How to Cut Ceramic Tile with a Grinder. Grinder to cut tile

How to Cut Marble Tiles

This article was co-authored by Art Fricke and by wikiHow staff writer, Hunter Rising. Art Fricke is a home renovation and repair specialist and the owner of Art Tile Renovation based in Austin, Texas. With over 10 years of experience, he specializes in bathroom and kitchen renovations. Art focuses on a single contractor approach to customized renovation work, and performs projects such as installing custom tile showers, fixing tiled shower leaks, replacing cracked tiles, and installing floor and wall tile.

There are 10 references cited in this article, which can be found at the bottom of the page.

This article has been viewed 105,910 times.

Marble tiles look great in a bathroom or kitchen, but sometimes you may need a smaller piece of tile to fill in a gap. While ceramic tiles can be scored and snapped, marble needs to be cut completely or else it will shatter. You can use either a wet saw to make straight lines or an angle grinder to make curves as long as you have a diamond blade. Once you make your cuts, you can make marble tiles any size you need.

Choosing a Blade and Taking Safety Precautions

• Look for diamond blades at your local hardware store or online.
• The size of your blade depends on the model of your machine. Check with the instruction manual to see what size blade it requires.

Tip: If you don’t want to mark your tile directly, place a straight piece of masking tape on the tile and use a marker to draw your line on it. It’s okay to cut through the tape.

• Most hardware stores should carry all of the safety equipment you need.
• You may wear work gloves if you want, but they’re not necessary.

Making Straight Cuts with a Wet Saw

• How you change the saw blade and the direction it spins depends on the model of wet saw that you have. Consult the instruction manual to learn how to properly install the blade.

Tip: Some saws come with a blade wrench you can use to tighten the nut. If your saw doesn’t have one, a ratchet wrench will work.

• Wet saws kick up water while you use them, so you may need to refill the reservoir if you plan on cutting multiple tiles.
• Since you’re working electronics and water, plug the saw into a GFCI outlet. GFCI outlets will automatically turn off the power if any of the electronic components in your saw get wet. [6] X Research source
• Saw blades usually cut out 1 ⁄8 inch (0.32 cm) from your material, so make sure your blade is on the scrap side of your line.
• Making this relief cut prevents the tile from chipping or breaking when you cut through it completely.

Cutting ceramic tile How to cut wall and floor tiles with angle grinder and hand cutter

• If you’re cutting a narrow piece of tile, use a wooden guide to hold the tile from the other side. This way, the smaller piece won’t break or kick back.

Cutting Curves with an Angle Grinder

• Check your grinder’s rotation in the instruction manual and compare it to which direction the arrow faces on your blade. If they go in opposite directions, install the blade upside-down so it cuts the right way.
• Keep your fingers clear from your blade so you don’t accidentally cut yourself.
• Don’t attempt to cut through the entire tile right away since it may create sparks or break your blade.

Follow along with the line again to cut through the tile completely. Turn on your grinder again and start from one side of your cut line. This time, push the grinder through the rest of the tile so it cuts through it completely. Push the grinder slowly in a straight line so it doesn’t jump out of the cut. [13] X Research source

Expert QA

Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Art Fricke is a home renovation and repair specialist and the owner of Art Tile Renovation based in Austin, Texas. With over 10 years of experience, he specializes in bathroom and kitchen renovations. Art focuses on a single contractor approach to customized renovation work, and performs projects such as installing custom tile showers, fixing tiled shower leaks, replacing cracked tiles, and installing floor and wall tile.

So marble is really beautiful, but it is pretty expensive. You can achieve a very similar look and effect with ceramic tile. Ceramic will cost maybe a third of what marble will cost and you’ll still get a really elegant look.

Thanks! We’re glad this was helpful. Thank you for your feedback. As a small thank you, we’d like to offer you a 30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy! Claim Your Gift If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even 1 helps us in our mission. Support wikiHow

If you need other ideas for ways to cut tile, check out the wikiHow How to Cut Tiles without a Tile Cutter.

You Might Also Like

An Expert-Approved Guide to Cutting Brick like a Pro

How to Drill Into Brick: Preparation, Tools, and Best Methods

About This Article

This article was co-authored by Art Fricke and by wikiHow staff writer, Hunter Rising. Art Fricke is a home renovation and repair specialist and the owner of Art Tile Renovation based in Austin, Texas. With over 10 years of experience, he specializes in bathroom and kitchen renovations. Art focuses on a single contractor approach to customized renovation work, and performs projects such as installing custom tile showers, fixing tiled shower leaks, replacing cracked tiles, and installing floor and wall tile. This article has been viewed 105,910 times.

To cut marble tiles with a wet saw, install a diamond blade on your saw with its teeth facing the cutting direction. With the new blade attached, fill the reservoir on the bottom of the machine with cold, clean water, as this will help cool the blade and reduce the amount of dust. You can keep your cut straight by placing the marble on your machine and adjusting the fence until the blade lines up with your mark. Once everything’s lined up, flip the tile over so the finished side faces the bottom of your saw, turn on your machine, and cut 1 inch into the marble. This relief cut will prevent the tile from chipping or breaking when you cut through it completely. After making the relief cut, flip the marble over and finish the cut, starting from the side that hasn’t been cut yet. For more help, like how to cut a curve with an angle grinder, read on!

How to Cut Ceramic Tile with a Grinder

If you are looking for how to cut ceramic tile with a grinder, you will need to use a diamond-tipped blade. Make sure to wear safety goggles and gloves while working with the grinder. First, mark the tile where you want to make your cut.

Then, position the blade on the tile and start the grinder. Apply gentle pressure as you move the blade across the tile. When you reach the end of your cut, turn off the grinder and check your work.

• Begin by marking the area on the tile that you wish to cut
• Use a pencil or other sharp object to score a line on the surface of the tile
• Next, set your grinder to the appropriate blade speed and depth for cutting ceramic tile
• Be sure to wear protective gloves and eye gear when operating the grinder
• Carefully guide the blade of the grinder along your scored line, applying light pressure as you go
• The goal is to make a shallow cut into the tile so that it can be easily snapped off later
• Once you’ve made your initial cut, use a pair of pliers or tile nipper to snap off any remaining pieces of tile from the main body

How to Cut Tiles With a Grinder Without Chipping

If you’re planning on doing some tile work, you’ll need to know how to cut tiles without chipping them. A grinder is the best tool for the job, but if you don’t use it correctly, you can easily damage your tiles. Here’s a step-by-step guide on how to cut tiles with a grinder without chipping:

Start by marking the tile where you want to make your cut. Use a pencil or chalk so that you can easily see your line.

Next, set up your grinder with a diamond blade. You want to make sure that the blade is rated for cutting ceramic or porcelain tile.

Before you start cutting, always test the blade on a scrap piece of tile first. This will help ensure that the blade is sharp enough and that it won’t chip your actual tile when you start cutting.

When you’re ready to start cutting, slowly lower the blade into the tile along your marked line. Keep the blade moving so that it doesn’t get too hot and cause any damage to the tile itself. If possible wear gloves while doing this step as well!

Let the weight of the grinder do most of the work – don’t apply too much pressure or force yourself as this could cause problems further down the line (literally). Just let gravity do its thing!

Also be sure not to move either forward or backward too quickly as this can also lead to chipping at different points along your cuts

Make sure to have water handy so that both yourself and your tools don’t overheat

And finally once completed take extra care while removing any debris created during grinding

By following these simple steps, you can avoid any potential mishaps and successfully cut tiles without fear of chipping them in the process!

How to Cut Ceramic Tile by Hand

If you’re planning a do-it-yourself tile job, you’ll need to know how to cut ceramic tile by hand. It’s not as difficult as it sounds, but there are a few things you need to know before you get started. Here’s a step-by-step guide to help you through the process.

Mark the tile where you want to make your cut. Use a pencil or pen so that the line is easy to see.

Score the tile along the line with a glass cutter or scoring tool. You’ll need to apply enough pressure to make a deep score, but be careful not to crack the tile.

Place the scored tile on a hard surface and snap it in two along the score line. If necessary, use pliers or clamps to help hold the tile while you’re snapping it.

Use a wet saw or handheld grinder fitted with a diamond blade to make any necessary cuts along the edges of your tiles (for example, if you’re cutting around an outlet). Make sure you wear eye protection when using power tools like this!

Tile Cutting Disc for Angle Grinder

If you’re looking for an easy way to cut tiles, then you need a tile-cutting disc for your angle grinder. This type of disc is specifically designed to make quick, clean cuts in ceramic and other types of tile. Plus, it’s much easier to use than a traditional wet saw.

To use a tile cutting disc, simply attach it to your angle grinder and guide it along the tile that you need to cut. It’s important to go slow and steady the disc so that you get a clean, even cut. When you’re finished, just disconnect the disc and remove any excess debris.

Tile cutting discs are available at most hardware stores or online retailers. start around 10, making them an affordable option for anyone who needs to do some tile work.

Cutting Porcelain Tile With an Angle Grinder Without Chipping

If you’re looking to do a porcelain tile job without chipping, an angle grinder is a way to go. Here’s a step-by-step guide on how to cut porcelain tile with an angle grinder without chipping:

Make sure you have a clear idea of where you need to make your cuts before you start. Use a ruler or a level to help you make straight lines.

Step 2: Set up your work area.

Cover any surfaces that might be damaged by flying shards of tile and put on safety goggles and gloves. You’ll also want to position the tile so that it’s easy to reach and comfortable to work on.

Step 3: Cut through the glaze.

The first thing you need to do is score through the glaze with your angle grinder. Apply gentle pressure and don’t try to cut all the way through in one pass—you’re just trying to create a weak spot that will make it easier to snap the tile later. Use a diamond blade for this step (and all future steps), as it will be able to handle the hardness of porcelain tile better than other types of blades.

How to Cut Ceramic Tile That is Already Installed

If you need to cut ceramic tile that is already installed, there are a few different ways that you can do it. One way is to use a wet saw. This is a specialized type of saw that uses water to cool the blade and prevent dust from getting into the air.

Wet saws can be rented from most home improvement stores. Another way to cut ceramic tile that is already installed is to use a scoring tool. This is a handheld tool that has a carbide tip that you use to score the surface of the tile.

Once you have scored the tile, you can then snap it along the score line. Scoring tools can also be found at most home improvement stores. yet another method for cutting ceramic tile involves using an abrasive wheel attached to a power drill.

This method will take some time and patience, but it will eventually get the job done. You’ll want to make sure that you’re wearing safety goggles and gloves when using this method so as not to injure yourself.

Can You Use a Grinder to Cut Ceramic Tile?

No, you cannot use a grinder to cut ceramic tile. Grinders are designed to abrasively cut through hard materials like metal and stone, but ceramic tile is too brittle and will shatter if you try to grind it. Instead, you need to use a wet saw with a diamond blade to score and cut the tile.

How Do You Stop Tile Chipping When Cutting With a Grinder?

If you’re working with ceramic tile, porcelain tile, or glass mosaic tile, a wet saw is the best tool for making clean, precise cuts. But sometimes you don’t have access to a wet saw and need to use a handheld grinder fitted with a diamond blade instead. Here are some tips on how to stop your tile from chipping when cutting it with a grinder:

Use a steady hand. When using a grinder, it’s important to keep your hand steady and move the tool slowly and evenly across the surface of the tile. If you try to rush the process or move the grinder too quickly, you’re more likely to end up with chipped or broken tiles.

Use sharp blades. It’s also important to make sure that your blades are nice and sharp before beginning to cut tile with a grinder. Dull blades will cause more friction and heat buildup, which can lead to chipping (or even shattering) your tiles as you cut them.

Make scoring cuts first. Another good tip is to make what’s called a “scoring cut” before actually starting to grind away at the tile surface. This involves running the blade along the surface of the tile in one quick pass without applying too much pressure; this will score/etch a line into the glaze which will help prevent cracking as you make your final cut along that line with more pressure applied.

Go slow and easy when finishing up.

What Blade Do I Need to Cut Tile With an Angle Grinder?

An angle grinder is a powerful tool that can be used to cut tile. However, it is important to choose the right blade for the job. There are several factors to consider when choosing a blade, including the type of tile, the thickness of the tile, and the desired finish.

The most common type of tile is ceramic tile. Ceramic tiles come in a variety of thicknesses, but the most common are 1/4″ and 1/2″. For cutting ceramic tile with an angle grinder, you will need a blade with a diamond tip.

Diamond blades are available in a variety of sizes, so you will need to select one based on the size of your angle grinder. The most common sizes are 4″ and 5″. When cutting thicker tiles (1/2″ or greater), it is best to use a wet saw.

Wet saws use water to cool the diamond blade and prevent overheating. If you do not have access to a wet saw, you can still cut thick tiles with an angle grinder by using a dry-cut diamond blade. Dry-cut blades do not require water for cooling and can be used with any type of angle grinder.

However, they will create more dust than wet-cut blades and should only be used if absolutely necessary. No matter which type of blade you use, always wear eye protection and gloves when cutting tile with an angle grinder.

What is the Easiest Way to Cut Ceramic Tile?

Ceramic tile is a popular choice for floors and walls, but it can be difficult to cut. There are several ways to cut ceramic tile, but some are easier than others. The easiest way to cut ceramic tile is with a wet saw.

Wet saws are designed specifically for cutting tile and have a water-cooled blade that helps to prevent the tile from cracking or breaking. You can rent a wet saw from most hardware stores or home improvement centers. Another option is to use a scoring tool to score the tile before breaking it along the scored line.

This method works best with smaller tiles or if you need to make curved cuts. You will need a glass cutter or carbide-tipped pencil for this method. If you don’t have access to either of these tools, you can try using a masonry bit in a drill, but this method is more likely to break the tile so it’s not recommended unless you’re experienced with drilling into ceramic material.

Conclusion

Ceramic tile is a beautiful and durable flooring option, but it can be tricky to install. One of the most challenging aspects of working with ceramic tile is cutting it to size. A grinder is one of the best tools for making precision cuts in ceramic tile.

In this article, we’ll show you how to use a grinder to cut ceramic tiles. First, mark the area where you need to make your cut. Then, set your grinder to the appropriate speed and position the blade on the tile.

Apply gentle pressure as you move the blade across the surface of the tile. Be sure to keep your hands well away from the blade while it’s in motion. Once you’ve made your cut, clean up any debris from the work area and check your edges for smoothness.

With a little practice, you’ll be able to make precise cuts in ceramic tile like a pro!

How to Cut Mexican Tile

It’s very easy to cut Mexican tile. To put it another way, it’s one of the easiest tiles you’ll ever cut in your career.

Soft and Absorbent

Mexican tile is not hard because it was fired at a lower temperature and for a shorter amount of time while it was in the kiln.

The tile starts out as a wet clay and heat transforms it into a soft stone.

The softness of the tile allows it to soak up water. On the negative side, you’d never want to use Mexican tile where the temperature drops below 32F. Water in the tile will freeze, expand and cause the tile to surface spall.

Cut Mexican Tile With an Angle Grinder

An inexpensive angle grinder is the best tool to cut Mexican tile. You can use a wet saw if you have access to one, but they are very expensive to rent.

Be sure the grinder has a dry diamond blade. This blade will cut through the tile like a hot knife through butter.

This is a great but inexpensive angle grinder. Put in a dry diamond blade and you can cut away grout in seconds. CLICK THE PHOTO NOW to have this grinder delivered to your door.

Cutting Circles In Tile

It’s very easy to cut a curve with the angle grinder. A small-diameter blade allows you to cut a curve.

To cut tighter curves, don’t bury the blade into the tile. Make shallow passes and enlarge the cut line on the outside of the curve where it doesn’t matter.

Dust Control Is Important!

It’s important to realize you’ll be creating lots of dust if you use the angle grinder and dry-diamond blade. Stay upwind of the cutting area if it’s windy. If no wind, consider using a large fan to blow dust away from you and the grinder.

The Mexican tile will probably have silica in it and it’s not a great idea to breath lots and lots of dust that contains silica.

Here’s a dust mask that works quite well:

Be sure any dust mask you get says it’s approved for silica. CLICK THIS PHOTO NOW to have this mask and filters delivered to your door.

Which Angle Grinder Disc For Tiles? | Things You Should Know

Ann Hutchinson is the heart of the team, senior editor and our Head of Product Reviews which means she sets the testing parameters of each group review ensuring that tests resemble everyday use.

There are different types of angle grinder discs, such as diamond-tipped, serrated blades, etc., which can be used for tile cutting. However, choosing the right one for the purpose will mainly depend on the tile material.

Picture this: you need to resize a few tiles for your DIY kitchen or bathroom renovation, but buying a wet saw is too expensive an option. You ask a friend for help, who hands you an angle grinder. Sounds weird, right?

But angle grinders can help you with tile cutting, provided you have the right disc attachment for the tile material. And in the following sections, we will tell you all about how to choose it.

What Is An Angle Grinder After All?

• 1. Stone Cutting Disc
• 2. Steel Disc
• 3. Continuous Dry Cutting Discs
• 4. Diamond Tile Saw Blades
• 5. Serrated Blades
• 6. Carbide-Tipped Blades
• 7. Abrasive Wheels

• 1. Adust 4.5-Inch Diamond Tile Blade
• 2. Casaverde 4.5-Inch Super Thin Blade
• 3. Rok 4 ½-Inch Diamond Saw Blade Set

• 1. Size
• 2. Shape

• The Preparation
• Step 1
• Step 2
• Step 3

An angle grinder is a power tool that can be either corded or cordless (battery-powered), typically used for cutting, smoothing rough edges, grinding, and finishing metals. It’s equipped with a rotating abrasive disc, which performs all these tasks.

And as you may have already figured out, there are different types of discs, depending on the type of material you want to work with. We will talk about them in a later section.

Used for both residential and commercial purposes, angle grinders come in handy for different tasks, including:

• Sharpening gardening mower and shear blades
• Deburring steel frames
• Cutting protruding metal pieces
• Cutting ceramic, natural stone, and porcelain tiles

Which Angle Grinder Should You Use For Cutting Tiles?

Although angle grinders may not be the perfect tool for cutting tiles, the good news is they do the job pretty well. over, there are different discs available for the job, which we’ve listed below.

Stone Cutting Disc

Stone discs or blades are the most affordable choice, suitable for users who don’t really need a lot of precision while cutting tiles. These discs make thick cuts and generate a lot of dust, so you should always use them outdoors and wear proper protective gear to protect your eyes and nose.

Another thing to note is that a stone grinding disc isn’t very durable either, so you need to constantly keep an eye on it. The moment you notice the blade chipping, replace it with a new one.

Steel Disc

A steel disc is undoubtedly one of the most reliable options to achieve satisfactorily clean cuts, thanks to the diamond coating on it. In other words, a steel blade is essentially a diamond-tipped blade that can take on heavy-duty tile cutting.

These discs make it easier to make both curved and straight cuts on tiles without straining your nerves too much. Although they are more durable than their stone counterparts, their lifespan will ultimately depend on the intensity and frequency of the cutting.

Continuous Dry Cutting Discs

Another option in the diamond-tipped category is the continuous dry-cutting disc, which is a solid disc best suited for edging the tiles with straight cutting. A pro tip- wet the tile with a spray gun from time to time to help the blade cool down and prevent it from overworking.

Diamond Tile Saw Blades

As the name may have already suggested, diamond saw blades can cut through tiles made from glass, ceramic, natural stone, porcelain, granite, etc. In fact, the best diamond tile saw blades are extremely sharp to provide the smoothest of cuts without chipping.

Many users who use angle grinders for cutting ceramic tiles (or any other type, for that matter) consider these blades to be the best, as they can cut even the toughest tile. But these high-power blades tend to be more expensive than the other types.

Furthermore, diamond saw blades can be categorized into dry and wet blades. While the former can work on dry surfaces, the latter will require the surface to be sprayed down with water at regular intervals. This helps to cool their core, making them perform longer without any significant issues when used properly.

Serrated Blades

If you aren’t particularly looking for a smooth cut on your tiles, then a serrated blade is a good option to go for. But that’s not the only advantage it provides, as serrated blades are extremely helpful when it comes to cutting concrete tiles.

Likewise, they are a preferred choice for cutting tiles made of materials like natural stone, which are harder than their ceramic counterparts.

Carbide-Tipped Blades

These blades offer you a decent mix of price and performance, as they generate satisfactory cutting power without burning a hole in your

Abrasive Wheels

Abrasive wheels are perhaps the cheapest option out there; however, the low price comes at the cost of low durability. But one benefit of these blades is they are compatible with most materials.

Best Angle Grinder Discs On The Market Right Now

Now that you have a fair idea about the different types of angle grinder discs, let us quickly take you through some of the best models on the market. You will see that all of them come under the diamond blade category, as most professionals recommend this type for cutting ceramic tile with the best results.

Adust 4.5-Inch Diamond Tile Blade

First up is the Adust 4.5-inch diamond tile blade, which is a preferred choice for cutting porcelain tiles. However, it also works well for ceramic, slate, marble, and other types of natural stone tiles. With a super thin turbo mesh rim and X-tooth design, it can provide faster and cleaner cuts with minimal chipping for your bathroom or kitchen tiles.

over, it weighs a little more than 12 ounces, so you can rest assured that it won’t add much to the overall weight of your angle grinder. It’s also one of the most durable options on the market today for both professionals and DIYers.

Casaverde 4.5-Inch Super Thin Blade

Yet another angle grinder blade that’s worth considering is this unit from Casaverde, which offers chip-free cuts even on the toughest tiles. It facilitates dry and wet cutting alike, and a special heat-treat function keeps the temperature down when dry cutting for longer periods.

Users have liked how this unit is compatible with different materials like reinforced concrete and metals without compromising on a smooth finish. And if you’re wondering what angle grinder disc for wood will work best, then this unit can be a suitable answer to that, too.

Rok 4 ½-Inch Diamond Saw Blade Set

For people who may want to get their hands on a cost-effective blade set, Rok has got the perfect solution. According to the brand, this pack of 3 blades is suitable for making straight as well as angle cuts on varied materials, including granite, marble, ceramics, and concrete.

Each unit is equipped with a 1-inch turbo cutting rim that takes care of speed and precision, no matter if it’s a wet or dry cutting job. However, some users complain that the blades may not be very effective for longer cutting tasks.

Some Other Tips To Choose The Right Tile Cutting Blade

Size

Aside from the type of blade, you should consider the size (diameter) of the blade, as a bigger blade will easily cut more surface in one go.

Shape

Grinder blades come in different shapes, with square, rectangle, and segmented variants being the most commonly used ones. And each one brings different benefits and some drawbacks. For instance, squared-shaped tiles make it easier to perform straight cuts, but they may not be very useful for making curved cuts.

Rectangular blades, on the other hand, can be the perfect bet to make long, uninterrupted cuts, thanks to their larger surface area. However, they don’t score very high in terms of precision.

How To Use An Angle Grinder For Cutting Tiles?

The Preparation

Before starting with the job, ensure that you have the right tool and blade for the purpose.

For the unversed, angle grinders come in different variations, but the electric-powered ones are more popular, especially for standard DIY tile cutting and similar tasks. This is mainly because they can cover a larger area without requiring too much effort from the user.

Electric angle grinders are further divided into corded and cordless models, and you can choose one according to your needs and budget.

As for the tile cutter blade, it should be picked according to the material you will be working with. While a diamond-tipped blade with a smooth edge is considered most suitable to cut ceramic tiles, you can achieve cleaner cuts with notched blades for porcelain tiles.

After this is done, the next important thing is to wear adequate safety gear like work gloves, safety goggles, and a dust mask. Otherwise, you will expose yourself to injuries from the moving blade and flying debris from the tiles.

You can also use a pair of earplugs, as tile cutting generally produces a lot of noise, irrespective of the material. And now that the preparation is over, it’s time to get down to business!

Step 1

Start by securing the ceramic or porcelain tile to the work surface using clamps so that it doesn’t move through the cutting process. Dedicate adequate time to this step; otherwise, you will invariably risk injuring yourself, damaging the workspace, and messing up the cut itself.

Step 2

Once you’re sure that the tile is properly secured on the work surface, draw an outline of the cut on the tile. And if you haven’t measured the area where the tile is to be set, this is the time to do it, as you need to cut the tile according to that measurement.

Depending on your needs, the cut outline can be of any shape, but always ensure that its perimeter is protected with mask tape to prevent chipping from the edges.

Step 3

Begin cutting the tile by holding the grinder at an angle most suitable for the cut. Straight cuts are better achieved by keeping the blade straight while making curves will require you to hold the tool at an angle. In fact, an angle grinder can perform better than a wet saw when it comes to angled cuts.

Keeping the blade vertically along the marked area will help you cut directly into the surface of the tile. On the other hand, a horizontal blade movement that’s kept flush with the outline facilitates making rounded cuts with better precision. In hindsight, you shape the tile by cutting away smaller bits at one go rather than cutting into the surface directly.

Similarly, the pressure applied for the cut will largely depend on the thickness of the material. Thicker materials will obviously need more pressure, which is not the case with thinner materials.

We’d suggest starting with moderate pressure, as you can increase it gradually. Too much force from the get-go can mess up the cut, and you won’t get the chance to rectify it.

using a angle grinder to cut ceramic tiles

Continue cutting until the tile has the desired shape and size.

Angle Grinder Disc For Tiles Conclusion

So, which is the best angle grinder blade for cutting tiles?

Well, the answer to that will depend on the type of tile you’re working with. And if you’re still unsure, refer to the instructions of the manufacturer of the blades.

With that, it’s time for us to say goodbye, but not without a final pro tip: some tiles are prone to chipping and breakage from the vibration of the blade. So, use the angle grinder tools to tighten the blade properly, thereby minimizing the vibration.

If you want to know more about angle grinders, refer to our other read on ” See you again!