows of hammer blades can go from mowing grass to cutting small trees(up to 3″ diameter) and shrubs.
Northwind Commercial/Heavy Duty Mowers Additional Features: Extra Heavy Duty 3 point Hitch Frame Italian CMR Gear Box Slip Clutch PTO Shaft Double Spiral Rotor Heavy Duty Hammer Blades.
| Cutting width | 180cm 5’11” | 200cm 6’6.5” | 220cm 7’3” |
| Tilt-up angle | 90 degrees | 90 degrees | 90 degrees |
| Tilt-down angle | 55 degrees | 55 degrees | 55 degrees |
| Vertical Extending Distance | 218cm 7 feet | 238cm 7 feet 9 inches | 258cm 8 feet 6 inches |
| Horizontal Extending Distance | 234.5cm 7 feet 8 inches | 234.5 cm 7 feet 8 inches | 234.5 cm 7 feet 8 inches |
| PTO Speed | 540 CAT II | 540 CATII | 540 CAT II |
| Weight | 705 kg/1554 lb | 735 kg/1620 lb | 804 kg/1773 lb |
| Number of Flails | 16 | 18 | 20 |
| Tractor HP | 65-110HP | 80-110 HP | 90-120 HP |
Northwind Medium Duty Boom/Verge Mower These medium duty Boom mowers come in two sizes and are perfect for smaller tractors.
VAM 165 These medium duty boom mowers are perfect for smaller tractors.
| Cutting Width | 160 cm |
| Tilt up angle | 90 degrees |
| Tilt Down Angle | 55 degrees |
| Vertical Extending Distance | 141 cm |
| Horizontal Extending Distance | 227 cm |
| PTO Speed | 540 |
| Weight | 319 kg |
| Number of Flails | 28 |
| Category | I |
| PTO | 540 |
| Tractor HP | 30-50 HP |
Brush Cutter, Brush Hog for Skid Steer
For tough land clearing applications Standard Duty Skid Steer Brush Cutter Standard Low Flow Brush Cutter 11 GPM – 20 GPM
- 3’’ Cutting Capacity.
- 3/16’’ Deck with 3/8″ A36 reinforced sides.
- 40 HP Right Angle gear box.
- 2 blades with stump jumper.
- High torque Motor with 3000 PSI Relief Valve 180 cm cutting width
Walk Behind Brush Mower
Pro Series Walk Behind Brush Mower
Turn on a dime – almost effortlessly!
Each wheel is equipped with a hand-operated disc brake. Just squeeze the brake on one side and the mower will pivot around that wheel. This simple but highly effective system lets you easily navigate around trees and obstacles … or make a 180 degree turn at the end of a row.
ALL WALK BEHIND MODELS FEATURE:
- Gear driven transmission
- 3 forward speeds/ 1 reverse
- Pivoting Deck
- Commercial Grade Electric Clutch
- Attachment Compatibility
- Adjustable Handle bars
- Custom Made Spindles
- 18″ x 6.5″ Lugged tires
PIVOTING DECK
Follows the contours of your land, providing a cleaner cut and reducing the chance of scalping.
EVERYTHING AT YOUR FINGERTIPS
All operating functions are on our control panel or on the handgrips: electric start, operator presence, throttle, gear shift, blade engagement, and independent wheel brakes.
Pro Max 34 Now with side discharge
Hardened Steel Blades these big blades weigh up to 6 pounds and are a full ¼” thick. (optional extra heavy duty brush blade available for sustained mowing in thick brush
ADJUSTABLE HANDLEBARS for a comfortable working height
Only DR gives you the choice of models with 26″, 30″ or 34″ wide mowing decks
EVERYTHING AT YOUR FINGERTIPS All operating functions are on our control panel or on the handgrips: electric start, operator presence, throttle, gear shift, blade engagement, and independent wheel brakes.
PRO MAX34 Now with side discharge!
ELECTRIC CLUTCH This extremely rugged clutch enables you to engage the blade instantly, with the pull of a knob. Because the “communication” is electrical, there are no cables or linkages to adjust or wear out.
HARDENED STEEL BLADES These big blades weigh up to 6 pounds and are a full 1/4″ thick. (Optional Extra HeavyDuty Brush Blade available for sustained mowing in thick brush.)
Attachments
Cuts a clean, even 42″-wide swath and mows a half-acre lawn in about 30 minutes. Front caster wheels swivel for fast, tight turns. Deck is made of 12-gauge steel with 2 high-lift mulching blades. Easily converts from side-discharge to mulching. Height adjustment from 2″ to 4.5″.
Throw snow off long driveways and walkways with our single-stage, 30″-wide Snow Thrower attachment. The powerful auger quickly chews through dry or wet snow, and towering snowdrifts. Throws snow up to 30 feet. Adjustable skid shoes.
SKU A0000267409
An 18-pound flywheel creates tremendous inertia for smooth chipping. The single chipping knife takes up to 40 bites per second, for quickly devouring hardwood branches up to 3.5″ thick. Now you can rid your property of unsightly brush piles.
Tow Behind Field Brush Mowers
STAY SEATED. CONTROL IS AT YOUR FINGERTIPS! A remote control allows you to engage and disengage the mower blade from the driver’s seat of your tow vehicle.
HINGED HITCH Our unique Hinged Hitch makes it easy to hook up to ATVs, UTVs, and lawn and garden tractors (minimum 14 HP and/or 400 lbs.) with a pin hitch, regardless of the height of the vehicle’s hitch. If you’re not offsetting the mower, you can just use the shorter towbar.
ELECTRIC LIFT PRO MAX52T model features an electric lift for easily adjusting mowing height from driver’s seat.
FLOATING DECK RIDES OVER OBSTACLES The deck is suspended from a frame, allowing it to ride up and over high points, minimizing scalping and protecting the drivetrain from damage.
BLADES EXTEND BEYOND THE WHEEL PATH The 2 mowing blades extend outside of the wheels—so you mow right up next to fences, walls, hedgerows, and other obstacles.
SHOCK-ABSORBING “SWINGING” BLADES If you hit an obstacle, blades PIVOT, protecting engine and spindle.
Tow Behind Finishing Mower
- 60″ Wide Cut
- Tow with a Riding Mower, ATV, UTV, or Tractor
- Use as an outrigger to your traditional riding mower (or Zero-Turn) and EXPAND your cutting width
3 AIR-TIP BLADES provide excellent lift and deliver a clean finish cut
ELECTRIC START, THROTTLE CONTROL and BLADE ENGAGEMENT at your fingertinips.
Walk Behind Trimmer Mowers
DR invented the trimmer-on-wheels category and we have perfected it over the years!
STURDY ALL-STEEL FRAME The mainframe on every DR Trimmer Mower is made of heavy-duty 14-gauge steel. These lightweight frames are incredibly strong, and powder-coated to resist rust and corrosion. OFFSET FRAME DESIGN Ensures that the cut reaches outside the wheel path, making it easy to trim up against fences and foundations. BLADE BRAKE CLUTCH (BBC) The BBC allows you to stop the trimmer head from spinning (by releasing the bail bar) without stopping the engine— cutting down on how often you need to restart. (Not on Pilot Model). ADJUSTABLE HANDLEBAR Easily adjusts without tools. RUGGED CAST-ALUMINUM BEARING ASSEMBLY Cast entirely from lightweight, highstrength aluminum, the main Bearing Assembly has roller bearings at the top and bottom—to withstand the rigors of hundreds of hours of heavy-duty trimming and mowing at over 3,000 rpm.
PULSE 62V: World’s FirstBATTERY-POWEREDTrimmer Mower!
- LIGHT AND MANEUVERABLE (just 45 lbs including battery)!
- ULTRA QUIET…mow any time of day without disturbing neighbors!
- TRIM FOR UP TO 40 MINUTES on a single charge (equivalent to a tankful on our gas models)
NO GAS, NO FUMES, NO FUSS!Powering up is as simple as inserting the battery and using the push-button electric start.QUICK-LOCK TRIMMER HEADThe PULSE 62V model uses a customized version of our Quick-Lock Trimmer Head. Change cord in seconds without tools!850W BRUSHLESS MOTORbrings all the power of gas to your trimming tasks. Plus, it’s so QUIET that you can trim or mow any time of day without disturbing your neighbors.ERGONOMIC HANDLEBARSwith vibration-dampening hand grips make operating for extended periods easy and comfortable.
THE RIGHT CORD FOR THE JOB.
Patented Quick-Lock Cord Attachment System
Offers 3 Benefits Unmatched by ANY Other Cord System: SIMPLY PUSH CORD IN TO ATTACH 1-way cam allows cord to enter, but it cannot pull out, even in brushy conditions. SELECT A WIDE RANGE OF CUTTING HEIGHTS From 1″ to 7.5″ (depending on the Trimmer Mower model). ACCEPTS 225 MIL SAWTOOTH CORD AND 255 SERRATED CORD The thickest, longest-wearing cords in the industry. Quick-Lock Trimmer Head Kit Standard on all Tow-Behind Trimmers Our DR Cord is thicker and tougher than normal trimmer line and that translates into more power for cutting gnarly vegetation. In addition to being STRONGER, DR cord LASTS much longer than any trimmer. PLUS, we offer a great assortment of cord, in a variety of bulk options— PRECUT LENGTHS The ultimate in convenience, cord is precut to the right length for all DR Trimmer Mower models. 1 LB ROLLS Economical 1-pound rolls. Cut it to length as you need it and save versus buying precut. Each roll includes from 80 to 250 feet of cord (depending on the cord size). JUMBO SPOOLS For those who trim and mow frequently, these spools offer the lowest possible “per foot” cost. Up to 394 ft of cord included.
Beaver Blade Attachment Turns Your Trimmer Mower Into A Brushcutter On Wheels
The Beaver Blade Attachment, which easily installs on any Walk-Behind Trimmer Mower model, allows you to cut brush and even small trees up to 3″ thick! The Beaver Blade should always be used with the Aluminum MowBall Support.BEAVER BLADE Attachment Packageincludes Aluminum Mow-Ball Support and sharpening file.DR DURABLADES ur DR DuraBlades easily mow through brambles, vines, stalky weeds like burdock and cattails, and woody brush up to 3/8″ thick. Plus, they are 100 times stronger than our cutting cords!DR DuraBlade KitReplacement Blades 6 pack
FLAIL MOWER. FRONT/REAR
Online shop for flail mower. buy cheap mowers
E A mower or flail mower, called embankment mower, is a machine for mowing and at the same time shredding the crop.
The main purpose of the mowers is the maintenance of fallow land and the maintenance of the landscape.
Areas of application of a flail mower
Municipalities mainly use flail mowers to maintain the green strips along the streets or other unused green spaces.
In agriculture. flail mowers are used to care for fallow land. Much more important, however, is the comminution of greenery (catch crops), which are then worked into the soil by, for example, tillers and thus lead to an improvement in the humus content of the soil. Forestry uses flail mowers to keep green areas free or to use areas that were previously planted with trees.
Tree nurseries, fruit growing and viticulture use rock mowers to keep the cultivation lanes clear between the rows of fruit trees, fruit trees, fir trees or vines, since the vegetation there should no longer be kept low with weed killers.
Another important task for mowers is the shredding of the annual pruning of crops, which is often done automatically. For cost reasons, the cut back of the wood is no longer collected and should then be shredded together with the grass.
Types of execution of the flail mower
Flail mowers are mostly driven by the PTO shaft of a tractor or Unimog and are designed as front or rear attachments. Alternatively, there are also hydraulically driven mowers with often smaller working widths, which are mounted on a hydraulically controllable boom. Flail mowers for front attachment support 1000 rpm in addition to the standard PTO speed of 540 rpm.
Flail mowers either have a fixed working position on the tractor, whereby the mower usually protrudes laterally over the right rear wheel of the tractor, so that mowing flush with the edge is made easier. Alternatively, mowers can use a hydraulic shift to change the position behind the tractor while it is in motion.
This makes working on obstacles such as trees, bushes or bridges easier. Side mowers or mowers are guided on a hydraulically controlled arm and can cut pits and slopes to the right of the tractor at an angle of.60 °. to 90 ° mowing out and are therefore even suitable for cutting back hedges.
There are also motor-driven flail mowers. which are often pulled by an all-terrain towing vehicle. Here, either very small areas or difficultly situated slopes are also the main area of application, as are very damp soils that are not accessible by tractors all year round due to their high weight.
The use of motor-driven flail mowers in solar parks in fields. where the main aim is to keep sunlit green areas particularly on the outer edges of the system, has been a frequent feature in recent years. It is necessary to mow them so that they do not grow against the solar panels from below, which would reduce their energy yield. Because of the sensitive technology, large tractors and their attachments are often not suitable because the solar panels are positioned too close to the ground.
The special design of flail mowers results in a clean cut even with tall, matted grass. If the flail mower is used correctly, the clippings are shredded so much that this does not need to be collected afterwards, as it rots very quickly and at the same time lets light and air into the meadow below, so that this can continue to grow without impairment.
There are two basic types of mowers: rotary or sickle mowers and the much more common flail mowers. With the sickle mower, rapidly rotating horizontal blades shred the grass.
Here, however, objects such as branches, stones or tree stumps almost always lead to severe damage to the device, as the entire drive is designed to be at the level of the knife.
Technical specifications of our flail mowers
In the much more robust flail mowers. the tractor drives a rotor shaft that rotates quickly in the opposite direction of travel via a transmission gear. The shaft rotates at 2000 to 2300 rpm. On this rotor shaft are movably attached massive hammer mallets which, depending on the design of the flail mower, can weigh between 320 g and 1500 g.
The Hammerschlegel cut off any kind of vegetation at the set height and shred the material inside the flail mower in the shortest possible time, which is also where jagged, replaceable counter-blades play a major role.
During work, the full length of the flails protrudes from the rotating rotor shaft. so that this rotor shaft is approx. 15 to 20 cm from the ground. This prevents this wave from coming into contact with foreign objects in the meadow. The power requirement of a flail mower is 12 to 18 kW per meter of working width compared to other mowing machines.
However, it is very advantageous that a flail mower can also process branches and small pieces of wood and stones do not cause any damage to the machine. If appropriate special flails are used, even branches up to 40 mm in diameter can be shredded, which is a common application in fruit and wine growing.
Buy mowers in our online shop. Shipping is free and you get the best price-performance ratio on the German market.
Our current mower product range:
Flail reach mowers
Brushcutter 1.3. Hydraulic side arm with 32 hammers Bi-directional operation of the mulcher head Floating system for self-levelling to the ground Hydraulic rotation with safety device 1300 mm working width, 1100 kg weight For tractors.
side-mount reach mower ZA6 4700
mowing boom is made for professional use in waterway maintenance. The reach of up to 9 m from vehicle centre paired with the swivel range of up to 220° are unmatched. Hard to reach areas are no problem.
mounted reach mower 5630
Working width: 1.2, 1.5 m
BERKY 5630 Hydro Flail Mower With Hatch And Clearing Conveyor The premium model of the 5600 series combines the power and the easy operation of the BERKY 5610 Flail mower.
mounted reach mower SH1sx,SH1dx
Working width: 50 cm
The Brushcutter for vineyard is designed for multiple uses in the vineyard to solve more quickly and precisely machining in inter-row areas, for cutting the grass and to remove the sideshoots. The methodology of construction of this.
tractor-mounted reach mower M290S APS
Working width: 60 cm
Our “GARDEN” compact range for cutting grass and bushes. Suited for 20-40 HP tractors.
tractor-mounted reach mower M380S
Working width: 80 cm
Our “GARDEN” compact range for cutting grass and bushes. Suited for 40-50 HP tractors.
tractor-mounted reach mower M480S
Working width: 100 cm
Compact range for cutting grass, bushes and pruning. Suited for 50-70 HP tractors.
tractor-mounted reach mower DR3
Working width: 1.1, 1.3 m
-Floating head.Rear adjustable roller.Helical cut rotor.Hydraulic break-back with autoreset facility (Optional).Oil cooler Specific rotor.Articulated Y blades for grass, shrubs Interchangeable on the same rotor.3.
tractor-mounted reach mower DR2
Working width: 0.8, 1.1 m
-Floating head.Rear adjustable roller.Helical cut rotor (Optional).Holding bracket (Optional).Oil cooler.Arttculated Y biades (or grass. Shrubs
tractor-mounted reach mower DR4
Working width: 1.1, 1.3 m
-Floating head.Rear adjustable roller.Helical cut rotor.Hydraulic break-back with autoreset facility (Optional).Oil cooler Specific rotor.Articulated Y blades for grass, shrubs Interchangeable on the same rotor.3.
tractor-mounted reach mower RBEP25
Working width: 1.2 m
tool holder must be equipped with a crushing head or cutter bar ( see ” Accessories / Wear ” at the bottom of the page ).Reach to tractor: 2,50. 2,60 m depending on equipment.3 point linkage cat 1 or 2.PTO speed.
tractor-mounted reach mower RBEP30
Working width: 1.3 m
tool holder must be equipped with a crushing head or cutter bar ( see ” Accessories / Wear ” at the bottom of the page ).Reach to tractor: 3. 3,20 m depending on equipment.3 point linkage cat 1 or 2.PTO speed.
mounted reach mower RBEPLTB50
Working width: 50 cm
Crushing head for toolholder RBEP25Working width crushing head: 50 cm.Reach to tractor on RBEP25 : 2,50 m.Crushing head with articulation of 186°, hydraulic control and floating position.Helicoidal rotor.Rotation.
side-mount reach mower
Working width: 0 cm. 200 cm
JUMBO weighs 900 kg, which allows you to carry it with small capacity vehicles like trucks with license B or trailers towed by car The load that JUMBO is able to lift is 500 Kg JUMBO has four drive wheels each of which is driven by a.
mounted reach mower DHPS Series
Working width: 620, 720, 820 cm
Semi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 120cm. flail mower, mod. TP 120 (professional) and rotor with knife A, to cut up to 6/7cm, with.
mounted reach mower DHIS 32080
Working width: 820 cm
EQUIPMENT: Three point linkage, cat. II., PTO 1000 rpm, Drive shaft gr.6, Locking tie rods,170mm adjustable rear roller. Flail mower mod. TPCT 130, with rotor type F. Pivoting arm frame with hydraulic.
mounted reach mower DHP/AV 33000
Working width: 610, 710 cm
road-side banks, for grass, bushes and branches, with 120cm. flail mower, mod. TP 120 (professional) and rotor with knife A, to cut up to 6/7cm, with second arm with hydraulic system to move the mower.
mounted boom mower FFA series
Working width: 3 m. 6.9 m
bronze bushings in the joints Optional:.Working tools.Lopper, ground drill, flat mower head, ditch cutter, hedge trimmer, delineators washing brush, flail mower head, stump cutter.
mounted reach mower KWT series
Design Arm mounted to tractor’s rear 3-point linkage Additional stabilizing brackets (KWT, CAMEL) High suspended original arm enables safe drive over obstacles Opened cover on hydraulic and electrical units Hydraulic unit Independent.
self-propelled reach mower ILF Alpha
Energreen presents the new self-propelled hydrostatic machine with arm ILF Alpha. A high technology level machine with telescopic arm that guarantees high performances, safety and working flexibility. Born from an award-winning project.
rear-mount reach mower RIO series
Working width: 105 cm
Hydraulic reach mower with first lower arm attachment, suitable for users who need to reach more depth and distance. Frame in cast metal guaranteed with 3 years warranty. Mechanical safety.
mounted reach mower GREEN SHARK series
Working width: 60, 80, 102, 122 cm
Reversible bush cutters with hydraulic arm, suitable for mini-tractors with rear power lift or reversible direction of movement. Ideal for the upkeep of both public and private parks and gardens. Standard Features Shock-proof device.
mounted reach mower GRIFFON 1132, 1141
Working width: 1,010, 1,040 mm
mounted reach mower MOW1
Working width: 48 cm
Hydraulic mower for excavator for professional use, has a compact design which makes it suitable for a very quick and precise cut, guaranteed by 24 nylon wires (which can be increased up to 42), fixed to a head controlled.
mounted reach mower DA series
Working width: 640, 840, 1,080 mm
designed for mini-midi excavators with operating weight up to 5.5 tons. The built-in-unit carpentry in our DA (standard) flail mower series, allows it greater resistance to possible accidental impacts. The.
tractor-mounted reach mower RMB1-1 series
Working width: 60, 59, 39, 47 in
tractors equipped with cabs only and protective screen material must be installed when using rotary mower heads. CONSTRUCTION FEATURES All RMB Boom Mowers are equipped with hydraulic.
mounted reach mower MERCURE III
Working width: 1.2 m
side-mount reach mower GRENADIER Series
workspace is created. A standard model of the Grenadier is available with reach between 6.40 meters and 8.80 meters. On request, Herder can even develop arms which have a reach of 11 meters. Various.
mounted reach mower TWIGA series
Working width: 3.2 m. 8.9 m
professional solutions; Spearhead’s TWIGA series really is the first choice for all of your reach mowing needs. Spearhead boasts one of the most extensive fleets of reach mowers available.
mounted reach mower EFDL105 115 125
The verge flail mowers are designed for small tractors, power required in 18-30HP. They are used for the flat land grass, the weeds in the slope and bush side trimming. 2. The machine has passed.
mounted reach mower MLM 200
Regular and continuous care of roadside vegetation is an important factor for the safety of all road users. The reflexion post mower MLM 200, which is specially designed for use around posts, crash barrier supports and.
mounted reach mower KR-600Z
Hydraulic arm KR-600Z can be connected with almost every hydraulic head from ROLMEX,s offer. KR-600Z is designed for professional users and used in all ground conditions (even in the hard ones!). Thanks to its robust construction and.
rear-mount boom mower Microklippa
Working width: 1.2, 1.5 m
small compact tractors to small pivot steer loaders, in conjunction with a front mount kit. Key Features:.3.2m or 3.5m reach.Left or Right hand cutting (swing over capability).Cable or Electronic Proportional.
front-mount reach mower Twiga Compact 320, Twiga Compact 420
arm geometry. Lightweight and compact. Wide range of working tools Spearhead Twiga Compact 320 and 420, is a compact reach mower designed for compact tractors. The Twiga can be used anywhere in the.
reach your clients in one place, all year round
Your suggestions for improvement:
Filters: find the right products faster. Terminology: use the most common industry terms. Brands: a wider selection. Products: to improve the relevance of the collection. Other
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how AgriExpo processes your personal data.
With AgriExpo you can: Find a nearby distributor or reseller| Contact the manufacturer to get a quote or a price | Examine product characteristics and technical specifications for major brands | View PDF catalogues and other online documentation
are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
New Holland Tractor with Alamo Side and Rear Flail Mowers
Our New Holland tractor with flail mowers offers the operator various benefits when mowing in rougher and higher terrain areas. The Alamo flail mowers also offer the ability to mow heavier grass and to provide a rough cut to tall grass.
Make: New Holland Year: 2001-2002 Model: TS90 Manufacturer: New Holland Attachments: Alamo Side and Rear Flail Mowers Gross Horsepower: 90 HP (67.1 kW) PTO Horsepower: 70 (52.2 kW) Traction: 2WD Weight: 7275-9722 pounds Fuel Capacity: 42 gal Engine: 90Hp Diesel
Online Rate: 1 Day: 375.00 1 Week: 1,125.00 4 Weeks: 2,700.00
The displayed rates do not include the taxes or optional charges that may be selected later in the checkout process
Description
Safety Training
It is very important that you are properly trained on all safety and equipment protocols when running the commercial equipment. You are required to wear all safety equipment recommended by the manufacturer and to be properly educated on all safe operations for the machinery.
Operator/User assumes all responsibility for the use, care, and inspection of this equipment and use of Personal Protective Equipment.
Safety Requirements for All First Class Asset Rental Clients
