Moving Tips. Ride on mower ramp

Moving Tips

There’s a good chance that you haven’t had to move your lawn mower since the day you bought it from the store. Do you happen to remember how well it was packed and secured on the day of the purchase?

The bad news is that you can’t just pack your lawn mower in bubble wrap and fit it inside a moving box. The good news is that transporting a lawn mower to a new home is not overly complicated – you just need to follow a few precautionary measures and, with a few simple packing and moving tips, you’ll have your piece of lawn equipment moved between the two homes in no time.

Read on to learn how to pack and move your lawn mower, including the best way to move a riding lawn mower when moving house.

How to prepare a lawn mower for moving

You can’t just load your lawn mower into a moving truck the way you left it right after you last worked with it. And you shouldn’t do it either for a number of safety reasons.

Before you can load a lawn mower into a moving truck, you’re going to need to prepare it properly for safe transportation.

Here are 4 simple steps to preparing a lawn mower for a move:

Step 1. Drain all liquids from the lawn mower

The very first thing you need to do when moving a lawn mower is to drain completely its gas tank and its oil tank and transfer those liquids into appropriate containers.

Gas and oil are hazardous materials that top the list of non-allowable items when moving home. And as you know well, professional movers cannot and will not transport dangerous items of any kind.

If you’re transporting your lawn mower on your own with a pick-up truck, a rental van or a trailer, then you also must make sure no gas or oil remains in your lawn care equipment. Gas is extremely combustible, especially when exposed to heat during a summer move, for example. Oil may leak out and make a huge mess inside the back of a moving vehicle.

Dispose of the lawn mower liquids in accordance with the local environmental regulations. Or you can give them to a neighbor who also owns lawn care equipment.

Step 2. Clean well your lawn mower

The second step to preparing a lawn mower for moving is to clean it from any remaining dirt and grass cuttings before loading it up on the moving truck. The idea, of course, is to prevent your other belongings from getting dirty and to keep the inside of the moving vehicle in decent condition.

Use a large sponge and water to wash your mower and pay special attention to its wheels and undercarriage.

Step 3. Remove all attachments and blades

For safety reasons, you’re going to need to remove the blades from your lawn mower before you load it up for transport. Consult the user’s manual of the machine if you’re not sure how to do it properly.

Use extra caution while handling the blades to avoid injuries. Use thick gloves while removing the cutting elements, then place the original protective covers over the sharp blades to secure them. Finally, wrap them up in large sheets of bubble wrap and pack them separately in a cardboard box.

Remove any other lawn mower attachments that can be safely removed and pack them separately.

Step 4. Disconnect the spark plug

The final step to preparing a lawn mower for a move is to disconnect its spark plug so that it can’t accidentally be started during transport. Even with its gas siphoned, a lawn mower can still be started in some cases because of the fuel fumes built-up in the tank.

Don’t take any risks! Just disconnect the spark plug (consult the user’s manual) of your mower, collapse its push handle and fix it to the equipment with some tape or a piece of string.

How to pack and load a lawn mower into a moving truck

Once you’ve completed the above preparation steps, the next packing and loading steps are relatively straightforward.

Here’s how to pack a lawn mower for a move, and then how to load it into a moving truck.

• Step 1. Wrap all removed attachments from the machine in bubble wrap (in case of sharp edges or fragile elements) or in plain packing paper.
• Step 2. Pack all detached parts in a separate box, seal it up and label it “LAWN MOWER PARTS”.
• Step 3. Roll your push lawn mower up the loading ramp and into the back of the pick-up truck or rented moving van.
• Step 4. Position the lawn mower with its wheels perpendicular to the wheels of the moving vehicle to minimize any movements during transport. Also, use straps or pieces of cord to secure the lawn equipment to the side of the truck and prevent any shifts altogether.
• Step 5. Place a moving blanket over the mower and secure it with some packing tape. This step will cushion possible contacts with other household items and will keep your lawn equipment dust-free during the haul.

How to move a riding lawn mower

All the preparation, packing and loading steps explain how to transport a push lawn mower. If you own a ride-on lawn mower, then the steps to moving it to a new home will be different.

Caution: The best way to move your riding lawn mower is to transport it safely in a trailer. The problem with loading riding mowers and lawn tractors into the bed of a pick-up truck or a rental van can be rather dangerous if not done properly.

Step 1. Purchase the right type of loading ramps

Remember that lawn mowers with cutting decks have very low ground clearance. This is why you’ll need to need arched ramps (not straight ones) so that your riding mower can clear the lip of your truck’s tailgate without any damage to the lawn equipment or the moving vehicle.

Also, keep in mind that the center of gravity of most riding lawn mowers is higher which could lead to the mower tipping back when it’s going up a steep incline. So, make sure the loading ramps you buy are long enough to eliminate any tipping risks.

Step 2. Secure the ramps on the truck

This step is crucial!

Unfold the loading ramps and position the plate ends on the edge of the tailgate. Then, use tie-down straps to secure the ramps to the moving truck.

Make absolutely sure that the straps are holding the ramps in place so that no loading accidents occur.

Step 3. Load the riding lawn mower

The safest way to load your riding mower into the truck is to drive it backward into the bed of the vehicle. Why? The heaviest part of the ride-on mower will be kept lower and that will eliminate any risks of the mower/tractor tipping over or flipping while going up the ramps.

If you’re not comfortable riding your mower backward, then drive it forward up the ramps and into the bed of the truck. Do it in low gear and do not stop and start up again midway on the ramps – if you must stop on the ramps, then let your mower roll all the way back to its starting position and try again.

Step 4. Secure the mower onto the truck

Once you’ve loaded the riding mower into the truck, set its parking brake and use tie-down straps to secure it for transport. During the haul itself, stop periodically to check that the tie-down straps have not loosed up and to ensure that the mower is secured.

Ethan is a relocation professional and an ex-moving coordinator. He has experience in handling relocations from start to finish with the consumer in mind. Now, Ethan is dedicated to sharing his knowledge with as many people as possible in order to help them have a better moving experience. Ethan Greenfield’s work has been featured in established industry organizations like Move for Hunger (Non profit organization) and The American Moving and Storage Association. His work has also been featured in mainstream medias like Zillow, BuzzFeed and others. You can contact Ethan directly at info@moving.tips

Ride On Loading Ramps

Do you need to move your ride on mower from on place to another?

Then a pair of these light weight folding ramps is the answer. Simply attached these ramps to your trailer and load your ride on mower!

This product is offered at a SPECIAL WEBSITE PRICE, which may be lower than the price advertised in store. From time to time the website advertised price will differ from the in store price. This practise allows us to monitor our online marketing campaigns. To take advantage of this great low price please remember to mention the online advertised price when in store at the time of purchase.

Visit One of Our SEVEN Superstores

Would you like to view or take a test drive of our extensive range in person? Then visit us at one of our 7 Superstore locations where a team member can run you through everything and help you find the perfect product to suit your needs.

Buy Online

All of our products can now be purchased through our website. You will currently see a BUY NOW option on most of our products. When you click this button you will continue to the purchase page where you can quickly and effortlessly complete your order with us (it is a very quick process). All online purchases offer free store pick up from any of our 7 RedShed Superstores.

Selected products also offer a flat rate shipping fee. When available, this option is clearly marked on the product pages. Alternatively, please call us on 03 9794 8339 if you would like a personalised delivery/ freight quote.

Important Information for Deliveries. If no one is home at the time of delivery then your order will be left at the front door. If you would like your order to be left elsewhere please add a note using the purchase page ‘order notes’ section. The RedShed uses Delivery Agents to deliver your goods. You agree that your details, including your Delivery Address, phone number and email address, will be supplied to the Delivery Agent for the purpose of delivering your Goods.

If a product you wish to purchase online does not yet have the BUY NOW option please either call us on 03 9794 8339 or email: marketing@theredshed.com.au and we will activate this product for you.

Please click to read our terms of use. privacy and delivery policies.

Email Us

Know what you’re after and want a quick sales process? Then you can email us your order and we will contact you straight away! Or, as you are looking through each of our products in detail you will also notice there is a quick enquiry form you can fill out.

Call Us

In the market for a particular product but would like a little more help? Then give your local store a call and a member of our expert sales team will point you in the right direction.

to get advice and be transferred to your closest store.

Top 10 Lawn Mower Ramps: Pros Cons Included

Purchasing any type of equipment can be overwhelming if you do not have sufficient knowledge. While purchasing ramps, especially, people do not invest that much thought in the buying process. This can be very harmful. Do you think I am exaggerating? Well, it is true. Overspending on ramps with a low value for money can be harmful to your and any low-quality ramp can collapse while using or poor craftsmanship can injure you.

Points to consider so you don’t sweat blood before making a purchase.

Lawnmower ramps are an essential piece of equipment especially for our gardener fellas who have to mow their lawn now and again. Here are a few points which you must consider before purchasing your set of lawn mower ramps.

• Vehicles like tractors and grass mowers have low ground clearance. This means that the gap between the vehicle’s base and the ground is very small. To tackle this, look for an arched ramp so the loading procedure would not damage the ramp or the vehicle.
• Lawnmowers are the kind of vehicles that have a non-uniform weight distribution. This problem occurs in many other automobiles, as well. To deal with this problem, purchase one with a higher load capacity so even there is a higher weight on one side than the other, the ramp would not collapse.
• The center of gravity is very important while transporting vehicles. Vehicles like lawnmowers and tractors have a comparatively higher center of gravity despite having a low ground clearance. Lawnmower ramps are usually longer which makes the loading easy.
• Aluminum ramps are always a winner either you look for lawn mower ramps or ramps for other automobiles. The natural protective coating on aluminum prevents the metal from oxidizing hence avoid any wear and tear. Aluminum is a lightweight metal as compared to steel or wood. This makes it suitable for ramps as it allows easy handling and transporting.

Top 10 Lawn Mower Ramps

Hopkins 11935MI Lift Rider Ramps

Guardian Dual Runner Shed Ramps

Motorhot Loading Ramps for Lawnmower

Pit Posse Pair Of Lawn Mower

Yaheetech Tri-Fold Lawnmower Ramp

2 Pcs Pair Loading Ramps for Lawn Mower

CARGOSMART 3092 Ramp For Lawn Equipment

VIVOHOME Loading Ramps for Lawn Mower

ZENY Loading Ramps for Lawn Mower

Ruedamann Loading Ramp for Lawn Tractors

Hopkins 11935MI Lift Rider Ramps

The innovative design of these ramps will blow your mind. Unlike any other set of ramps, they make your mower maintenance easy with its curved design. Made with durable plastic it can hold weight up-to 500 lbs per ramp. over, you can easily store it in less space.

• Allows easy maintenance of the vehiclenSturdy designnCorrosion-resistant nThe curved body allows rolling of the lawnmower instead of lifting tonEasy storage (stackable)

Guardian Dual Runner Shed Ramps

If you are looking for lawn mower ramps for sheds, it’s a good choice as it can weigh of 750lbs and allows secure operation. These lawn mower ramps have rung spacing of 3.5” and a 4” L-shaped lips with drilled holes for better traction and safe loading. With a durable aluminum body, not only they become lightweight but also corrosion-resistant.

• Sold as a pairnThe optional permanent mounting featurenJagged texture provides better grip nLightweightnHigh weight capacity

Motorhot Loading Ramps for Lawnmower

If you are seeking out for lawn mower ramps for vans, you might want to consider this one. The perforated design of these 7.5″ long ramps provide a perfect surface for loading. The lightweight aluminum body can lift to 1500lbs which works great for any heavy-duty vehicle. It provides a safe maneuver with its rubber-tipped fingers that increase grip.

Pit Posse Pair For Lawn Mower

These ramps are great for loading and unloading heavy vehicles. The sturdy aluminum body does not only provide a 1500lbs loading capacity but it also ensures durability and smooth operation. The joints, hinges, and crossbars are of great quality which confirms the stability so the ramp would not break while using. One of the great things about these ramps is that it does not require any assembling. Just unwrap your newly bought ramps and get to work.

Yaheetech Tri-Fold Lawnmower Ramp

Ideal as lawn mower ramps for pickup trucks, these ramps can support weight up to 1500lbs. The sturdy build offers better traction with top-quality joints, hinges, and crossbars that are welded to the rails. With a tri-fold design, it becomes portable and conveniently storable.

2 Pcs Pair Loading Ramps for Lawn Mower

These folding ramps offer a great deal for easy storage and portability. The premium aluminum build makes it great for heavy-duty vehicles like ATVs, lawnmowers, garden tractors, dirt bikes, etc. They support load up to 1500lbs with 91″x 11.5″ dimensions that go down to half the original size after folding.

CARGOSMART 3092 Ramp For Lawn Equipment

The innovative S-curved design works professionally in terms of traction, storage, and operation. The ramp is ideal for vehicles with small wheels including ATVs, lawnmowers and garden tractors. With the weight capacity of 750lbs, the loading procedure remains safe and smooth. The aluminum body offers many benefits including ease of handling, corrosion resistance, and durability.

VIVOHOME Loading Ramps for Lawn Mower

High-quality material and durable construction make them a great choice as lawn mower ramps for trucks. The curved structure provides a better grip so the ramp would not slip during loading and unloading. High weight capacity of 1500lbs makes it ideal for heavy vehicles like lawn, mowers, ATVs, and trucks, even with non-uniform weight distribution, loading with these ramps would not be a problem.

ZENY Loading Ramps for Lawn Mower

As lawn mower ramps for sheds, these ramps work great. With the ability to lift to 1500lbs, they ensure safe and convenient loading and unloading. The arched structure makes it ideal for four-wheeler vehicles like snow blowers and mowers. These ramps have a sturdy build with a weather-resistant texture. This also makes these ramps very low maintenance and easy to use.

• Safety straps includednArched design for better tractionnCorrosion-resistantnLightweightnFoldable

Ruedamann Loading Ramp for Lawn Tractors

Aluminum made, these ramps are low weight equipment that offers versatile and practical use. These ramps can lift up to 750lbs. The top headboard has a unique design that delivers better grip. This design makes it great for vehicles like garden tractors, dirt bikes, ATVs, lawnmowers, etc. The stamp’s structure is stable which prevents it from collapsing during loading.

Here comes a question in your mind, What should you buy, then?

If you are anxious about purchasing a new set of ramps, well, don’t be because it is a very simple decision if you know what your needs and requirements are, and you have done the research. You must know what are you looking for to get the right piece of equipment. Here is an easy way to deal with the daunting process of purchasing the right equipment:The 4Ws

What material are you looking for?

Aluminum is the best based on its multiple benefits but you can always opt for any other material based on the kind of environment you work in and your handling abilities.

Why do you need a set of ramps?

Ramps are used for various purposes. Loading/unloading of vehicles and wheelchairs, and even for houses and sheds too. The type of ramp that is to be used depends on your use. Loading wheelchairs require different types of ramps as compared to heavy-duty vehicles.

Where are you going to use them?

The ground and surroundings also matter while purchasing a ramp. Ramps are usually used outdoors which means that the ramp should be made of weather-resistant material. Steel is a good choice but it can heavy and hard to lift whereas wood can corrode in wet conditions. Hence, aluminum works the best.

Who is going to handle the ramp?

Believe me or not, it matters. Look for user-friendly ramps if you are newbie then handling a ramp might injure your wrist or back trying to lift the ramp. Also setting the ramps require some skills.

Vehiclejack.com Is A Participant In The Amazon Services LLC Associates Program, An Affiliate Advertising Program Designed To Provide A Means For Sites To Earn Advertising Fees.

report this ad report this ad report this ad

Z-Mower-52” 25HP Rental

Subject to availability. Call (803) 909-2400 for inventory.

Z-Mower-52” 25HP

Projects

• Commercial duty Z Mower for large area cutting and production
• Twin stick- Zero turn style controls
• Premium after cut appearance

Quick Specs

• 25Hp Kohler Command engine
• 52” deck- 3 Blade design
• 5 mph max ground speed
• 1”-5.5” adjustable cutting height

Also carried at the following locations near: Rock Hill, SC 29730

Equipment subject to availability. Call (803) 909-2400 for inventory.

Pineville, NC 28134-8822

Store #HD3601 | (704) 541-4350 | 9.5 Mi. 10210 Centrum PkwyPineville, NC 28134-8822

Delivery Available

Charlotte, NC 28211-1129

Store #HD3608 | (704) 367-9404 | 17.8 Mi. 1220 N Wendover RdCharlotte, NC 28211-1129

Delivery Available

Matthews, NC 28105

Store #HD3602 | (704) 841-7410 | 18.5 Mi. 1837 Matthews Twnsp PkwyMatthews, NC 28105

Delivery Available

The Home Depot Rental provides large equipment, tools, trucks and trailers at more than 1,100 convenient locations. Save time and money by renting the pro-grade tools and equipment you need in one place.

Delivery Pickup Available for Large Equipment Rentals. Minimum 1-day rental.

Sign Up for Email

Receive exclusive offers and stay up-to-date on new products and services.

Connect with Us

• Privacy Security Statement
• About Us
• Our Partners
• FAQs
• Careers
• Blog
• Contact Us
• Used Equipment for Sale
• 1-888-266-7228

• Fraud Alert
• Sitemap
• Do Not Sell My Personal Information
• Limit the Use of My Sensitive Personal Information
• California Privacy Rights Report
• HomeDepot.com

• © 2023 Home Depot Product Authority, LLC. All rights reserved.

Help us improve this website by providing your feedback.

The documentation within this section provides general safety information and operating instructions by equipment type. Specific controls, functionality and operating instructions can vary by brand, model and year. It is up to you, the operator, to ensure your own safety. This documentation is secondary to the manufacturer’s instructions provided to you within the operations manual located on each machine. If an operations manual is not available on the machine, please contact our 24/7 Customer Care Center at 1-888-266-7228. The manuals can also be viewed and downloaded from our website at the following address compactpowerrents.com/manuals-specifications.

Terms and Conditions

Product specifications and are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death.

Get the latest promotions, news, and project tips for DIYers PROs.

Thanks for your submission!

Sorry, but we ran into a problem. Please try again.