Metabo 5 inch grinder. Metabo 5 inch grinder
Metabo 5 inch grinder
5″ Pro Grinder Package | Metabo WEV15-125 Quick HT
Part Number: SX65000EC
The 5″ Concrete Grinder comes equipped with Metabo WEV15-125 Quick HT Grinder (13.5 Amp, 2,800-9,600 RPM), Convertible Hub Shroud, 4.5″ 9 Seg Turbo Cup Wheel.
5″ HD Metabo Hand-Held Metabo Concrete Grinder
Part Number: SX65000EC
The 5″ Metabo Concrete Grinder Package comes equipped with 5″ Metabo WEV15-125 Grinder. Convertible HUB Shroud, and 4.5″ 9 Segment Turbo Cup Wheel.
The rugged polyurethane dust shroud enables the grinder to be connected to a dust collection system for a more productive, comfortable work environment.
- Hand-held concrete grinder units that are great for smaller jobs or in combination with walk-behind grinders on larger projects
- Use on concrete for cleaning, leveling high spots or uneven floor surfaces,removing glues,mastic, epoxies and other coatings
- May be connected to a variety of dust collection systems for dust containment
- The units polyurethane dust shroud is long lasting and is offered in full shrouds and convertible models that flip up to allow for edge work along walls
- System includes Metabo WEV15-125, dust shroud (convertible), and 9 segment turbo cup wheel
Metabo 5 inch grinder
New Metabo large angle grinders include mechanical brakes that stop the wheel within 2-1/2″ seconds of releasing the trigger. Metabo is the first to release large angle grinders with a safety brake. These new large format grinders are available in 7-inch and 9-inch models. Two 7-inch models and one 9-inch model, all made in Germany.
This new line of grinders will all include the 15 Amp high-torque motors with electronic overload protection. An LED warning light alerts the user when it senses overload, mitigating motor failure, and prolonging the tool’s life. The 7-inch models will have a no-load speed of 8,500 RPM, while the 9-inch model has a no-load speed of 6,600 RPM. Metabo included their MVT vibration dampened handle the aids in ergonomics when cutting and grinding.
Metabo Large Angle Grinders with Safety Brake
If you’re in any trade that includes metalworking, then you’re probably aware that Metabo makes some of the best angle grinders. They introduced the first safety clutch back in the 1960s that keeps a pinched blade from flying apart. Some of that same technology is still used today.
“Safety is an integral part of Metabo’s philosophy, so introducing these large grinders with safety brakes was just a natural progression. They complete our lineup of 4-1/2”, 5” and 6” safety grinders, corded and cordless”, said Terry Tuerk, Metabo’s Senior Product Manager.
In addition to the mechanical safety brake, these new Metabo large angle grinders also include a non-locking paddle-switch and an electronic clutch. A tool-free adjustable guard allows the user to shift the guard in seconds for the optimum position. All three grinders also include soft-start technology to ramp-up the grinding wheel to speed.
New Metabo Grinder Models
For more information check out Metabo USA.
Having a love of automobiles that stems from his father’s racing days, Tim has spent a lifetime around cars and trucks. From restoring and renovating them as well as fixing them when they break, Tim always has a tool handy. He currently resides in central Florida with his wife and 5 kids where he divides his time as mentor, devoted father, loving husband and jungle gym.
Metabo 5” Tuck-Point Angle Grinder W12-125HD ASR 35 ACP HEPA Vacuum
Another overview with Josh from the Metabo truck. This time he gives us a brief over view of the Metabo 5″ W12-25HD Tuck Pointing Angle Grinder (600408690) and 35 ACP HEPA All-Purpose Vac (US602057800).
The Metabo Tuck Point Grinder was created by Tuck Pointers. That seems to be a Smart move. The FOCUS was to provide what was needed, such as ease of use, being able to see the wheel and a arrow pointing which way to go as Josh explained, “You’d be surprised how many guys go the wrong way.” Can’t go wrong with this Grinder at only 299.
|Rated input power||1250 W|
|Output power||740 W|
|No-load speed||9600 RPM|
|Revolutions at rated load||8800 RPM|
|Spindle thread||M 14|
|Weight (without power cable)||9.7 lbs|
|Cable length||13 ft|
|Surface grinding||5.5 m/s²|
|Uncertainty of measurement||K1.5 m/s²|
|Grinding with sandpaper||2.6 m/s²|
|Uncertainty of measurement||K1.5 m/s²|
Onward to the 599 Metabo 35 ACP HEPA All-Purpose Vac (US602057800). The biggest feature this vac has to offer, separates itself from the competition, and that is the “Mechanical Cleaning” device. It doesn’t reverse airflow to clean the filter, instead, shakes the filter from side to clean one side at a time, only when the filter needs cleaned. Filters can be cleaned using water and Metabo suggests only cleaning it this way up to 3 times.
You’ll find an outlet located on the front of this vac, and that is used to connect your corded tool to the vac so when you switch on the tool, the vac powers up, switch the tool off, the vac shuts down (with a delay). Also located on the front, 2 dials, one controls the on/off and the other “Current Control”. You have four options, IR, AR, O, I.
- IR: The vac is running and ready for operation with mechanical cleaning activated.
- AR: Vac is operational only when the tool is plugged into the outlet and powered on.
- I: Vac is powered on but without mechanical cleaning.
- O: Powered Off.
Current Control allows the adjustment of amperage the vac is pushing. Just remember, less amperage means less CFM. You also have 130 CFM to play with, so you can make it work if you need to lower a bit.
|Air output max.||130 CFM|
|Filter surface||1333 sq.inch|
|Input power max.||1400 W|
|Container volume||9 gal|
|Suction hose||1 3/8 “|
|Hose length||10 ft|
|Cable length||26 ft|
The Grinder and Vac are available at Ohio Power Tool.
Rely on a quality angle grinder for cutting, grinding, carving, and a host of other tasks.
By Timothy Dale and Tom Scalisi | Updated May 20, 2022 11:08 AM
We may earn revenue from the products available on this page and participate in affiliate programs.
Angle grinders are versatile power tools that can handle a variety of projects, such as cutting iron pipe to replace a faulty valve, carving wood to craft furniture, cutting tile for a backsplash, and removing grout from between tiles.
Interchangeable rotating discs—some made for cutting and others with an abrasive edge for grinding—can be swapped out based on the application. For safety, a guard sits between the disc and the handle to protect the operator.
If you’re ready to add this tool to your collection, read on for more on its capabilities and what to look for in the best angle grinder. Each of the top picks below was selected after an in-depth review of the market and thorough product vetting.
- BEST OVERALL:Makita XAG04Z 18V LXT Cordless Cut-Off/Angle Grinder
- BEST BUDGET:Metabo HPT 4.5-in 6.2-Amp Angle Grinder
- UPGRADE PICK:DeWALT 20V MAX XR Brushless Cut Off/Grinder
- BEST CORDED:Porter-Cable Angle Grinder Tool, 4-1/2-Inch (PC750AG)
- BEST LIGHT-DUTY:Black Decker Angle Grinder Tool, 4-1/2-Inch (BDEG400)
- BEST HEAVY-DUTY:DeWALT Angle Grinder Tool, 4-1/2-Inch (DWE402)
What to Consider When Choosing the Best Angle Grinder
There are a few things to understand before clicking “add to cart” on just any old angle grinder. The best angle grinders may have unique features, different power sources, and some might simply be better suited to particulars. The following points are worth considering when shopping for a good quality grinder.
Angle grinders come in sizes, denoted by a number that refers to the maximum diameter of the grinding wheel or disc it will handle. For most DIY projects, a 4-, 4.5-, or 5-inch disc will suffice. In fact, these compact sizes and weights are ideal for DIYers, as larger discs can become unwieldy or tedious to work with.
Larger discs (up to 9 inches) are more commonly used in industrial situations by professionals cutting through thick pieces of material. As the disc gets larger, the grinder itself must be larger to handle the cutting strength. This translates to a heavier tool that’s likely to cause hand fatigue sooner than using a small angle grinder.
Angle grinders are available as corded models (which plug into an electrical outlet) and cordless (which use a battery).
- Corded grinders typically generate more power at a consistent level due to the direct connection to the outlet. But corded models restrict the user to a physical location, limiting range without an extension cord. The cords can also be a tripping hazard and, therefore, a nuisance while working on a project.
- Typically, cordless grinders lack the sheer power of their corded counterparts. And functionality depends on battery capacity, so a dead battery could mean downtime in the middle of the project. On the plus side, cordless angle grinders offer hassle-free mobility and are better for use in tight spaces.
Angle grinder speed is measured in revolutions per minute (rpm). Speeds typically range between 5,000 and 10,000 rpm, though some very robust grinders reach up to 12,000 rpm. Keep in mind, however, that the rpm rating is under “no-load” conditions, meaning that the disc isn’t cutting or grinding anything, just spinning in the air. Once the disc is cutting or grinding, that speed will lower considerably.
Obviously, the higher the rpm, the easier and more quickly the tool can cut through the target material. But the disc also becomes hotter at higher speeds and could be vulnerable to rupture—an injury risk. Be sure to use the correct disc for the task, and note the maximum supported speed marked on the disc. For example, a disc rated at 7,500 rpm that is running faster can break under the force, sending shards of the grinder wheel flying.
Angle grinders measure power output potential in volts (V) and amperes (amps). Cordless angle grinders use volts to measure the power available from their battery, with most cordless models using 18-volt or 20-volt batteries and outliers ranging from 7.5 volts to 24 volts. The “magic number” in most cordless power tools is 18 volts to 20 volts, offering the best mix of affordability and functionality.
Voltage readings on corded angle grinders only indicate whether they can be used with 120-volt or 220-volt power outlets. Shoppers can assess the power output potential of corded models by checking amperage, which ranges from 5 amps to 15 amps. Larger discs will require a larger output, so for a 7- or 9-inch grinder, expect it to have a higher power output potential.
The guard on an angle grinder is a crucial safety measure that covers half the disc. Its purpose is to protect the user’s hands, by preventing sparks and debris from flying toward the user, and to protect surfaces from damage when using the grinder in tight spaces.
Some angle grinders have a movable guard, and others have a fixed guard. The movable option is more popular as it allows for left-handed or right-handed use and can adjust to better protect the user from flying debris. If left untightened, however, a movable guard can fall off the unit. Fixed guards are more robust, and there’s no risk of them coming off a grinder.
Because angle grinders are fast, powerful tools, they can recoil a bit upon power-up. This is particularly true if the grinding wheel is large and heavy. The recoil from the motor can result in the angle grinder jumping in the user’s hands, potentially causing serious injury.
To combat recoil, soft-start technology reduces the power output to the motor at first, slowly increasing until the angle grinder is fully up to speed. This throttled control over the power output prevents an angle grinder from recoiling during start-up, increasing safety while also reducing the jolt to the user’s arms and wrists.
Tips for Buying and Using an Angle Grinder
Keep these tips in mind when choosing and using an angle grinder.
- The most common DIY projects where an angle grinder will be of use—such as cutting tile or pipe, metalworking, or removing grout and mortar—rarely require more than a 4.5-inch grinder.
- The ongoing vibration of an angle grinder can cause what is known as Hand-Arm Vibration Syndrome (HAVS), with symptoms including pain and cold sensations in the user’s fingers, loss of grip strength, and a loss of sensation in the fingers and hands. An angle grinder with cushioned or vibration absorbent material on the grip can protect hands from ongoing vibration.
- Always wear personal protective equipment (PPE) including safety glasses/goggles, hearing protection, and respiratory protection when grinding.
- Check the grinder before use to ensure the disc and guard are properly attached and tightened. Discs and guards can become loose between uses. Tighten them before connecting the power to the angle grinder.
Our Top Picks
While all that information on the best angle grinders ought to be helpful when shopping, there’s really no substitute for hands-on testing. Tom had the pleasure of personally putting all the following angle grinders through their paces during a recent metalworking project.
Each of the models reviewed passed our tests and met our standards (see “How We Tested,” below), though Tom found some models better for specific tasks than others. Note that all of the following models feature movable guards and screw-in handles.
Makita XAG04Z 18V LXT Cordless Cut-Off/Angle Grinder
The Makita XAG04Z is worth checking out by anyone looking for the best cordless angle grinder performance. This top-rated angle grinder features an 8,500 rpm top speed thanks to its brushless motor and the 18-volt lithium-ion battery. It can handle 4.5- and 5-inch discs.
We found the XAG04Z excellent to work with. While it doesn’t boast the highest top speed, the automatic speed adjustment enabled it to maintain speed during tough cuts and grinds. We noticed very little vibration thanks to the rubber over-molded grip and handle, and the lock-on switch proved to be a huge plus.
The only downsides I see: Assembling the two-piece handguard was a little awkward, and it would be nice if the tool came with a battery and a charger.
- Automatically adjusts speed and torque settings
- Slow start keeps the tool from jumping
- Lock-on switch
- Very little noticeable vibration
Get the Makita angle grinder at Amazon, Walmart, The Home Depot, and Ace Hardware.
Metabo HPT 4.5-in 6.2-Amp Angle Grinder
When it comes to DIY projects and budgets, not everyone can afford top-of-the-line tools every time. So those hoping to save cash and still get a quality grinder may want to give this corded model from Metabo HPT a look. It uses 4.5-inch discs, has a 6.2-amp motor, and spins at up to 10,000 rpm.
This is one of the best 4.5 inch angle grinder options for the money, and the Metabo HPT’s usefulness was somewhat of a surprise. I enjoyed how compact and lightweight it was in my hand. The location of the power switch is very convenient, especially during cutting.
The lock-on feature allowed me to kick it on and leave it on—very helpful in my project. My only complaint is that the Metabo HPT lacks the power of other corded models, and the 6.2-amp motor seemed like it could overheat during all-day use.
- Lock-on switch for long use
- Lightweight angle grinder (only 4 pounds)
- The most compact of all the grinders tested
- A little lacking in power compared to other corded models
- The 6.2-amp motor isn’t ideal for all-day use
Get the Metabo angle grinder on Amazon and at Lowe’s.
DeWALT 20V MAX XR Brushless Cut Off/Grinder
DeWALT’s 20V Max XR Brushless Cut-Off/Grinder cordless angle grinder could be the ultimate upgrade for pros and DIYers who take their tools seriously. This cordless model utilizes the brand’s 20-volt Max XR lineup, and its brushless motor spins 4.5-inch discs up to 9,000 rpm.
My experience with this DeWALT model was just as I expected: great portability and truly outstanding power. It made short work of cutting and grinding, without a cord to get in the way. The grip and handle both feature thick rubber, keeping vibration and fatigue to a minimum.
The safety features are certainly a plus: The electronic brake stopped the disc within 2 seconds (other models can take up to 10 seconds), and simply knowing that there is a kickback brake instilled confidence.
- Safety includes two-stage trigger, electronic brake, and kickback brake
- Excellent ergonomics and anti-vibration
- Plenty of power
Get the DeWALT angle grinder at Amazon, Walmart, and Lowe’s. Check for a refurbished DeWALT on Amazon.
Porter-Cable Angle Grinder Tool, 4-1/2-Inch (PC750AG)
This Porter-Cable product is one of the top corded angle grinder options for dependable power. This model features a heavy-duty 7.5-amp motor that spins a 4.5-inch disc at speeds up to 10,000 rpm, providing plenty of speed and power for workshop use.
The Porter-Cable grinder felt truly in its element on my metalworking project, handling cuts and grinds nicely. While it doesn’t have the most power compared to others on our list, it’s pretty close. It’s also one of the only grinders to feature a traditional trigger switch, which I felt was easy to use and more intuitive than most. I also really liked the top-mount position for the handle attachment, as it can make cutting much more manageable.
The one negative worth mentioning is that vibration control isn’t top-tier, so although it can take all-day use, the user’s hands and wrists might tire.
- Top-mounted handle position
- Comfortable trigger switch
- The 7.5-amp motor has plenty of power
Get the Porter-Cable angle grinder at Amazon, Walmart, and Lowe’s.
Black Decker Angle Grinder Tool, 4-1/2-Inch
If you’re searching for the best angle grinder for wood carving, sanding, grout removal, and other light-duty projects, Black Decker’s Angle Grinder Tool might be a wise choice. This affordable model features a 6-amp motor that produces up to 10,000 rpm of speed, and it’s compatible with 4.5-inch grinding and cutting wheels.
Black Decker markets this model at light-duty, DIY-type users, and that’s where it excels. This very affordable model is easy to use, thanks in part to its lock-on trigger. The three-position handle mounting system works for plenty of scenarios, such as cutting and grinding at unusual angles. Just don’t expect the Black Decker to handle heavy-duty jobs like large metalworking projects for any length of time, as it only has a 6-amp motor.
- Plenty of capability for the price
- Three-position handle, including top-mount
- Trigger locks into position
Get the Black Decker angle grinder at Amazon, Walmart, The Home Depot, Lowe’s, and Ace Hardware. Check for a refurbished Black Decker on Amazon.
DeWALT Angle Grinder Tool, 4-1/2-Inch (DWE402)
Heavy-duty projects like production welding and cutting require a grinder that can keep up, and DeWALT’s DWE402 can handle the job. This burly machine features an 11-amp motor and spins 4.5-inch grinding and cutting wheels at speeds up to 11,000 rpm.
I found the DWE402 to be the ideal grinder for my work, though not everyone will need its power and high-speed capabilities. It cut through angle iron faster than any other grinder, and it made short work of my large, lumpy, amateur-grade welds (though it’s definitely a pro-grade tool, and the speed-boosting button on the handle base helped a lot).
While this is one of the best variable speed angle grinders, neither the DWE402’s vibration control nor its grip got much attention on the drawing board.
- Pro-grade capability
- Very fast and powerful
- High amperage motor for heavy-duty work
Get the DeWALT angle grinder at Amazon, Walmart, and Lowe’s.
With portability and power in mind, the Makita XAG04Z is a great choice for almost any home workshop, though pros may also appreciate this model. And for those who need the best angle grinder for cutting metal and other heavy-duty weld materials, the DeWALT DWE402 has the power and speed to match.
How We Tested the Best Angle Grinders
Sometimes, I have the best job in the world. I’ve had a project on my plate for months now (building a welding cart), and it just so happened to be the ideal project to test these top angle grinders. I used the same set of cutting and grinding wheels for each model to make apples-to-apples comparisons.
I used each grinder to cut through angle iron, switching grinders between each cut until I felt comfortable with the strengths and weaknesses of each model. I recorded myself cutting all the pieces for the welding cart in order to determine how long each cut took and how easy it was to use. After cutting all the pieces, I welded the cart together (rather heavy-handedly, I admit, as it’s been a few years since I last welded).
With those big, burly welds to address, I used each grinder to knock them down to flush. Again, I noted ease of use and handling. In the end, I had all I needed for these honest angle grinder reviews—as well as a cart for my new welder.
Shopping for a Used or Refurbished Angle Grinder
Historically, most people would baulk at the idea of spending good money on a used or second hand tool, but today’s refurbished models are not the dubious equipment found at a neighborhood yard sale. For some time, reputable manufacturers and retailers have been offering refurbished or renewed products like angle grinders alongside new models.
The idea is that when a commercially viable fix is possible, it cuts down on waste—which is always a good thing. It may also offer buyers the opportunity to acquire products that might otherwise be outside their budget.
These should not be tools that have been beaten to death for 364 days and returned on the day the warranty expires. It’s true that often they have been tried by another buyer but will have been returned within a relatively short return window. Other times, they might be tools damaged in transit or in the warehouse.
So are refurbished angle grinders any good? In our opinion, yes. There’s every chance they could represent a real bargain. There are some interesting offers on refurbished or renewed angle grinders at Amazon and Walmart among others. However, care and common sense is needed.
- Specify the type of angle grinder you want first. Look at new models. Then see what you can get on the refurbished market that comes close to those specifications.
- Keep a tight rein on your budget. It’s easy to get carried away. The idea here is to save money, or get better value.
- You should be looking for a substantial cost reduction. If the saving is only saving 10 percent or 15 percent, it might be better to buy new. Make sure you know exactly what is included. Cordless tools often won’t include battery or charger, for example.
- Be sure to check warranty and return periods before you order. Don’t make assumptions, even if you bought from the retailer before.
While refurbished, reconditioned, or renewed tools are often excellent, there’s always a chance it could be a dud. Buy from a reputable source. Check the angle grinder as soon as it arrives so you can get your money back if there’s a problem.
Even with ample background on the best angle grinders, you might have some additional questions. Here, we answer some of the most common queries about angle grinders, so check for the info you need below.
Q: What kind of tasks can I use an angle grinder for?
The most common uses for angle grinders are metal grinding and cutting, such as steel for welding or metal piping. However, they’re also useful for wood carving, refinishing, and other projects. Some farriers even use them to trim hooves.
Q: How does an angle grinder operate?
After attaching the correct disc for the job, hold the angle grinder in two hands for safety and security (the tool’s initial torque will cause it to jump). Push the trigger down or hit the power switch, and the disc will start rotating. Move the grinder until the rotating disc contacts the material you want to cut or grind.
When finished, release the trigger or switch off the power button and wait for the disc to stop rotating completely before placing it in a safe location, keeping in mind that the disc is still hot due to the friction caused during operation. Unplug the power cord or detach the battery and allow the tool to cool down.
Q: How much does an angle grinder cost?
An angle grinder can range in price from just 30 to over 200, though it’s more common for these tools to cost about 80 to 100.
Q: How do you cut metal with an angle grinder?
Use a metal cutting disc on an angle grinder to cut through lead, iron, copper, and other metals without a problem. The rotating blade slices easily through metal, but it’s important to wear safety glasses and gloves because a significant amount of sparks are produced during the grinding process.
Q: How do you cut pavers with an angle grinder?
Angle grinder equipped with masonry discs can be used to cut through paving stones without much difficulty. Measure and mark where you want to cut the paver, then position it on a workbench. Turn the grinder on and start to slowly cut into the paving stone. Once you have started the cut it will be easier to accurately finish cutting through the paver.
Q: How are the discs on an angle grinder changed?
First, unplug the grinder or remove the battery. Then remove the nut that holds the disc in place, using the factory spanner included with the angle grinder. Replace the disc and tighten the nut bolt using the factory spanner.
Q: How can I remove the disc with vise grips?
Grinder discs are secured with a specialized nut that is usually tightened or removed with an included spanner. However, if you lose the spanner the nut can still be removed with a set of vise grips. Simply tighten the vice on the grinder blade, locking it in position, then use your hand or a screwdriver to turn and remove the locking nut.
Q: How do you properly recycle an old angle grinder?
Instead of tossing your old angle grinder in the trash, take it to a local electronics recycling location. Typically, the municipality or town will have a program for recycling electronic tools and other devices, though some home improvement stores, like Home Depot, also offer tool recycling programs.